Manufacturer Catalog
Otto

Momentary action, military spec (M8805/110-1561), sealed sub-subminiature push button snap-action Switch. The P7 series incorporates OTTO's patented double break design in a significantly smaller package. These subminiature Switches embrace today's technology requirements by allowing for a large number of Switches to fit within a faceplate. The long life snap-action design is protected from the environment by a silicon rubber boot. This version offers a short body, is watertight, has solder Terminals, has 2 circuit low level Switching, a black bezel and red button.

MPN: 5930-01-519-7052

Pushbutton Switch, style B, sealed military grade pushbutton Switch. Screw Terminals, normal open circuitry, 2.5LBS momentary action, black button.

MPN: 5930-01-523-1919

Momentary Action, Two Step, Custom Pushbutton Switch. Turret Terminals, black bezel, and red button.

MPN: 5930-01-531-5318

Sealed pushbutton Switch. Momentary action, snap action with positive tactile feel. Normally open. Solder Terminals. Black body, red button. Rated at 10 amps.

MPN: 5930-01-542-1219

Rugged toggle Switch. Non teasable. Lightweight, miniature and ruggedized snap-action. Shorter behind Panel depth. Locked out of center position. See spec sheet.Single pole. Off-None-On. 15/32 bushing. Gold contacts.

MPN: 5930-01-542-2852

Transducer with pushbutton. The Otto Transducer takes a force input of up to 3 lbs. and converts it into a linear voltage output on an X and Y axis. Button is made of black delrin. Case is black, anodized aluminum. 1,000,000 cycle mechanical / electrical life. Pull off force is 15 pounds, actuation force is 2.75 pounds. Please refer to specifications for additional information.

MPN: 5930-01-542-8759

Sealed pushbutton Switch, 2 circuit, watertight seal, momentary snap action, black.

MPN: 5930-01-548-7479

4 way toggle trim Switch. The T4 Mini Trim is a single pole, 4 throw, center off, momentary contact (self return to center off). Numerous button styles are available on both the Commercial and Military grade Switch versions. Mini Trims are typically press fit into control Grip or Panel mounted using versions with an 11/16 threaded case. Mini Trims are also available with multiple sealing levels to fit all applications. Please see attached PDF for the T4-0043, M9419/2-002 version.

MPN: 5930-01-560-3157

Rugged, watertight pushbutton Switch per MIL-STD-810, 15/32 thread. SPST, Normally open, double break. Red Button, black anodized case.

MPN: 5930-01-562-4166

Trigger Switch, DPDT, FEDERAL STOCK NUMBER STK 5930-01-565-3426 2 detents. PDF attached-photo shown is similar, not exact. Similar to OTTO Controls U2-016 but with gray button.

MPN: 5930-01-565-3426

Special pushbutton Switch with knurled shroud. P1 series are sealed, Mil Grade MIL-PRF-8805/3 Momentary Action, Snap Action, Double Break. See attached PDF.

MPN: 5930-01-567-4286

Rugged military grade miniature toggle Switch. Lightweight, miniature and ruggedized snap-action. Positive detent action for safe Switching operation. Sealed. No tease contact operation.2 pole. On-off-on. 15/32'' bushing.

MPN: 5930-01-568-6822

4-way military stadium press fit IP6 dusttight standard, gray.

MPN: 5930-01-568-6823

Rugged duty Sealed limit Switch. Double Pole Double Throw. Roller Actuator. 72"" lead wire. MS27240-3 per MIL-S-8805/43.

MPN: 5930-01-573-9775

Pushbutton Switch Momentary Action, Two Step DPDT-double break custom Pushbutton Switch -40 threads, black aluminum alloy case and button. Ring Panel seal, watertight Panel seal, all Hardware included.

MPN: 5930-01-584-7677