Electrical
Switches And Guards

Rugged Rotary Switch

MPN: 5930-01-426-4039

Manufacturer: Grayhill

Micro Switch TP Series Rocker Switch, SPDT - 1 pole, 3 position (Momentary ON - OFF - ON), Screw Terminal, Above Panel Mounting.Ampere/Voltage Range (Resistive Load): 0.5 A to 15 A at 0.5 Vdc to 28 Vdc|0.5 A to 10 A at 0.5 Vac to 7 Vac|0.75 A at 115 Vdc|0.5 A at 250 Vdc. LED/Lamp/Neon Voltage L192: 10 A-125, 250, 277 Vac; 1/4 Hp-125 Vac; 1/2 Hp-250, 277 Vac; 3 A-125 Vac "L".

MPN: 5930-01-426-4318

Manufacturer: Honeywell

P4 - Momentary Action, Two Step, Custom Pushbutton Turret Terminals, DPDT 6 Terminals, momentary Switching action, red button. Allow 8 weeks delivery if no stock is shown.

MPN: 5930-01-426-8984

Manufacturer: Otto

Special Rugged Snap Action Mini Pushbutton Switch . Two circuit. Dust & moisture tight. Red .375 button. Silicon rubber seal gives long life and smooth operation. See PDF drawing here.

MPN: 5930-01-433-9510

Manufacturer: Otto

Momentary sealed, snap action, double break pushbutton Switch. The P1 offers a mechanical life that is well beyond the 50,000 cycles required by MIL-PRF-8805. The double break Switching mechanism has an incredibly fast transfer time, reducing arcing and increasing contact life. The inherent wiping action breaks welds and scrubs the contacts clean on every actuation. The P1 Switch offers vastly improved life under extreme conditions found in most military environments. This version is a special Single pole, normally open double break, .50 tall gray button, black alum case, dust tight design 2. See PDF.

MPN: 5930-01-441-5123

Manufacturer: Otto

Pushbutton Switch subminiature. P7-300014 is a sealed, Mil Grade MIL-PRF-8805/110, Momentary Action SPDT- DB (double break) pushbutton swich, black anodized, D-flat on case, . 312 diameter black nylon button. DESIGN 2 MIL Sealed. Design 2 sealed to IP68S & MIL-PRF-8805. NSN 5930-01-445-7947.

MPN: 5930-01-445-7947

Manufacturer: Otto

Micro Switch AT Series Toggle Switch, 4PDT - 4 pole, 3 position, H58 Terminal, Standard Lever, FAA-PMA approved, contains 24K solid gold contacts.

MPN: 5930-01-445-8533

Manufacturer: Honeywell

Micro Switch AT Series Toggle Switch, 4PDT - 4 pole, 3 position, H58 Terminal, Locking Lever (K) - Locked in center and extreme position (opposite keyway), FAA-PMA approved, contains 24K solid gold contacts.

MPN: 5930-01-445-8535

Manufacturer: Honeywell

Rugged military grade miniature toggle Switch. Lightweight, miniature and ruggedized snap-action. Positive detent action for safe Switching operation. Sealed. No tease contact operation. 2 pole. On (momentary)-none-on. 15/32'' bushing.

MPN: 5930-01-450-1819

Manufacturer: Otto

Sealed Military Spec Pushbutton Switch. 10A, normally closed, SPST, Screw Terminals, push pull maintained, Black Button. MS25089-2C-1. Hardware included. Same as Otto P1-32232

MPN: 5930-01-450-6726

Manufacturer: Otto

Micro Switch NT Series Toggle Switch, SPDT - 1 pole, 3 position (Momentary ON - OFF - ON), Quick Connect Terminal, Standard Lever. Completely sealed Switching chamber; NEMA 3, 3R, 4, and 13; UL recognized, File E12252, Vol. 1, Section 44; CSA certified, File LR4442; CE approved. Capable of withstanding a temperature of 160 degrees F continuously at full rated load. MICRO Switch NT Series toggle Switches meet the need for a rugged, cost-effective toggle Switch. Quality construction features include a seal between the toggle lever and bushing, and between the cover and case. These Switches can be used where Panels are subject to splashes, hosedowns, or outdoor environments. The "Easy-Start" threaded bushing enables quick alignment of mounting nut to decrease the chance of cross threading. The Panel stand-off with O-ring feature available on some listings, eliminates the need for behind-the-Panel Hardware, provides uniform Panel height, and provides a Panel to cover seal.

MPN: 5930-01-456-9303

Manufacturer: Honeywell

Hermetically sealed limit Switch. 1A

MPN: 5930-01-464-1473

Manufacturer: Honeywell

4 way toggle trim Switch. Single pole, 4 throw, center off, momentary contact. Self return to center off. 1 amp inductive at 28 VDC, 100,000 cycles. Please refer to specifications for additional information.

MPN: 5930-01-464-4642

Manufacturer: Otto

Micro Switch NT Series Toggle Switch, DPDT - 2 pole, 3 position (ON-OFF-ON), Screw Terminal, Standard Lever, Thermoplastic case, UL/CSA L191, IP67/IP68 sealed. MICRO Switch NT Series toggle Switches meet the need for a rugged, cost-effective toggle Switch. Quality construction features include a seal between the toggle lever and bushing, and between the cover and case. These Switches can be used where Panels are subject to splashes, hosedowns, or outdoor environments. The "Easy-Start" threaded bushing enables quick alignment of mounting nut to decrease the chance of cross threading. The Panel stand-off with O-ring feature available on some listings, eliminates the need for behind-the-Panel Hardware, provides uniform Panel height, and provides a Panel to cover seal.

MPN: 5930-01-467-2384

Manufacturer: Honeywell

Micro Switch NT Series Toggle Switch, DPDT - 2 pole, 3 position (Momentary ON - OFF - Momentary ON), Quick Connect Terminal, Standard Lever. Completely sealed Switching chamber; NEMA 3, 3R, 4, and 13; UL recognized, File E12252, Vol. 1, Section 44; CSA certified, File LR4442; CE approved. Capable of withstanding a temperature of 160 degrees F continuously at full rated load. MICRO Switch NT Series toggle Switches meet the need for a rugged, cost-effective toggle Switch. Quality construction features include a seal between the toggle lever and bushing, and between the cover and case. These Switches can be used where Panels are subject to splashes, hosedowns, or outdoor environments. The "Easy-Start" threaded bushing enables quick alignment of mounting nut to decrease the chance of cross threading. The Panel stand-off with O-ring feature available on some listings, eliminates the need for behind-the-Panel Hardware, provides uniform Panel height, and provides a Panel to cover seal.

MPN: 5930-01-467-2463

Manufacturer: Honeywell

Limit Switch. P6-20018 except molded rubber exit header. It is 4PDT, stainless steel housing, 22AWG wire leads.

MPN: 5930-01-468-5473

Manufacturer: Otto

Enclosed Switch, SPDT (2), Top Plunger, 1 amp, 28 VDC, corrosion resistant steel Enclosure, Sealed per MIL-S-8805 symbol 4

MPN: 5930-01-471-3248

Manufacturer: Honeywell

XE Series Environmentally Sealed Basic Switch, Single Pole Double Throw Circuitry, 1 A at 28 Vdc, Pin Plunger Actuator, Leadwire Termination, Military Part Number MS27994-5.

MPN: 5930-01-479-5308

Manufacturer: Honeywell

Micro Switch NT Series Toggle Switch, DPDT - 2 pole, 2 position (Momentary ON - ON, Screw Terminal, Standard Lever, UL/CSA L192, IP67/IP68 sealed, thermoplastic case. MICRO Switch NT Series toggle Switches meet the need for a rugged, cost-effective toggle Switch. Quality construction features include a seal between the toggle lever and bushing, and between the cover and case. These Switches can be used where Panels are subject to splashes, hosedowns, or outdoor environments. The "Easy-Start" threaded bushing enables quick alignment of mounting nut to decrease the chance of cross threading. The Panel stand-off with O-ring feature available on some listings, eliminates the need for behind-the-Panel Hardware, provides uniform Panel height, and provides a Panel to cover seal.

MPN: 5930-01-482-4492

Manufacturer: Honeywell

Micro Switch TW Series Toggle Switch, DPDT - 2 pole, 2 position (Momentary ON - ON), IWTS termination, Locking Lever (F) - Locked in extreme position (opposite keyway). Ampere/Voltage Range (Resistive Load): 0.1 A to 5.0 A at 0.5 Vac to 115 Vac; 0.1 A to 5.0 A at 0.5 Vdc to 28 Vdc. UL/CSA L117: 5 A at 125 Vac

MPN: 5930-01-485-5102

Manufacturer: Honeywell

Micro Switch TW Series Toggle Switch, DPDT - 2 pole, 2 position (ON-ON), IWTS Terminal, fine silver contacts, Locking Lever (D) - Locked out of Center position. Ampere/Voltage Range (Resistive Load): 0.1 A to 5.0 A at 0.5 Vac to 115 Vac; 0.1 A to 5.0 A at 0.5 Vdc to 28 Vdc. UL/CSA L117: 5 A at 125 Vac MICRO Switch TW Series toggle Switches are military qualified to MIL-83731 specifications for sealed and unsealed toggle Switches. Quality construction features include an available bonded seal between the toggle lever and bushing for those applications where a sealing-related failure cannot be tolerated. The durable design of the TW Series toggle is well-suited for many military, aerospace and other demanding applications where space behind the Panel is limited. TW toggles feature a miniature military-grade design with environmental sealing capabilities and can be configured with a large selection of circuitries, electrical terminations, lever and bushing designs, and contact material options to satisfy a diverse range of applications.

MPN: 5930-01-487-8802

Manufacturer: Honeywell

Micro Switch TW Series Toggle Switch, 1 pole, 2 position, locking lever with 15/32 bushing.Quality construction features include an available bonded seal between the toggle lever and bushing for those applications where a sealing-related failure cannot be tolerated. The durable design of the TW Series toggle is well-suited for many military, aerospace and other demanding applications where space behind the Panel is limited. TW toggles feature a miniature military-grade design with environmental sealing capabilities and can be configured with a large selection of circuitries, electrical terminations, lever and bushing designs, and contact material options to satisfy a diverse range of applications.

MPN: 5930-01-490-3849

Manufacturer: Honeywell

Micro Switch TL Series Toggle Switch, SPDT - 1 pole, 3 position (Momentary ON - OFF - ON), Screw Terminal, Tab Lever.

MPN: 5930-01-496-7296

Manufacturer: Honeywell

Micro Switch HM series Switch Assembly - 2x SPDT Switches, 4 amps (resistive) at 28VDC.

MPN: 5930-01-501-1694

Manufacturer: Honeywell

Limit Switch

MPN: 5930-01-503-3445

Manufacturer: Otto

Toggle Switch, MIL-DTL-3950 & MS24523-30 Approved, 15A @ 28 VDC & 115 VAC 60 or 400 Hertz Resistive Load, S.P.S.T. OFF-NONE-Momentary ON, Environmentally Sealed, Screw Terminals. Sealed to IP68.

MPN: 5930-01-508-7667

Manufacturer: Safran

The P7 series subminiature Switches embrace today's technology requirements by allowing for a large number of Switches to fit within a faceplate or a small Panel space.The long life snap-action design offers low contact resistance (25 milliohms max initial) and is protected from the environment by a silicone rubber boot, operating on a rolling sleeve principle that gives long sealed life and smooth operation. The P7 series is designed to meet the requirements of MIL-PRF-8805 including low level Switching (10mA @ 30mV) with power Switching up to 5 amps at 28VDC as well.

MPN: 5930-01-509-2251

Manufacturer: Otto

Visi-rocker Switch, single pole, Off-None-On, .250 quick connect tabs Terminals, black gloss visi-rocker (2 colors), with black matte bezel, hot stamp, visi-red rocker The R-Series Curvette single pole rocker Switches are aesthetically pleasing miniature snap-in Switches. Due to the patented mounting ear design, they are compatible with a wide range of standard Panel cutouts. Options include a range of momentary and maintained single or double throw circuits, various terminations, and legend options, as well as a variety of rocker colors and styles, including our unique curved two-color molded Visi-Rocker for low cost "ON" indication.

MPN: 5930-01-513-1923

Manufacturer: Carling Technologies

Micro Switch 200FW series, Shielded 3-wire DC Sinking (NPN), N.O. proximity Sensor, 0.625 in cylindrical housing , Connector version mates with MS3116-8-4S. Nominal sensing distance of 2,4 mm to 11,4 mm [.09 in to .45 in] with 101MG7 as the magnetic target.

MPN: 5930-01-515-9318

Manufacturer: Honeywell

Micro Switch NT Series Toggle Switch, SPST - 1 pole, 2 position (Momentary ON - OFF), Quick Connect Terminal, Standard Lever. Completely sealed Switching chamber; NEMA 3, 3R, 4, and 13; UL recognized, File E12252, Vol. 1, Section 44; CSA certified, File LR4442; CE approved. Capable of withstanding a temperature of 160 degrees F continuously at full rated load. MICRO Switch NT Series toggle Switches meet the need for a rugged, cost-effective toggle Switch. Quality construction features include a seal between the toggle lever and bushing, and between the cover and case. These Switches can be used where Panels are subject to splashes, hosedowns, or outdoor environments. The "Easy-Start" threaded bushing enables quick alignment of mounting nut to decrease the chance of cross threading. The Panel stand-off with O-ring feature available on some listings, eliminates the need for behind-the-Panel Hardware, provides uniform Panel height, and provides a Panel to cover seal.

MPN: 5930-01-517-0360

Manufacturer: Honeywell