Mil/aero toggle rugged miniature toggle Switch. The most popular of OTTO's miniature positive action toggle Switches, Miniature Positive Action, 5A @ 28 VDC, 3A @ 115 VAC 400 Hertz, 2A @ 115 VAC 60 Hertz Resistive Load, D.P.D.T. Momentary ON-NONE-ON circuitry, Bushing Seal, Solder-Lug Terminals. Mil spec to MS90311-231. MS90311-231, OTTO TE-11231 is a Military Qualified Toggle Switch. Positive action, snap action, environmentally sealed, non teasable toggle. Sealed per MIL-DTL-8834, . 2 pole. On - none-on. 15/32" Bushing.
MPN: 5930-00-913-2983
Manufacturer: Otto
Sealed Military Spec Pushbutton Switch. 10A, normally open SPST, Screw Terminals, Momentary, Red Button. MS25089-1FR. Comes with mounting support nut. Same as Otto P1-62121
MPN: 5930-01-022-2076
Manufacturer: Otto
Sealed Military Spec Pushbutton Switch. 10A, 2 circuit, Screw Terminals, Momentary, White Button. Hardware included. Same as Otto P1-62629.
MPN: 5930-01-075-6807
Manufacturer: Otto
Special 4 way toggle Switch with an operating force of 24-30 ounces. This OTTO mini trim Switch has SPST ( 4 Switches), quiet operation, sealed, momentary action. Please refer to pdf.
MPN: 5930-01-115-9238
Manufacturer: Otto
Switch. The T2-0011 features two functions in one Switch; Pushbutton & Toggle. Type 4 Resilient Seal per MIL-S-8805. Features toggle lockout when pushbutton mode is actuated Pushbutton lockout when in toggle mode. Splash proof and dust tight seal.
MPN: 5930-01-118-0131
Manufacturer: Otto
Pushbutton Switch. Double pole double throw double break. Splash and Dusttight Sealed, 2 Pole, 4 Circuit. Operating Force: 4.0 lbs. +/- 1.0 lb. Circuit: DPDT 4 circuit. Rating: 5 amps Resistive 3 amps, Inductive Contacts: Gold plate per MIL-PRF-8805/101-010, Button: Black nylon.
MPN: 5930-01-123-9994
Manufacturer: Otto
Temperature range between -55 C to + 85 C. 28 VDC or 115 VAC, 10 Amp. Dust tight. Per MIL-S-8805, design 2. Nylon grey button. Black and anodized aluminum alloy case. 2 circuits. Please see drawing for more information.
MPN: 5930-01-143-9156
Manufacturer: Otto
Controls mil grade pushbutton snap action Switch for low level Switching. Sealed with momentary action, normally open. 4 LBS momentary Switch action. Screw Terminals. Black body & button. Hardware is included. Mil qualified to MS25089-1CL. Same as Otto P1-34122.
MPN: 5930-01-163-3415
Manufacturer: Otto
Special mini pushbutton Switch white button.
MPN: 5930-01-164-8263
Manufacturer: Otto
Subminiature pushbutton, snap action Switch, solder Terminal, N.O. black bezel, red button. Meets the requirements of MIL-PRF-8805 with up to 5 amps at 28VDC.
MPN: 5930-01-185-6047
Manufacturer: Otto
Pushbutton Switch, sealed against dust & moisture The P7 series incorporates OTTO's patented double break design in a significantly smaller package than the P1 series. These subminiature Switches embrace today's technology requirements by allowing for a large number of Switches to fit within a faceplate. The long life snap-action design is protected from the environment by a silicon rubber boot, operating on a patented rolling sleeve principle that gives long sealed life. This version is a military grade momentary action, normally open, 2 circuit Switch with a black body and gray guarded button. Solder Terminals.
MPN: 5930-01-187-8796
Manufacturer: Otto
Special Press-fit Switch, 10 amps (resistive)and 1050VRMS at 28VDC or 115VAC, gray thermoplastic button, SPDT, watertight per MIL-PRF-8805 design 3, temperature range -55 degress C to 85 degress C
MPN: 5930-01-188-1490
Manufacturer: Otto
The P1-10052 is a sealed push button Switch with 4 LBS. momentary action. Snap action mil grade, double break Switch plus this version is a 2 circuit pushbutton Switch. Solder Terminals. Gray button (picture shows black but Switch button is gray).
MPN: 5930-01-188-1491
Manufacturer: Otto
Subminiature mil spec push button Switch. Solder Terminals, 2 circuit momentary. Sealed with black case and gray pushbutton.
MPN: 5930-01-188-4330
Manufacturer: Otto
Special 4 way toggle Switch, with 11/16 thread on case. Single pole 4 throw. Center off. Momentary contact with self return to center off. Black button. See attached PDF for more specs!
MPN: 5930-01-212-7286
Manufacturer: Otto
Pushbutton Switch, sealed against dust & moisture The P7 series incorporates OTTO's patented double break design in a significantly smaller package than the P1 series. These subminiature Switches embrace today's technology requirements by allowing for a large number of Switches to fit within a faceplate. The long life snap-action design is protected from the environment by a silicon rubber boot, operating on a patented rolling sleeve principle that gives long sealed life. This version is a military grade momentary action, normally open, 2 circuit Switch with a black body and button. Solder Terminals.
MPN: 5930-01-212-7288
Manufacturer: Otto
Subminiature basic switch, double break, snap-action, military grade, .20 inches wide, has 1/8 inch long turret Terminals, 5 oz operating force, SPDT-DB, Form Z, and silver/gold high current contacts.
MPN: 5930-01-220-6193
Manufacturer: Otto
Rugged military grade miniature toggle Switch. Lightweight, miniature and ruggedized snap-action. Positive detent action for safe Switching operation. Sealed. No tease contact operation. 1 pole. On-none-on. 15/32'' bushing.
MPN: 5930-01-222-3158
Manufacturer: Otto
Rugged military grade miniature toggle Switch. Lightweight, miniature and ruggedized snap-action. Positive detent action for safe Switching operation. Sealed. No tease contact operation. 1 pole. On (momentary)- off - on (momentary). 15/32'' bushing.
MPN: 5930-01-226-0467
Manufacturer: Otto
Limit Switch, SPST, 7 amps (resistive) @ 28VDC/115VAC, Qualified per MIL-PRF-8805/4, stainless steel housing and plunger.
MPN: 5930-01-258-9663
Manufacturer: Otto
Pushbutton Switch - special case, .38 inch red button, 10A resistive at 28VDC or 115VAC, watertight per MIL-PRF-8805, Design 3, Temperature range -55 degrees C to +65 degrees C.
MPN: 5930-01-258-9669
Manufacturer: Otto
Rugged Snap Action Pushbutton Switch. Normally Open. Dust tight. Internal silicon rubber boot seals out contaminants. Black.160 button. 5 amps@28vdc.Solder Terminals.
MPN: 5930-01-276-2975
Manufacturer: Otto
Sealed push button Switch, normally open, 2.5 lbs operating force, normally open , positive tactile feedback, red button, solder Terminals. Makes and breaks every time! Less than 25 milliohms contact resistance because the OTTO design features inherent rocking action that breaks welds and wipes contacts clean. The P3-71111 is the commercial version of the P1 Pushbutton Switch, offering vastly improved life under extreme conditions found in some industrial environments. The pushbutton is sealed by a silicone boot operating on our patented rolling sleeve, providing longer life and smoother operation over a wide temperature range.
MPN: 5930-01-291-4885
Manufacturer: Otto
Special Rugged Snap Action Mini Pushbutton Switch. 2 circuit. Dust & moisture tight. Black .375 button. Silicon rubber seal gives long life and smooth operation. See PDF Drawing here.
MPN: 5930-01-295-8496
Manufacturer: Otto
Switch, Locking toggle. (3 POLE - 3 POS.). Basic Switch elements per MIL-PRF-8805/4 except with integral lever. Electrical life: 25,000 cycles. See drawing for more information.
MPN: 5930-01-297-0821
Manufacturer: Otto
Precision mil spec trigger Switch. 7 amps @ 28 VDC. 2 pole Black housing, red button. Mil qualified to M8805/111-01.
MPN: 5930-01-298-2214
Manufacturer: Otto
Push button Switch. Sub miniature. Long life. 5 amp sealed momentary snap action Mil Spec with positive tactile feedback. Same as part # P7-331222.
MPN: 5930-01-303-4812
Manufacturer: Otto
Push button Switch. Sub miniature. Long life. 5 amp sealed momentary snap action Mil Spec with positive tactile feedback. Same as part # P7-531122.
MPN: 5930-01-304-4353
Manufacturer: Otto
Pushbutton Switch. This is a sealed, SPDT, 2 Circuit, black button, shrouded black anodized case with drain hole.
MPN: 5930-01-320-7829
Manufacturer: Otto
This item has been added to your cart!