Electrical
Switches And Guards

Micro Switch NT Series Toggle Switch, DPDT - 2 pole, 2 position (Momentary ON - ON, Screw Terminal, Standard Lever, UL/CSA L192, IP67/IP68 sealed, thermoplastic case. MICRO Switch NT Series toggle Switches meet the need for a rugged, cost-effective toggle Switch. Quality construction features include a seal between the toggle lever and bushing, and between the cover and case. These Switches can be used where Panels are subject to splashes, hosedowns, or outdoor environments. The "Easy-Start" threaded bushing enables quick alignment of mounting nut to decrease the chance of cross threading. The Panel stand-off with O-ring feature available on some listings, eliminates the need for behind-the-Panel Hardware, provides uniform Panel height, and provides a Panel to cover seal.

MPN: 5930-01-482-4492

Manufacturer: Honeywell

Micro Switch TW Series Toggle Switch, DPDT - 2 pole, 2 position (Momentary ON - ON), IWTS termination, Locking Lever (F) - Locked in extreme position (opposite keyway). Ampere/Voltage Range (Resistive Load): 0.1 A to 5.0 A at 0.5 Vac to 115 Vac; 0.1 A to 5.0 A at 0.5 Vdc to 28 Vdc. UL/CSA L117: 5 A at 125 Vac

MPN: 5930-01-485-5102

Manufacturer: Honeywell

Micro Switch TW Series Toggle Switch, DPDT - 2 pole, 2 position (ON-ON), IWTS Terminal, fine silver contacts, Locking Lever (D) - Locked out of Center position. Ampere/Voltage Range (Resistive Load): 0.1 A to 5.0 A at 0.5 Vac to 115 Vac; 0.1 A to 5.0 A at 0.5 Vdc to 28 Vdc. UL/CSA L117: 5 A at 125 Vac MICRO Switch TW Series toggle Switches are military qualified to MIL-83731 specifications for sealed and unsealed toggle Switches. Quality construction features include an available bonded seal between the toggle lever and bushing for those applications where a sealing-related failure cannot be tolerated. The durable design of the TW Series toggle is well-suited for many military, aerospace and other demanding applications where space behind the Panel is limited. TW toggles feature a miniature military-grade design with environmental sealing capabilities and can be configured with a large selection of circuitries, electrical terminations, lever and bushing designs, and contact material options to satisfy a diverse range of applications.

MPN: 5930-01-487-8802

Manufacturer: Honeywell

Micro Switch TW Series Toggle Switch, 1 pole, 2 position, locking lever with 15/32 bushing.Quality construction features include an available bonded seal between the toggle lever and bushing for those applications where a sealing-related failure cannot be tolerated. The durable design of the TW Series toggle is well-suited for many military, aerospace and other demanding applications where space behind the Panel is limited. TW toggles feature a miniature military-grade design with environmental sealing capabilities and can be configured with a large selection of circuitries, electrical terminations, lever and bushing designs, and contact material options to satisfy a diverse range of applications.

MPN: 5930-01-490-3849

Manufacturer: Honeywell

Micro Switch TL Series Toggle Switch, SPDT - 1 pole, 3 position (Momentary ON - OFF - ON), Screw Terminal, Tab Lever.

MPN: 5930-01-496-7296

Manufacturer: Honeywell

Micro Switch HM series Switch Assembly - 2x SPDT Switches, 4 amps (resistive) at 28VDC.

MPN: 5930-01-501-1694

Manufacturer: Honeywell

Limit Switch

MPN: 5930-01-503-3445

Manufacturer: Otto

Toggle Switch, MIL-DTL-3950 & MS24523-30 Approved, 15A @ 28 VDC & 115 VAC 60 or 400 Hertz Resistive Load, S.P.S.T. OFF-NONE-Momentary ON, Environmentally Sealed, Screw Terminals. Sealed to IP68.

MPN: 5930-01-508-7667

Manufacturer: Safran

The P7 series subminiature Switches embrace today's technology requirements by allowing for a large number of Switches to fit within a faceplate or a small Panel space.The long life snap-action design offers low contact resistance (25 milliohms max initial) and is protected from the environment by a silicone rubber boot, operating on a rolling sleeve principle that gives long sealed life and smooth operation. The P7 series is designed to meet the requirements of MIL-PRF-8805 including low level Switching (10mA @ 30mV) with power Switching up to 5 amps at 28VDC as well.

MPN: 5930-01-509-2251

Manufacturer: Otto

Visi-rocker Switch, single pole, Off-None-On, .250 quick connect tabs Terminals, black gloss visi-rocker (2 colors), with black matte bezel, hot stamp, visi-red rocker The R-Series Curvette single pole rocker Switches are aesthetically pleasing miniature snap-in Switches. Due to the patented mounting ear design, they are compatible with a wide range of standard Panel cutouts. Options include a range of momentary and maintained single or double throw circuits, various terminations, and legend options, as well as a variety of rocker colors and styles, including our unique curved two-color molded Visi-Rocker for low cost "ON" indication.

MPN: 5930-01-513-1923

Manufacturer: Carling Technologies

Micro Switch 200FW series, Shielded 3-wire DC Sinking (NPN), N.O. proximity Sensor, 0.625 in cylindrical housing , Connector version mates with MS3116-8-4S. Nominal sensing distance of 2,4 mm to 11,4 mm [.09 in to .45 in] with 101MG7 as the magnetic target.

MPN: 5930-01-515-9318

Manufacturer: Honeywell

Micro Switch NT Series Toggle Switch, SPST - 1 pole, 2 position (Momentary ON - OFF), Quick Connect Terminal, Standard Lever. Completely sealed Switching chamber; NEMA 3, 3R, 4, and 13; UL recognized, File E12252, Vol. 1, Section 44; CSA certified, File LR4442; CE approved. Capable of withstanding a temperature of 160 degrees F continuously at full rated load. MICRO Switch NT Series toggle Switches meet the need for a rugged, cost-effective toggle Switch. Quality construction features include a seal between the toggle lever and bushing, and between the cover and case. These Switches can be used where Panels are subject to splashes, hosedowns, or outdoor environments. The "Easy-Start" threaded bushing enables quick alignment of mounting nut to decrease the chance of cross threading. The Panel stand-off with O-ring feature available on some listings, eliminates the need for behind-the-Panel Hardware, provides uniform Panel height, and provides a Panel to cover seal.

MPN: 5930-01-517-0360

Manufacturer: Honeywell

Momentary action, military spec (M8805/110-1561), sealed sub-subminiature push button snap-action Switch. The P7 series incorporates OTTO's patented double break design in a significantly smaller package. These subminiature Switches embrace today's technology requirements by allowing for a large number of Switches to fit within a faceplate. The long life snap-action design is protected from the environment by a silicon rubber boot. This version offers a short body, is watertight, has solder Terminals, has 2 circuit low level Switching, a black bezel and red button.

MPN: 5930-01-519-7052

Manufacturer: Otto

Toggle, MIL-DTL-3950 & MS24524-28 Approved. 15 @ 28 VDC or 15A 115VAC 60 or 400 Hertz Resistive Load, D.P,S.T. None-OFF-Momentary ON, Environmentally Sealed, Screw Terminals. Allow 10 week leadtime for delivery. Sealed to IP68.

MPN: 5930-01-520-4190

Manufacturer: Safran

Pushbutton Switch, style B, sealed military grade pushbutton Switch. Screw Terminals, normal open circuitry, 2.5LBS momentary action, black button.

MPN: 5930-01-523-1919

Manufacturer: Otto

Micro Switch Environmentally Sealed Basic Switch, SPDT, snap action, corrosion resistant steel plunger, gold contacts, 1 amp (resistive) at 30VDC.

MPN: 5930-01-524-5473

Manufacturer: Honeywell

Micro Switch SX Series Subminiature Basic Switch, Single Pole Double Throw (SPDT), 28 Vdc, 1 A, Pin Plunger Actuator, Solder Termination.

MPN: 5930-01-527-5676

Manufacturer: Honeywell

SPDT ON-NONE-ON mini toggle Switch with .41 bat toggle Handle. Splash proof with bushing seal. Gold/nickel/silver Terminals. Specially priced for this lot!

MPN: 5930-01-529-3109

Manufacturer: ElectroSwitch

Momentary Action, Two Step, Custom Pushbutton Switch. Turret Terminals, black bezel, and red button.

MPN: 5930-01-531-5318

Manufacturer: Otto

AML24 Series Rocker Switch, 4PDT, 3 position, Gold Contacts, 0.025 in x 0.025 in (Printed Circuit or Push-on), Non-Lighted, Rectangle, Snap-in Panel, button sold separately

MPN: 5930-01-533-5294

Manufacturer: Honeywell

Micro Switch BZ Series Premium Large Basic Switch, Single Pole Double Throw Circuitry, 15 A at 125 Vac, High Overtravel Cross Roller Plunger Actuator, 2,5 N - 3,61 N [9 oz - 13 oz] Operating Force, Silver Contacts, Screw Termination, CE, CSA, DEMKO,.

MPN: 5930-01-533-7297

Manufacturer: Honeywell

Clear Push button Switch Boot, 3/8-32 NEF-2B thread, IP66/68 rated. Also works on some Circuit Breakers. See attached spec sheet and PDF.

MPN: 5930-01-539-0558

Manufacturer: APM Hexseal

Rocker Switch, universal weather resistant, SPDT, On-Off-On Rated at 25A at 12V DC, 15A at 24V DC, sealed to IP66 for water resistance (high Pressure wash), three brass blade Terminals

MPN: 5930-01-541-0861

Manufacturer: LittelFuse

Sealed pushbutton Switch. Momentary action, snap action with positive tactile feel. Normally open. Solder Terminals. Black body, red button. Rated at 10 amps.

MPN: 5930-01-542-1219

Manufacturer: Otto

Rugged toggle Switch. Non teasable. Lightweight, miniature and ruggedized snap-action. Shorter behind Panel depth. Locked out of center position. See spec sheet.Single pole. Off-None-On. 15/32 bushing. Gold contacts.

MPN: 5930-01-542-2852

Manufacturer: Otto

Transducer with pushbutton. The Otto Transducer takes a force input of up to 3 lbs. and converts it into a linear voltage output on an X and Y axis. Button is made of black delrin. Case is black, anodized aluminum. 1,000,000 cycle mechanical / electrical life. Pull off force is 15 pounds, actuation force is 2.75 pounds. Please refer to specifications for additional information.

MPN: 5930-01-542-8759

Manufacturer: Otto

Micro Switch NT Series Toggle Switch, SPDT - 1 pole, 3 position (Momentary ON - OFF - ON), Screw Terminal, Standard Lever, UL/CSA L192, IP67/IP68 sealed, transportation grade toggle. MICRO Switch NT Series toggle Switches meet the need for a rugged, cost-effective toggle Switch. Quality construction features include a seal between the toggle lever and bushing, and between the cover and case. These Switches can be used where Panels are subject to splashes, hosedowns, or outdoor environments. The ""Easy-Start"" threaded bushing enables quick alignment of mounting nut to decrease the chance of cross threading. The Panel stand-off with O-ring feature available on some listings, eliminates the need for behind-the-Panel Hardware, provides uniform Panel height, and provides a Panel to cover seal.

MPN: 5930-01-544-2169

Manufacturer: Honeywell

Plunger Switch w/ wheel tip, SPDT 7A, high shock & vibration resistance, fully sealed.

MPN: 5930-01-546-4984

Manufacturer: Kissling

Sealed pushbutton Switch, 2 circuit, watertight seal, momentary snap action, black.

MPN: 5930-01-548-7479

Manufacturer: Otto

Dash mount style, black color. Manufactured by GoLight. Part number 2049-D

MPN: 5930-01-557-0592

Manufacturer: GoLight