Pushbutton Switch. Double pole double throw double break. Splash and Dusttight Sealed, 2 Pole, 4 Circuit. Operating Force: 4.0 lbs. +/- 1.0 lb. Circuit: DPDT 4 circuit. Rating: 5 amps Resistive 3 amps, Inductive Contacts: Gold plate per MIL-PRF-8805/101-010, Button: Black nylon.
MPN: 5930-01-123-9994
Manufacturer: Otto
Temperature range between -55 C to + 85 C. 28 VDC or 115 VAC, 10 Amp. Dust tight. Per MIL-S-8805, design 2. Nylon grey button. Black and anodized aluminum alloy case. 2 circuits. Please see drawing for more information.
MPN: 5930-01-143-9156
Manufacturer: Otto
Special mini pushbutton Switch white button.
MPN: 5930-01-164-8263
Manufacturer: Otto
Subminiature pushbutton, snap action Switch, solder Terminal, N.O. black bezel, red button. Meets the requirements of MIL-PRF-8805 with up to 5 amps at 28VDC.
MPN: 5930-01-185-6047
Manufacturer: Otto
Pushbutton Switch, sealed against dust & moisture The P7 series incorporates OTTO's patented double break design in a significantly smaller package than the P1 series. These subminiature Switches embrace today's technology requirements by allowing for a large number of Switches to fit within a faceplate. The long life snap-action design is protected from the environment by a silicon rubber boot, operating on a patented rolling sleeve principle that gives long sealed life. This version is a military grade momentary action, normally open, 2 circuit Switch with a black body and gray guarded button. Solder Terminals.
MPN: 5930-01-187-8796
Manufacturer: Otto
Special Press-fit Switch, 10 amps (resistive)and 1050VRMS at 28VDC or 115VAC, gray thermoplastic button, SPDT, watertight per MIL-PRF-8805 design 3, temperature range -55 degress C to 85 degress C
MPN: 5930-01-188-1490
Manufacturer: Otto
The P1-10052 is a sealed push button Switch with 4 LBS. momentary action. Snap action mil grade, double break Switch plus this version is a 2 circuit pushbutton Switch. Solder Terminals. Gray button (picture shows black but Switch button is gray).
MPN: 5930-01-188-1491
Manufacturer: Otto
Subminiature mil spec push button Switch. Solder Terminals, 2 circuit momentary. Sealed with black case and gray pushbutton.
MPN: 5930-01-188-4330
Manufacturer: Otto
Special 4 way toggle Switch, with 11/16 thread on case. Single pole 4 throw. Center off. Momentary contact with self return to center off. Black button. See attached PDF for more specs!
MPN: 5930-01-212-7286
Manufacturer: Otto
Pushbutton Switch, sealed against dust & moisture The P7 series incorporates OTTO's patented double break design in a significantly smaller package than the P1 series. These subminiature Switches embrace today's technology requirements by allowing for a large number of Switches to fit within a faceplate. The long life snap-action design is protected from the environment by a silicon rubber boot, operating on a patented rolling sleeve principle that gives long sealed life. This version is a military grade momentary action, normally open, 2 circuit Switch with a black body and button. Solder Terminals.
MPN: 5930-01-212-7288
Manufacturer: Otto
Subminiature basic switch, double break, snap-action, military grade, .20 inches wide, has 1/8 inch long turret Terminals, 5 oz operating force, SPDT-DB, Form Z, and silver/gold high current contacts.
MPN: 5930-01-220-6193
Manufacturer: Otto
Rugged military grade miniature toggle Switch. Lightweight, miniature and ruggedized snap-action. Positive detent action for safe Switching operation. Sealed. No tease contact operation. 1 pole. On-none-on. 15/32'' bushing.
MPN: 5930-01-222-3158
Manufacturer: Otto
Rugged military grade miniature toggle Switch. Lightweight, miniature and ruggedized snap-action. Positive detent action for safe Switching operation. Sealed. No tease contact operation. 1 pole. On (momentary)- off - on (momentary). 15/32'' bushing.
MPN: 5930-01-226-0467
Manufacturer: Otto
Limit Switch, SPST, 7 amps (resistive) @ 28VDC/115VAC, Qualified per MIL-PRF-8805/4, stainless steel housing and plunger.
MPN: 5930-01-258-9663
Manufacturer: Otto
Pushbutton Switch - special case, .38 inch red button, 10A resistive at 28VDC or 115VAC, watertight per MIL-PRF-8805, Design 3, Temperature range -55 degrees C to +65 degrees C.
MPN: 5930-01-258-9669
Manufacturer: Otto
Rugged Snap Action Pushbutton Switch. Normally Open. Dust tight. Internal silicon rubber boot seals out contaminants. Black.160 button. 5 amps@28vdc.Solder Terminals.
MPN: 5930-01-276-2975
Manufacturer: Otto
Sealed push button Switch, normally open, 2.5 lbs operating force, normally open , positive tactile feedback, red button, solder Terminals. Makes and breaks every time! Less than 25 milliohms contact resistance because the OTTO design features inherent rocking action that breaks welds and wipes contacts clean. The P3-71111 is the commercial version of the P1 Pushbutton Switch, offering vastly improved life under extreme conditions found in some industrial environments. The pushbutton is sealed by a silicone boot operating on our patented rolling sleeve, providing longer life and smoother operation over a wide temperature range.
MPN: 5930-01-291-4885
Manufacturer: Otto
Special Rugged Snap Action Mini Pushbutton Switch. 2 circuit. Dust & moisture tight. Black .375 button. Silicon rubber seal gives long life and smooth operation. See PDF Drawing here.
MPN: 5930-01-295-8496
Manufacturer: Otto
Switch, Locking toggle. (3 POLE - 3 POS.). Basic Switch elements per MIL-PRF-8805/4 except with integral lever. Electrical life: 25,000 cycles. See drawing for more information.
MPN: 5930-01-297-0821
Manufacturer: Otto
Precision mil spec trigger Switch. 7 amps @ 28 VDC. 2 pole Black housing, red button. Mil qualified to M8805/111-01.
MPN: 5930-01-298-2214
Manufacturer: Otto
Push button Switch. Sub miniature. Long life. 5 amp sealed momentary snap action Mil Spec with positive tactile feedback. Same as part # P7-331222.
MPN: 5930-01-303-4812
Manufacturer: Otto
Push button Switch. Sub miniature. Long life. 5 amp sealed momentary snap action Mil Spec with positive tactile feedback. Same as part # P7-531122.
MPN: 5930-01-304-4353
Manufacturer: Otto
Pushbutton Switch. This is a sealed, SPDT, 2 Circuit, black button, shrouded black anodized case with drain hole.
MPN: 5930-01-320-7829
Manufacturer: Otto
Snap action pushbutton Switch, watertight to MIL-PRF-M8805, black, 28VDC NSN FEDSTK 5930-01-362-0430 . See PDF drawing here.
MPN: 5930-01-362-0430
Manufacturer: Otto
Trim Switch Toggle: SPST-NO, ON-OFF-ON Pushbutton: DPST-NO double break. Rating: 1 amp Resistive0.5 amp Inductive. Electrical Life: 50,000 cycles. Seal: Enclosure Design 4, resilient per MIL-PRF-8805. Button: Black nylon. Case: Black anodized aluminum alloy. The T2 series provides two functions in one compact Switch: toggle and pushbutton action. Features toggle lockout when pushbutton mode is actuated and pushbutton lockout when in toggle mode. A resilient seal in the plunger provides splash proof and dust tight seal.
MPN: 5930-01-376-0911
Manufacturer: Otto
4 way min trim Switch. Meets mil spec M9419/2-004. Dust tight to IP64 & Watertight to IP68S. Mini Trims are typically press fit into control Grip or Panel mounted using versions with an 11/16" threaded case. S Switch is capable of withstanding a force of 20.0 lbs. applied to the actuating button. The button also withstands 15.0 lbs. minimum pull force. Black case and button. See the attached PDF for additional specifications.
MPN: 5930-01-376-3002
Manufacturer: Otto
P4 - Momentary Action, Two Step, Custom Pushbutton Switch, Turret Terminals, DPDT 8 Terminal circuitry, momentary Switching action, black bezel and black button.
MPN: 5930-01-408-4582
Manufacturer: Otto
Rugged sealed pushbutton Switch with horn symbol. SPST Normally Open, Yellow & Black Horn Legend, Water tight to IP68S, faston Terminals.
MPN: 5930-01-423-3691
Manufacturer: Otto
P4 - Momentary Action, Two Step, Custom Pushbutton Turret Terminals, DPDT 6 Terminals, momentary Switching action, red button. Allow 8 weeks delivery if no stock is shown.
MPN: 5930-01-426-8984
Manufacturer: Otto
This item has been added to your cart!