Manufacturer Catalog
Otto

Snap action pushbutton Switch, watertight to MIL-PRF-M8805, black, 28VDC NSN FEDSTK 5930-01-362-0430 . See PDF drawing here.

MPN: 5930-01-362-0430

Trim Switch Toggle: SPST-NO, ON-OFF-ON Pushbutton: DPST-NO double break. Rating: 1 amp Resistive0.5 amp Inductive. Electrical Life: 50,000 cycles. Seal: Enclosure Design 4, resilient per MIL-PRF-8805. Button: Black nylon. Case: Black anodized aluminum alloy. The T2 series provides two functions in one compact Switch: toggle and pushbutton action. Features toggle lockout when pushbutton mode is actuated and pushbutton lockout when in toggle mode. A resilient seal in the plunger provides splash proof and dust tight seal.

MPN: 5930-01-376-0911

4 way min trim Switch. Meets mil spec M9419/2-004. Dust tight to IP64 & Watertight to IP68S. Mini Trims are typically press fit into control Grip or Panel mounted using versions with an 11/16" threaded case. S Switch is capable of withstanding a force of 20.0 lbs. applied to the actuating button. The button also withstands 15.0 lbs. minimum pull force. Black case and button. See the attached PDF for additional specifications.

MPN: 5930-01-376-3002

P4 - Momentary Action, Two Step, Custom Pushbutton Switch, Turret Terminals, DPDT 8 Terminal circuitry, momentary Switching action, black bezel and black button.

MPN: 5930-01-408-4582

Rugged sealed pushbutton Switch with horn symbol. SPST Normally Open, Yellow & Black Horn Legend, Water tight to IP68S, faston Terminals.

MPN: 5930-01-423-3691

P4 - Momentary Action, Two Step, Custom Pushbutton Turret Terminals, DPDT 6 Terminals, momentary Switching action, red button. Allow 8 weeks delivery if no stock is shown.

MPN: 5930-01-426-8984

Special Rugged Snap Action Mini Pushbutton Switch . Two circuit. Dust & moisture tight. Red .375 button. Silicon rubber seal gives long life and smooth operation. See PDF drawing here.

MPN: 5930-01-433-9510

Momentary sealed, snap action, double break pushbutton Switch. The P1 offers a mechanical life that is well beyond the 50,000 cycles required by MIL-PRF-8805. The double break Switching mechanism has an incredibly fast transfer time, reducing arcing and increasing contact life. The inherent wiping action breaks welds and scrubs the contacts clean on every actuation. The P1 Switch offers vastly improved life under extreme conditions found in most military environments. This version is a special Single pole, normally open double break, .50 tall gray button, black alum case, dust tight design 2. See PDF.

MPN: 5930-01-441-5123

Pushbutton Switch subminiature. P7-300014 is a sealed, Mil Grade MIL-PRF-8805/110, Momentary Action SPDT- DB (double break) pushbutton swich, black anodized, D-flat on case, . 312 diameter black nylon button. DESIGN 2 MIL Sealed. Design 2 sealed to IP68S & MIL-PRF-8805. NSN 5930-01-445-7947.

MPN: 5930-01-445-7947

Rugged military grade miniature toggle Switch. Lightweight, miniature and ruggedized snap-action. Positive detent action for safe Switching operation. Sealed. No tease contact operation. 2 pole. On (momentary)-none-on. 15/32'' bushing.

MPN: 5930-01-450-1819

Sealed Military Spec Pushbutton Switch. 10A, normally closed, SPST, Screw Terminals, push pull maintained, Black Button. MS25089-2C-1. Hardware included. Same as Otto P1-32232

MPN: 5930-01-450-6726

4 way toggle trim Switch. Single pole, 4 throw, center off, momentary contact. Self return to center off. 1 amp inductive at 28 VDC, 100,000 cycles. Please refer to specifications for additional information.

MPN: 5930-01-464-4642

Limit Switch. P6-20018 except molded rubber exit header. It is 4PDT, stainless steel housing, 22AWG wire leads.

MPN: 5930-01-468-5473

Limit Switch

MPN: 5930-01-503-3445

The P7 series subminiature Switches embrace today's technology requirements by allowing for a large number of Switches to fit within a faceplate or a small Panel space.The long life snap-action design offers low contact resistance (25 milliohms max initial) and is protected from the environment by a silicone rubber boot, operating on a rolling sleeve principle that gives long sealed life and smooth operation. The P7 series is designed to meet the requirements of MIL-PRF-8805 including low level Switching (10mA @ 30mV) with power Switching up to 5 amps at 28VDC as well.

MPN: 5930-01-509-2251