78 series DIP Switch, 4 position SPST, raised slide. Sealed base standard. Spring and ball contact.
Manufacturer: GrayhillSwitch roller lever Assembly, Actuator Switch.
Manufacturer: HoneywellAuxiliary Actuator for Environment-sealed basic Switch, roller lever
Manufacturer: HoneywellAuxiliary Switch Actuator, Corrosion resistant steel leaf lever
Manufacturer: HoneywellMicro Switch Straight lever Auxiliary Actuator for SX series Switches
Manufacturer: HoneywellActuator for use with many micro Switches-refer to pdf.
Manufacturer: HoneywellRotary Switch, 3 position, double pole, Maintained-Maintained-Maintained circuitry, standard rating without Terminal barriers, with Connector keying pin, black plactic Knob, IP68S sealed, snap-in Panel mounting. No LED light source.
Manufacturer: OttoToggle Switch Guard. Spring loaded cover locks in up or down position. Red molded front cover. Black painted steel bracket. Military qualified but used on many commercial applications as well. Switch not included.
Manufacturer: Otto5000 series Pressure Switch with standard Terminals, Factory set at 60 PSI, Normally Open (N.O), single circuit - 2 Terminals.
Manufacturer: HoneywellTransducer with pushbutton. The Otto Transducer takes a force input of up to 3 lbs. and converts it into a linear voltage output on an X and Y axis. Button is made of black delrin. Case is black, anodized aluminum. 1,000,000 cycle mechanical / electrical life. Pull off force is 15 pounds, actuation force is 2.75 pounds. Please refer to specifications for additional information.
Manufacturer: OttoAviation grade Proximity Sensor, 100FW series, Shielded 3-wire DC Sinking (NPN), N.O. proximity Sensor, 0.625 in cylindrical housing , 20 ga, MIL-W-16878/4 wire. Nominal sensing distance of 2,41 mm 0,51 mm [.09 in .02 in ].
Manufacturer: HoneywellBlack Rugged Sealed 16 amp Rocker Switch, Momentary on -none-off SPST, No Light, No Legend.
Manufacturer: OttoUnshielded 3-wire DC Sinking (NPN), N.O. proximity Sensor, 0.625 in cylindrical housing , 20 ga, MIL-W-16878/4 wire. Nominal sensing distance of 5,84 mm 0,76 mm [.23 in .03 in ].
Manufacturer: HoneywellPush button Switch. Sub miniature. Long life. 5 amp sealed momentary snap action Mil Spec with positive tactile feedback. Same as part # P7-331222.
Manufacturer: OttoPush button Switch. Sub miniature. Long life. 5 amp sealed momentary snap action Mil Spec with positive tactile feedback. Same as part # P7-531122.
Manufacturer: OttoMicro Switch TL Series Toggle Switch, SPST - 1 pole, 2 position (OFF-ON), IWTS (14-16 Gage) Terminal, Standard Lever, bushing 15/32 inch, Military Part Number MS27722-22. Amp/voltage range: 0.5 A to 15 A at 0.5 Vac to 277 Vac; 0.5 A to 20 A at 0.5 Vdc to 28 Vdc; 0.5 A at 250 Vdc; 0.75 A at 115 Vdc. UL/CSA: L191: 15 A-125, 250, 277 Vac; 1/2 Hp-125 Vac; 1 Hp-250, 277 Vac; 5 A-120 Vac "L".
Manufacturer: HoneywellMicro Switch TL Series Toggle Switch, SPDT - 1 pole, 2 position (ON-ON), IWTS (16-20 Gage) Terminal, Locking Lever F- locked in extreme position (opposite keyway), Military Part Number MS27787-23F. Ampere/Voltage range (resistive load): 0.75 A at 115 Vdc; 0.5 A at 250 Vdc; 0.5 A to 7.5 A at 0.5 Vdc to 28 Vdc; 0.5 A to 6 A at 0.5 Vac to 230 Vac. UL/CSA: L191: 15 A-125, 250, 277 Vac; 1/2 Hp-125 Vac; 1 Hp-250, 277 Vac; 5 A-120 Vac "L"
Manufacturer: HoneywellMicro Switch is qualified to MIL-DTL-3950, specification for sealed toggle Switches. It is a 1 Pole 1 position, SPST toggle Switch with Internal wiring (IWTS) 16-20 awg. The robust design of the 101TL2-6 toggle is well-suited for many military, aerospace and other demanding applications. These applications include environments where the Panels are subjected to mechanical shock, vibration, and temperature extremes as well as environments with dust, splashing or hose-directed water.101TL2-6, MS27784-30 is UL recognized, CSA certified, and CE approved for global use. If no stock please allow 30 days for delivery.
Manufacturer: HoneywellControls mil grade pushbutton snap action Switch for low level Switching. Sealed with momentary action, normally open. 4 LBS momentary Switch action. Screw Terminals. Black body & button. Hardware is included. Mil qualified to MS25089-1CL. Same as Otto P1-34122.
Manufacturer:Micro Switch TL Series Toggle Switch, DPDT - 2 pole, 3 position (Momentary ON - OFF - ON), IWTS (16-20 Gage) Terminal, Standard Lever, Military Part Number MS27785-1. Ampere/Voltage Range (Resistive Load): 0.75 A at 115 Vdc; 0.5 A at 250 Vdc; 0.5 A to 15 A at 0.5 Vac to 277 Vac; 0.5 A to 20 A at 0.5 Vdc to 28 Vdc. UL/CSA: L191: 15 A-125, 250, 277 Vac; 1/2 Hp-125 Vac; 1 Hp-250, 277 Vac; 5 A-120 Vac d"L".
Manufacturer: HoneywellMicro Switch TL Series Toggle Switch, DPST - 2 pole, 2 position (OFF-ON), IWTS (16-20 Gage) Terminal, Standard Lever, Military Part Number MS27785-22. Ampere/Voltage Range (Resistive Load): 0.75 A at 115 Vdc; 0.5 A at 250 Vdc; 0.5 A to 6 A at 0.5 Vac to 230 Vac; 0.5 A to 7.5 A at 0.5 Vdc to 28 Vdc. UL/CSA: L191: 15 A-125, 250, 277 Vac; 1/2 Hp-125 Vac; 1 Hp-250, 277 Vac; 5 A-120 Vac "L"
Manufacturer: HoneywellSealed Military Spec Pushbutton Switch. 10A, normally open SPST, Screw Terminals, Momentary, Red Button. MS25089-1FR. Comes with mounting support nut. Same as Otto P1-62121
Manufacturer: OttoMicro Switch TL Series Toggle Switch, DPDT - 2 pole, 3 position (Momentary ON- OFF - Momentary ON), IWTS (16-20 Gage) Terminal, Locking Lever (E) - locked in center position, Military Part Number MS27788-27E. Ampere/Voltage Range (Resistive Load): 0.5 A at 250 Vdc; 0.5 A to 7.5 A at 0.5 Vdc to 28 Vdc; 0.5 A to 6 A at 0.5 Vac to 230 Vac; 0.75 A at 115 Vdc. UL/CSA L192: 10 A-125, 250, 277 Vac; 1/4 Hp-125 Vac; 1/2 Hp-250, 277 Vac; 3 A-125 Vac "L".
Manufacturer: HoneywellMicro Switch TL Series Toggle Switch, DPDT - 2 pole, 2 position (ON-ON), IWTS (16-20 Gage) Terminal, Special Design Lever - Lever with 0.064 diameter hole Ampere/Voltage Range (Resistive Load): 0.75 A at 115 Vdc; 0.5 A to 7.5 A at 0.5 Vdc to 28 Vdc; 0.5 A to 6 A at 0.5 Vac to 230 Vac; 0.5 A at 250 Vdc.
Manufacturer: HoneywellMicro Switch TW Series Toggle Switch, SPDT - 1 pole, 2 position (ON-ON), IWTS Terminal, Standard Lever. Ampere/Voltage Range (Resistive Load): 0.1 A to 5.0 A at 0.5 Vac to 115 Vac; 0.1 A to 5.0 A at 0.5 Vdc to 28 Vdc.
Manufacturer: HoneywellMicro Switch TW Series Toggle Switch, 1 pole, 2 position, locking lever with 15/32 bushing.Quality construction features include an available bonded seal between the toggle lever and bushing for those applications where a sealing-related failure cannot be tolerated. The durable design of the TW Series toggle is well-suited for many military, aerospace and other demanding applications where space behind the Panel is limited. TW toggles feature a miniature military-grade design with environmental sealing capabilities and can be configured with a large selection of circuitries, electrical terminations, lever and bushing designs, and contact material options to satisfy a diverse range of applications.
Manufacturer: HoneywellMicro Switch TW Series Toggle Switch, DPDT - 2 pole, 3 position (ON-OFF-ON), IWTS Terminal, Standard Lever. Ampere/Voltage Range (Resistive Load): 0.1 A to 5.0 A at 0.5 Vac to 115 Vac; 0.1 A to 5.0 A at 0.5 Vdc to 28 Vdc
Manufacturer: HoneywellSealed Military Spec Pushbutton Switch. 10A, normally closed, SPST, Screw Terminals, push pull maintained, Black Button. MS25089-2C-1. Hardware included. Same as Otto P1-32232
Manufacturer: OttoSealed Military Spec Pushbutton Switch. 10A, normally closed, SPST, Screw Terminals, push pull maintained, Black Button. MS25089-2C-1. Hardware included. Same as Otto P1-32232
Manufacturer: OttoMicro Switch TW Series Toggle Switch, DPST - 2 pole, 2 position (OFF-ON), IWTS Terminal, Standard Lever.
Manufacturer: HoneywellMicro Switch TW Series Toggle Switch, DPDT - 2 pole, 2 position (ON-ON), IWTS Terminal, fine silver contacts, Locking Lever (D) - Locked out of Center position. Ampere/Voltage Range (Resistive Load): 0.1 A to 5.0 A at 0.5 Vac to 115 Vac; 0.1 A to 5.0 A at 0.5 Vdc to 28 Vdc. UL/CSA L117: 5 A at 125 Vac MICRO Switch TW Series toggle Switches are military qualified to MIL-83731 specifications for sealed and unsealed toggle Switches. Quality construction features include an available bonded seal between the toggle lever and bushing for those applications where a sealing-related failure cannot be tolerated. The durable design of the TW Series toggle is well-suited for many military, aerospace and other demanding applications where space behind the Panel is limited. TW toggles feature a miniature military-grade design with environmental sealing capabilities and can be configured with a large selection of circuitries, electrical terminations, lever and bushing designs, and contact material options to satisfy a diverse range of applications.
Manufacturer: HoneywellMicro Switch TW Series Toggle Switch, DPDT - 2 pole, 2 position (Momentary ON - ON), IWTS termination, Locking Lever (F) - Locked in extreme position (opposite keyway). Ampere/Voltage Range (Resistive Load): 0.1 A to 5.0 A at 0.5 Vac to 115 Vac; 0.1 A to 5.0 A at 0.5 Vdc to 28 Vdc. UL/CSA L117: 5 A at 125 Vac
Manufacturer: HoneywellHM Series Hermetically Sealed Basic Switch, Single Pole Double Throw Circuitry, 3 A at 28 Vdc, Integral Lever Actuator, Solder Termination, Military Part Number MS27216-5.
Manufacturer: HoneywellSealed Military Spec Pushbutton Switch. 10A, 2 circuit, Screw Terminals, Momentary, White Button. Hardware included. Same as Otto P1-62629.
Manufacturer: OttoSealed Military Spec Pushbutton Switch. 10A, 2 circuit, Screw Terminals, Momentary, White Button. Hardware included. Same as Otto P1-62629.
Manufacturer: OttoMicro Switch Basic Switch - Special. SPDT circuitry, 5 amps (resistive) at 30VDC, NO/NC. Please see attached PDF drawing or 11SM430-T
Manufacturer: HoneywellCompact and robust differential CAS Pressure Switch with marine approvals for use in alarm and regulation systems in factories, diesel plants, Compressors, power stations and on board ships; 0-8 bar; .2-2.5 bar differential; seawater media safe; shock and vibration resistant. 060-313066 is a differential Pressure Switch. CAS155.
Manufacturer: DanfossMicro Switch TS Series Toggle Switch, SPST - 1 pole, 2 position (OFF-ON), Screw Terminal, Standard Lever.
Manufacturer: HoneywellSensitive switch for electrical system fuselage, model 12SE4-2. Features microswitch, ext power on S1.
Manufacturer: HoneywellMarine approved block type compact Temperature Switch; Pg11; 2m capilary length; 70-120 C.
Manufacturer: DanfossMicro Switch SX Series Subminiature Basic Switch, Single Pole Double Throw (SPDT), 125 Vac, 1 A, Pin Plunger Actuator, Solder Termination.
Manufacturer: HoneywellMicro Switch SX Series Subminiature Basic Switch, Single Pole Double Throw (SPDT), 28 Vdc, 1 A, Pin Plunger Actuator, Solder Termination.
Manufacturer: HoneywellMicro Switch TW Series Toggle Switch, DPDT - 2 pole, 3 position (ON-ON-ON), Solder Terminal, Standard Lever (A) - Locked in three positions, Military Part Number MS27753-34. Ampere/Voltage Range (Resistive Load): 0.1 A to 5.0 A at 0.5 Vdc to 28 Vdc; 0.1 A to 5.0 A at 0.5 Vac to 115 Vac. UL/CSA L117: 5 A at 125 Vac.
Manufacturer: HoneywellSubminiature basic switch, double break, snap-action, military grade, .20 inches wide, has 1/8 inch long turret Terminals, 5 oz operating force, SPDT-DB, Form Z, and silver/gold high current contacts.
Manufacturer: OttoSubminiature basic switch, double break, snap-action, military grade, .20 inches wide, has 1/8 inch long turret Terminals, 5 oz operating force, SPDT-DB, Form Z, and silver/gold high current contacts.
Manufacturer: OttoMicro Switch TW Series Toggle Switch, DPDT - 2 pole, 3 position (ON-OFF-ON), Solder Terminal, Locking Lever (A) - Locked in three positions, Military Part Number MS27721-21-1A. Ampere/Voltage Range (Resistive Load): 0.1 A to 5.0 A at 0.5 Vdc to 28 Vdc; 0.1 A to 5.0 A at 0.5 Vac to 115 Vac. UL/CSA L117: 5 A at 125 Vac.
Manufacturer: HoneywellThe P1-10052 is a sealed push button Switch with 4 LBS. momentary action. Snap action mil grade, double break Switch plus this version is a 2 circuit pushbutton Switch. Solder Terminals. Gray button (picture shows black but Switch button is gray).
Manufacturer: OttoSpecial Press-fit Switch, 10 amps (resistive)and 1050VRMS at 28VDC or 115VAC, gray thermoplastic button, SPDT, watertight per MIL-PRF-8805 design 3, temperature range -55 degress C to 85 degress C
Manufacturer: OttoTemperature range between -55 C to + 85 C. 28 VDC or 115 VAC, 10 Amp. Dust tight. Per MIL-S-8805, design 2. Nylon grey button. Black and anodized aluminum alloy case. 2 circuits. Please see drawing for more information.
Manufacturer: OttoSealed pushbutton Switch. Momentary action, snap action with positive tactile feel. Normally open. Solder Terminals. Black body, red button. Rated at 10 amps.
Manufacturer: OttoSealed rugged pushbutton Switch. Positive tactile feel. 10 amp. Solder Terminals. Normally open. Black button. Water tight.
Manufacturer: OttoMicro Switch TW Series Toggle Switch, DPDT - 2 pole, 3 position (Momentary ON - ON - Momentary ON), Solder Terminal, Locking Lever (N) - Locked out of extreme position (opposite keyway), Military Part Number MS27719-27-1. Ampere/Voltage Range (Resistive Load): 0.1 A to 5.0 A at 0.5 Vdc to 28 Vdc; 0.1 A to 5.0 A at 0.5 Vac to 115 Vac. UL/CSA L117: 5 A at 125 Vac.
Manufacturer: HoneywellSealed pushbutton Switch, 2 circuit, watertight seal, momentary snap action, black.
Manufacturer: OttoMicro Switch TW Series Toggle Switch, DPDT - 2 pole, 3 position (Momentary ON - ON - Momentary ON), Solder Terminal, Standard Lever. Ampere/Voltage Range (Resistive Load): 0.1 A to 5.0 A at 0.5 Vdc to 28 Vdc; 0.1 A to 5.0 A at 0.5 Vac to 115 Vac. UL/CSA L117: 5 A at 125 Vac.
Manufacturer: HoneywellPushbutton Switch, style B, sealed military grade pushbutton Switch. Screw Terminals, normal open circuitry, 2.5LBS momentary action, black button.
Manufacturer: OttoAircraft replacement enclosed Switch, 2X SPDT, 4 Amps (resistive) at 28VDC. See drawing for specs.
Manufacturer: HoneywellMomentary sealed, snap action, double break pushbutton Switch. The P1 offers a mechanical life that is well beyond the 50,000 cycles required by MIL-PRF-8805. The double break Switching mechanism has an incredibly fast transfer time, reducing arcing and increasing contact life. The inherent wiping action breaks welds and scrubs the contacts clean on every actuation. The P1 Switch offers vastly improved life under extreme conditions found in most military environments. This version is a special Single pole, normally open double break, .50 tall gray button, black alum case, dust tight design 2. See PDF.
Manufacturer: OttoRugged, watertight pushbutton Switch per MIL-STD-810, 15/32 thread. SPST, Normally open, double break. Red Button, black anodized case.
Manufacturer: OttoSpecial aircraft environmentally sealed limit Switch with Lead wire termination, see attached PDF.
Manufacturer: HoneywellPushbutton Switch - special case, .38 inch red button, 10A resistive at 28VDC or 115VAC, watertight per MIL-PRF-8805, Design 3, Temperature range -55 degrees C to +65 degrees C.
Manufacturer: OttoEnclosed Switch, SPDT (2), Top Plunger, 1 amp, 28 VDC, corrosion resistant steel Enclosure, Sealed per MIL-S-8805 symbol 4
Manufacturer: HoneywellSpecial pushbutton Switch with knurled shroud. P1 series are sealed, Mil Grade MIL-PRF-8805/3 Momentary Action, Snap Action, Double Break. See attached PDF.
Manufacturer: OttoSpecial aircraft environmentally sealed limit Switch, SPDT (2), 1A (resistive) at 28 VDC
Manufacturer: HoneywellSealed push button Switch, normally open, 2.5 lbs operating force, normally open , positive tactile feedback, red button, solder Terminals. Makes and breaks every time! Less than 25 milliohms contact resistance because the OTTO design features inherent rocking action that breaks welds and wipes contacts clean. The P3-71111 is the commercial version of the P1 Pushbutton Switch, offering vastly improved life under extreme conditions found in some industrial environments. The pushbutton is sealed by a silicone boot operating on our patented rolling sleeve, providing longer life and smoother operation over a wide temperature range.
Manufacturer: OttoPushbutton Switch. This is a sealed, SPDT, 2 Circuit, black button, shrouded black anodized case with drain hole.
Manufacturer: OttoRugged sealed pushbutton Switch with horn symbol. SPST Normally Open, Yellow & Black Horn Legend, Water tight to IP68S, faston Terminals.
Manufacturer: OttoPushbutton Switch. Double pole double throw double break. Splash and Dusttight Sealed, 2 Pole, 4 Circuit. Operating Force: 4.0 lbs. +/- 1.0 lb. Circuit: DPDT 4 circuit. Rating: 5 amps Resistive 3 amps, Inductive Contacts: Gold plate per MIL-PRF-8805/101-010, Button: Black nylon.
Manufacturer: OttoPushbutton Switch Momentary Action, Two Step DPDT-double break custom Pushbutton Switch -40 threads, black aluminum alloy case and button. Ring Panel seal, watertight Panel seal, all Hardware included.
Manufacturer: OttoP4 - Momentary Action, Two Step, Custom Pushbutton Turret Terminals, DPDT 6 Terminals, momentary Switching action, red button. Allow 8 weeks delivery if no stock is shown.
Manufacturer: OttoMicro Switch NT Series Toggle Switch, SPDT - 1 pole, 3 position (ON-OFF-ON), Screw Terminal, Standard Lever, UL/CSA L191, IP67/IP68 sealed, transportation grade toggle. Unassembled Hardware is included. MICRO Switch NT Series toggle Switches meet the need for a rugged, cost-effective toggle Switch. Quality construction features include a seal between the toggle lever and bushing, and between the cover and case. These Switches can be used where Panels are subject to splashes, hosedowns, or outdoor environments. The ""Easy-Start"" threaded bushing enables quick alignment of mounting nut to decrease the chance of cross threading. The Panel stand-off with O-ring feature available on some listings, eliminates the need for behind-the-Panel Hardware, provides uniform Panel height, and provides a Panel to cover seal.
Manufacturer: HoneywellP4 - Momentary Action, Two Step, Custom Pushbutton Switch, Turret Terminals, DPDT 8 Terminal circuitry, momentary Switching action, black bezel and black button.
Manufacturer: OttoMicro Switch NT Series Toggle Switch, SPDT - 1 pole, 3 position (Momentary ON - OFF - ON), Screw Terminal, Standard Lever, UL/CSA L192, IP67/IP68 sealed, transportation grade toggle. Unassembled Hardware is included. MICRO Switch NT Series toggle Switches meet the need for a rugged, cost-effective toggle Switch. Quality construction features include a seal between the toggle lever and bushing, and between the cover and case. These Switches can be used where Panels are subject to splashes, hosedowns, or outdoor environments. The ""Easy-Start"" threaded bushing enables quick alignment of mounting nut to decrease the chance of cross threading. The Panel stand-off with O-ring feature available on some listings, eliminates the need for behind-the-Panel Hardware, provides uniform Panel height, and provides a Panel to cover seal.
Manufacturer: HoneywellCustom momentary action 2 Step pushbutton Switch, DPDT, momentary action, red button, black base, sealed to IP64.
Manufacturer: OttoMicro Switch NT Series Toggle Switch, SPST - 1 pole, 2 position (Momentary ON - OFF), Screw Terminal, Standard Lever, UL/CSA L192, IP67/IP68 sealed, transportation grade toggle. Unassembled Hardware is included. MICRO Switch NT Series toggle Switches meet the need for a rugged, cost-effective toggle Switch. Quality construction features include a seal between the toggle lever and bushing, and between the cover and case. These Switches can be used where Panels are subject to splashes, hosedowns, or outdoor environments. The ""Easy-Start"" threaded bushing enables quick alignment of mounting nut to decrease the chance of cross threading. The Panel stand-off with O-ring feature available on some listings, eliminates the need for behind-the-Panel Hardware, provides uniform Panel height, and provides a Panel to cover seal.
Manufacturer: HoneywellMomentary Action, Two Step, Custom Pushbutton Switch. Turret Terminals, black bezel, and red button.
Manufacturer: OttoMicro Switch NT Series Toggle Switch, SPDT - 1 pole, 3 position (Momentary ON - OFF - ON), Screw Terminal, Standard Lever, UL/CSA L192, IP67/IP68 sealed, transportation grade toggle. MICRO Switch NT Series toggle Switches meet the need for a rugged, cost-effective toggle Switch. Quality construction features include a seal between the toggle lever and bushing, and between the cover and case. These Switches can be used where Panels are subject to splashes, hosedowns, or outdoor environments. The ""Easy-Start"" threaded bushing enables quick alignment of mounting nut to decrease the chance of cross threading. The Panel stand-off with O-ring feature available on some listings, eliminates the need for behind-the-Panel Hardware, provides uniform Panel height, and provides a Panel to cover seal.
Manufacturer: HoneywellRugged duty Sealed limit Switch. Double Pole Double Throw. Roller Actuator. 72"" lead wire. MS27240-3 per MIL-S-8805/43.
Manufacturer: OttoLimit Switch. P6-20018 except molded rubber exit header. It is 4PDT, stainless steel housing, 22AWG wire leads.
Manufacturer: OttoLimit Switch, SPST, 7 amps (resistive) @ 28VDC/115VAC, Qualified per MIL-PRF-8805/4, stainless steel housing and plunger.
Manufacturer: OttoMicro Switch Environmentally Sealed Basic Switch, SPDT, snap action, corrosion resistant steel plunger, gold contacts, 1 amp (resistive) at 30VDC.
Manufacturer: HoneywellThis item has been added to your cart!