Electrical
Switches And Guards

4 way toggle trim Switch. The T4 Mini Trim is a single pole, 4 throw, center off, momentary contact (self return to center off). Numerous button styles are available on both the Commercial and Military grade Switch versions. Mini Trims are typically press fit into control Grip or Panel mounted using versions with an 11/16 threaded case. Mini Trims are also available with multiple sealing levels to fit all applications. Please see attached PDF for the T4-0043, M9419/2-002 version.

MPN: 5930-01-560-3157

Manufacturer: Otto

Miniature lever locking toggle Switch, very similar to 7103K12ZQE, SPDT, on-off-on circuitry, rated at 6 amps, 125VAC, solder Terminals, -40 threaded bushing with neck Hardware included. Specially priced for this lot!

MPN: 5930-01-561-8940

Manufacturer: ElectroSwitch

Rugged, watertight pushbutton Switch per MIL-STD-810, 15/32 thread. SPST, Normally open, double break. Red Button, black anodized case.

MPN: 5930-01-562-4166

Manufacturer: Otto

Electrical windshield wiper Switch, 12V or 24V DC, for two motors, For use with motors with dynamic parking, including Robert Bosch and Sprague Devices motors, Sealed construction, including O-ring on the shaft, Black plastic Knob with metal insert and set screw, white imprint, Mounting stem 7/16" -28 thread, .45" (11.4mm) long, Diecast case 1 5/8" (41.3mm) diameter, 8 blade Terminals.

MPN: 5930-01-563-7314

Manufacturer: LittelFuse

Trigger Switch, DPDT, FEDERAL STOCK NUMBER STK 5930-01-565-3426 2 detents. PDF attached-photo shown is similar, not exact. Similar to OTTO Controls U2-016 but with gray button.

MPN: 5930-01-565-3426

Manufacturer: Otto

Special pushbutton Switch with knurled shroud. P1 series are sealed, Mil Grade MIL-PRF-8805/3 Momentary Action, Snap Action, Double Break. See attached PDF.

MPN: 5930-01-567-4286

Manufacturer: Otto

Rugged military grade miniature toggle Switch. Lightweight, miniature and ruggedized snap-action. Positive detent action for safe Switching operation. Sealed. No tease contact operation.2 pole. On-off-on. 15/32'' bushing.

MPN: 5930-01-568-6822

Manufacturer: Otto

4-way military stadium press fit IP6 dusttight standard, gray.

MPN: 5930-01-568-6823

Manufacturer: Otto

Rugged duty Sealed limit Switch. Double Pole Double Throw. Roller Actuator. 72"" lead wire. MS27240-3 per MIL-S-8805/43.

MPN: 5930-01-573-9775

Manufacturer: Otto

Micro Switch TL series, Single Pole Single Throw (SPST), 2 Position (Off-On). Screw Terminals, Gold plated contacts, Locking lever.

MPN: 5930-01-575-6479

Manufacturer: Honeywell

Miniature toggle Switch, SPDT, On-none-On, Panel mount, solder Terminals with silver contacts. -40 threaded bushing. Rated 6 amps at 125VAC. Formerly JMT-123. Bat Handle Actuator, epoxy Terminal seal. Same as A123S1YZQE. Very similar/cross to 7101SYZQ, 7101SYZQE, MST-105D.

MPN: 5930-01-575-9511

Manufacturer: ElectroSwitch

Micro Switch TW Series Toggle Switch, DPST - 2 pole, 2 position (OFF-ON), IWTS Terminal, Standard Lever.

MPN: 5930-01-580-0551

Manufacturer: Honeywell

End bezel mounting system for Eaton NGR Switches

MPN: 5930-01-584-3508

Manufacturer: Eaton

NGR mounting system Panel center bezel for NGR Switch Switches

MPN: 5930-01-584-3509

Manufacturer: Eaton

Pushbutton Switch Momentary Action, Two Step DPDT-double break custom Pushbutton Switch -40 threads, black aluminum alloy case and button. Ring Panel seal, watertight Panel seal, all Hardware included.

MPN: 5930-01-584-7677

Manufacturer: Otto

Toggle Switch Guard. Spring loaded cover locks in up or down position. Red molded front cover. Black painted steel bracket. Military qualified but used on many commercial applications as well. Switch not included.

MPN: 5930-01-589-0974

Manufacturer: Otto

Sealed rugged dome momentary pushbutton Switch. 2 circuit. Dust tight IP64. Red flush dome button. Plastic housing. These can be shipped to you in 2-3 working days. They are built for you from stock components. "Disregard any out of stock notice, because we custom assemble them, however, they are NCNR." Assembly items that are in stock need at least 24 hours to process prior to shipping.

MPN: 5930-01-591-1323

Manufacturer: Otto

Micro Switch NT Series Toggle Switch, DPDT - 2 pole, 3 position (Momentary ON - OFF - Momentary ON), Screw Terminal, Standard Lever, UL/CSA L192, IP67/IP68 sealed, thermoplastic case. MICRO Switch NT Series toggle Switches meet the need for a rugged, cost-effective toggle Switch. Quality construction features include a seal between the toggle lever and bushing, and between the cover and case. These Switches can be used where Panels are subject to splashes, hosedowns, or outdoor environments. The "Easy-Start" threaded bushing enables quick alignment of mounting nut to decrease the chance of cross threading. The Panel stand-off with O-ring feature available on some listings, eliminates the need for behind-the-Panel Hardware, provides uniform Panel height, and provides a Panel to cover seal.

MPN: 5930-01-595-2309

Manufacturer: Honeywell

Micro Switch TL Series Sealed Toggle Switch, Single Pole Double Throw (SPDT) 3 Position (Momentary ON - OFF - Momentary ON), Screw Terminals, Standard Lever, Military Part Number MS24523-27. Ampere/Voltage Range (Resistive Load): 0.5 A at 250 Vdc; 0.75 A at 115 Vdc; 0.5 A to 15 A at 0.5 Vdc to 28 Vdc; 0.5 A to 10 A at 0.5 Vac to 277 Vac. UL/CSA L192: 10 A-125, 250, 277 Vac; 1/4 Hp-125 Vac; 1/2 Hp-250, 277 Vac; 3 A-125 Vac "L".

MPN: 5930-01-596-1291

Manufacturer: Honeywell

Sealed subminature special double break pushbutton Switch. Low level Switching, SPDT-DB, 2 circuit, waterproof to 1.4 PSI, press fit , black anodized case. See pdf for additional specs please.

MPN: 5930-01-604-0431

Manufacturer: Otto

4-way plus center pushbutton mini trim Switch, 5 pos, low level Switching, IP68S sealing, 1 pole, monetary center push.

MPN: 5930-01-604-1196

Manufacturer: Otto

4 way toggle Switch. DESIGN SYMBOL 3 seal, Low level, black button. See PDF here.

MPN: 5930-01-604-1234

Manufacturer: Otto

78 series DIP Switch, 4 position SPST, raised slide. Sealed base standard. Spring and ball contact.

MPN: 5930-01-609-7627

Manufacturer: Grayhill

Rugged military grade miniature toggle Switch. Lightweight, miniature and ruggedized snap-action. Positive detent action for safe Switching operation. Sealed. No tease contact operation.1 pole. On-off-on. 15/32'' bushing. Allow 6-7 week leadtimes for quantities greater than what we show here.

MPN: 5930-01-614-5739

Manufacturer: Otto

One Piece Sensor, Harsh Environment 3-wire dc, Cylindrical, Stainless steel, Stainless steel, NO Current Sink, 18 Vdc to 32 Vdc, FW Series.

MPN: 5930-01-615-5458

Manufacturer: Honeywell

Sealed rocker Switch, DPST, Momentary On - Off - Mometary On, rocker Switch rated at 20A @ 12V, .250 quick connect tab Terminals, standard black bracket, black rocker, no Lamp or Lens. The L-Series snap-in rocker Switches offer countless unique options including choices for ratings, colors, illuminations and laser etched legends. These single or double pole Switches feature a broad choice of Actuator styles, colors, and Lenses. Neatly proportioned, the L-Series rocker Switch fits into industry standard mounting holes of 1/734' x .867 & and 44.0mm x 22.0mm. Twelve Terminals offer an extensive range of Switch and Lamp circuit options, including LED or incandescent illumination. An optional Plug-in Terminal Connector enables pre-wiring of wire harness.The L-Series Switches, with sealed front Panel components, are IP67 certified, and able to withstand temperatures from -40 C to +85 C. These Switches are vibration, shock, thermoshock, moisture and salt spray resistant.

MPN: 5930-01-617-8265

Manufacturer: Carling Technologies

Subminiature, rugged, sealed pushbutton mil grade Switch. 2 circuit, low level Switching. Black body and button. Solder Terminals.

MPN: 5930-01-617-9462

Manufacturer: Otto

Marine approved block type compact Temperature Switch; Pg11; 2m capilary length; 70-120 C.

MPN: 5930-01-621-5100

Manufacturer: Danfoss

Micro Switch NT Series Toggle Switch, SPDT - 1 pole, 2 position (ON-ON), Quick Connect Terminal, Standard Lever. Completely sealed Switching chamber; NEMA 3, 3R, 4, and 13; UL recognized, File E12252, Vol. 1, Section 44; CSA certified, File LR4442; CE approved. Capable of withstanding a temperature of 160 degrees F continuously at full rated load. MICRO Switch NT Series toggle Switches meet the need for a rugged, cost-effective toggle Switch. Quality construction features include a seal between the toggle lever and bushing, and between the cover and case. These Switches can be used where Panels are subject to splashes, hosedowns, or outdoor environments. The "Easy-Start" threaded bushing enables quick alignment of mounting nut to decrease the chance of cross threading. The Panel stand-off with O-ring feature available on some listings, eliminates the need for behind-the-Panel Hardware, provides uniform Panel height, and provides a Panel to cover seal.

MPN: 5930-01-625-5833

Manufacturer: Honeywell

Custom momentary action 2 Step pushbutton Switch, DPDT, momentary action, red button, black base, sealed to IP64.

MPN: 5930-01-626-8045

Manufacturer: Otto