Manufacturer Catalog
Otto

Special 4 way toggle Switch with an operating force of 24-30 ounces. This OTTO mini trim Switch has SPST ( 4 Switches), quiet operation, sealed, momentary action. Please refer to pdf.

MPN: 5930-01-115-9238

Switch. The T2-0011 features two functions in one Switch; Pushbutton & Toggle. Type 4 Resilient Seal per MIL-S-8805. Features toggle lockout when pushbutton mode is actuated Pushbutton lockout when in toggle mode. Splash proof and dust tight seal.

MPN: 5930-01-118-0131

Pushbutton Switch. Double pole double throw double break. Splash and Dusttight Sealed, 2 Pole, 4 Circuit. Operating Force: 4.0 lbs. +/- 1.0 lb. Circuit: DPDT 4 circuit. Rating: 5 amps Resistive 3 amps, Inductive Contacts: Gold plate per MIL-PRF-8805/101-010, Button: Black nylon.

MPN: 5930-01-123-9994

Temperature range between -55 C to + 85 C. 28 VDC or 115 VAC, 10 Amp. Dust tight. Per MIL-S-8805, design 2. Nylon grey button. Black and anodized aluminum alloy case. 2 circuits. Please see drawing for more information.

MPN: 5930-01-143-9156

Special mini pushbutton Switch white button.

MPN: 5930-01-164-8263

Subminiature pushbutton, snap action Switch, solder Terminal, N.O. black bezel, red button. Meets the requirements of MIL-PRF-8805 with up to 5 amps at 28VDC.

MPN: 5930-01-185-6047

Toggle Switch

MPN: 5930-01-187-8027

Pushbutton Switch, sealed against dust & moisture The P7 series incorporates OTTO's patented double break design in a significantly smaller package than the P1 series. These subminiature Switches embrace today's technology requirements by allowing for a large number of Switches to fit within a faceplate. The long life snap-action design is protected from the environment by a silicon rubber boot, operating on a patented rolling sleeve principle that gives long sealed life. This version is a military grade momentary action, normally open, 2 circuit Switch with a black body and gray guarded button. Solder Terminals.

MPN: 5930-01-187-8796

Special Press-fit Switch, 10 amps (resistive)and 1050VRMS at 28VDC or 115VAC, gray thermoplastic button, SPDT, watertight per MIL-PRF-8805 design 3, temperature range -55 degress C to 85 degress C

MPN: 5930-01-188-1490

The P1-10052 is a sealed push button Switch with 4 LBS. momentary action. Snap action mil grade, double break Switch plus this version is a 2 circuit pushbutton Switch. Solder Terminals. Gray button (picture shows black but Switch button is gray).

MPN: 5930-01-188-1491

Subminiature mil spec push button Switch. Solder Terminals, 2 circuit momentary. Sealed with black case and gray pushbutton.

MPN: 5930-01-188-4330

Special 4 way toggle Switch, with 11/16 thread on case. Single pole 4 throw. Center off. Momentary contact with self return to center off. Black button. See attached PDF for more specs!

MPN: 5930-01-212-7286

Pushbutton Switch, sealed against dust & moisture The P7 series incorporates OTTO's patented double break design in a significantly smaller package than the P1 series. These subminiature Switches embrace today's technology requirements by allowing for a large number of Switches to fit within a faceplate. The long life snap-action design is protected from the environment by a silicon rubber boot, operating on a patented rolling sleeve principle that gives long sealed life. This version is a military grade momentary action, normally open, 2 circuit Switch with a black body and button. Solder Terminals.

MPN: 5930-01-212-7288

5930-01-216-8552 Push Switch

MPN: 5930-01-216-8552

Subminiature basic switch, double break, snap-action, military grade, .20 inches wide, has 1/8 inch long turret Terminals, 5 oz operating force, SPDT-DB, Form Z, and silver/gold high current contacts.

MPN: 5930-01-220-6193