Special Rugged Snap Action Mini Pushbutton Switch . Two circuit. Dust & moisture tight. Red .375 button. Silicon rubber seal gives long life and smooth operation. See PDF drawing here.
MPN: 5930-01-433-9510
Manufacturer: Otto
Momentary sealed, snap action, double break pushbutton Switch. The P1 offers a mechanical life that is well beyond the 50,000 cycles required by MIL-PRF-8805. The double break Switching mechanism has an incredibly fast transfer time, reducing arcing and increasing contact life. The inherent wiping action breaks welds and scrubs the contacts clean on every actuation. The P1 Switch offers vastly improved life under extreme conditions found in most military environments. This version is a special Single pole, normally open double break, .50 tall gray button, black alum case, dust tight design 2. See PDF.
MPN: 5930-01-441-5123
Manufacturer: Otto
Pushbutton Switch subminiature. P7-300014 is a sealed, Mil Grade MIL-PRF-8805/110, Momentary Action SPDT- DB (double break) pushbutton swich, black anodized, D-flat on case, . 312 diameter black nylon button. DESIGN 2 MIL Sealed. Design 2 sealed to IP68S & MIL-PRF-8805. NSN 5930-01-445-7947.
MPN: 5930-01-445-7947
Manufacturer: Otto
Rugged military grade miniature toggle Switch. Lightweight, miniature and ruggedized snap-action. Positive detent action for safe Switching operation. Sealed. No tease contact operation. 2 pole. On (momentary)-none-on. 15/32'' bushing.
MPN: 5930-01-450-1819
Manufacturer: Otto
Sealed Military Spec Pushbutton Switch. 10A, normally closed, SPST, Screw Terminals, push pull maintained, Black Button. MS25089-2C-1. Hardware included. Same as Otto P1-32232
MPN: 5930-01-450-6726
Manufacturer: Otto
4 way toggle trim Switch. Single pole, 4 throw, center off, momentary contact. Self return to center off. 1 amp inductive at 28 VDC, 100,000 cycles. Please refer to specifications for additional information.
MPN: 5930-01-464-4642
Manufacturer: Otto
Limit Switch. P6-20018 except molded rubber exit header. It is 4PDT, stainless steel housing, 22AWG wire leads.
MPN: 5930-01-468-5473
Manufacturer: Otto
The P7 series subminiature Switches embrace today's technology requirements by allowing for a large number of Switches to fit within a faceplate or a small Panel space.The long life snap-action design offers low contact resistance (25 milliohms max initial) and is protected from the environment by a silicone rubber boot, operating on a rolling sleeve principle that gives long sealed life and smooth operation. The P7 series is designed to meet the requirements of MIL-PRF-8805 including low level Switching (10mA @ 30mV) with power Switching up to 5 amps at 28VDC as well.
MPN: 5930-01-509-2251
Manufacturer: Otto
Momentary action, military spec (M8805/110-1561), sealed sub-subminiature push button snap-action Switch. The P7 series incorporates OTTO's patented double break design in a significantly smaller package. These subminiature Switches embrace today's technology requirements by allowing for a large number of Switches to fit within a faceplate. The long life snap-action design is protected from the environment by a silicon rubber boot. This version offers a short body, is watertight, has solder Terminals, has 2 circuit low level Switching, a black bezel and red button.
MPN: 5930-01-519-7052
Manufacturer: Otto
Pushbutton Switch, style B, sealed military grade pushbutton Switch. Screw Terminals, normal open circuitry, 2.5LBS momentary action, black button.
MPN: 5930-01-523-1919
Manufacturer: Otto
Momentary Action, Two Step, Custom Pushbutton Switch. Turret Terminals, black bezel, and red button.
MPN: 5930-01-531-5318
Manufacturer: Otto
Sealed pushbutton Switch. Momentary action, snap action with positive tactile feel. Normally open. Solder Terminals. Black body, red button. Rated at 10 amps.
MPN: 5930-01-542-1219
Manufacturer: Otto
Rugged toggle Switch. Non teasable. Lightweight, miniature and ruggedized snap-action. Shorter behind Panel depth. Locked out of center position. See spec sheet.Single pole. Off-None-On. 15/32 bushing. Gold contacts.
MPN: 5930-01-542-2852
Manufacturer: Otto
Transducer with pushbutton. The Otto Transducer takes a force input of up to 3 lbs. and converts it into a linear voltage output on an X and Y axis. Button is made of black delrin. Case is black, anodized aluminum. 1,000,000 cycle mechanical / electrical life. Pull off force is 15 pounds, actuation force is 2.75 pounds. Please refer to specifications for additional information.
MPN: 5930-01-542-8759
Manufacturer: Otto
Sealed pushbutton Switch, 2 circuit, watertight seal, momentary snap action, black.
MPN: 5930-01-548-7479
Manufacturer: Otto
4 way toggle trim Switch. The T4 Mini Trim is a single pole, 4 throw, center off, momentary contact (self return to center off). Numerous button styles are available on both the Commercial and Military grade Switch versions. Mini Trims are typically press fit into control Grip or Panel mounted using versions with an 11/16 threaded case. Mini Trims are also available with multiple sealing levels to fit all applications. Please see attached PDF for the T4-0043, M9419/2-002 version.
MPN: 5930-01-560-3157
Manufacturer: Otto
Rugged, watertight pushbutton Switch per MIL-STD-810, 15/32 thread. SPST, Normally open, double break. Red Button, black anodized case.
MPN: 5930-01-562-4166
Manufacturer: Otto
Trigger Switch, DPDT, FEDERAL STOCK NUMBER STK 5930-01-565-3426 2 detents. PDF attached-photo shown is similar, not exact. Similar to OTTO Controls U2-016 but with gray button.
MPN: 5930-01-565-3426
Manufacturer: Otto
Special pushbutton Switch with knurled shroud. P1 series are sealed, Mil Grade MIL-PRF-8805/3 Momentary Action, Snap Action, Double Break. See attached PDF.
MPN: 5930-01-567-4286
Manufacturer: Otto
Rugged military grade miniature toggle Switch. Lightweight, miniature and ruggedized snap-action. Positive detent action for safe Switching operation. Sealed. No tease contact operation.2 pole. On-off-on. 15/32'' bushing.
MPN: 5930-01-568-6822
Manufacturer: Otto
4-way military stadium press fit IP6 dusttight standard, gray.
MPN: 5930-01-568-6823
Manufacturer: Otto
Rugged duty Sealed limit Switch. Double Pole Double Throw. Roller Actuator. 72"" lead wire. MS27240-3 per MIL-S-8805/43.
MPN: 5930-01-573-9775
Manufacturer: Otto
Pushbutton Switch Momentary Action, Two Step DPDT-double break custom Pushbutton Switch -40 threads, black aluminum alloy case and button. Ring Panel seal, watertight Panel seal, all Hardware included.
MPN: 5930-01-584-7677
Manufacturer: Otto
Toggle Switch Guard. Spring loaded cover locks in up or down position. Red molded front cover. Black painted steel bracket. Military qualified but used on many commercial applications as well. Switch not included.
MPN: 5930-01-589-0974
Manufacturer: Otto
Sealed rugged dome momentary pushbutton Switch. 2 circuit. Dust tight IP64. Red flush dome button. Plastic housing. These can be shipped to you in 2-3 working days. They are built for you from stock components. "Disregard any out of stock notice, because we custom assemble them, however, they are NCNR." Assembly items that are in stock need at least 24 hours to process prior to shipping.
MPN: 5930-01-591-1323
Manufacturer: Otto
Sealed subminature special double break pushbutton Switch. Low level Switching, SPDT-DB, 2 circuit, waterproof to 1.4 PSI, press fit , black anodized case. See pdf for additional specs please.
MPN: 5930-01-604-0431
Manufacturer: Otto
4-way plus center pushbutton mini trim Switch, 5 pos, low level Switching, IP68S sealing, 1 pole, monetary center push.
MPN: 5930-01-604-1196
Manufacturer: Otto
4 way toggle Switch. DESIGN SYMBOL 3 seal, Low level, black button. See PDF here.
MPN: 5930-01-604-1234
Manufacturer: Otto
Rugged military grade miniature toggle Switch. Lightweight, miniature and ruggedized snap-action. Positive detent action for safe Switching operation. Sealed. No tease contact operation.1 pole. On-off-on. 15/32'' bushing. Allow 6-7 week leadtimes for quantities greater than what we show here.
MPN: 5930-01-614-5739
Manufacturer: Otto
This item has been added to your cart!