Manufacturer Catalog

Circuit Breaker, Type 3 phase, push-pull, trip free, 20 amps. FAA approved part number 10-60806-1020

MPN: 5925-01-652-6456

Thermal 35 amp Circuit Breaker. Ignition protected and sealed. Manual reset. Over-current protection for harsh environments, vehicle, electric vehicle, battery chargers, marine, etc.

MPN: 5925-01-656-7507

Three Phase aircraft Circuit Breaker, lightweight, high performance, trip free design. rated 20 amps at 115VAC/ 400Hz. Airbus ASNE0459-200. Other amp ratings available.

MPN: 5925-01-661-2591

Thermal 150 amp Circuit Breaker. Precision,sealed and ignition protected. Manual reset. Self locking mounting nut for easy installation. Provides excellent over-current protection for harsh environments. Formerly MS39065-6

MPN: 5925-01-661-9666

2 AMP Thermal commercial aircraft Circuit Breaker-single phase, miniature ambient compensated and trip free. High vibration resistance.

MPN: 5925-01-662-5184

Circuit Breaker, Type 3 phase, push-pull, trip free, 35 amps. FAA approved part number 10-60806-1035

MPN: 5925-01-667-5283

Switch-refer to attached drawing for specs.

MPN: 5930-00-052-6589

30 amp overload Sensor. Klixon 7235 and 7236 overload sensing controls are designed for the remote sensing of overloads in aircraft electrical systems or other appliCable remote systems. They are for the protection of 28 VDC circuits or for 120 VAC single phase or three phase circuits operating at 60 to 1000 Hz. For three phase AC circuit protection, a 28 VDC control circuit is required. One three phase Relay or three single phase Relays with their coils wired in series may be used in the control circuit. With either arrangement, all three phases will trip open simultaneously when an overload exists in any one phase. See attached spec sheet.

MPN: 5930-01-124-6879

Water resistant Panel seal boot, fits 7274--2, 7277-2, 2TC2 , 2TC14 and other aircraft and mil spec Circuit Breakers with a 7/16" brushing. Circuit Breaker not included. Durable silicon overmolded seal.

MPN: 5930-01-177-2847

5TB6 style Thermostat, hermetically sealed, SPST, with Open Temperature of 135 +/-6F, and a Close Temperature of 40 +/-8F. The Klixon 5BT series Thermostat is a high reliability, hermetically sealed thermal Switch. The single pole, double throw design allows versatility and economy in providing two functions within the same device. Typically these Klixon Switches are used to control and indicate at a preset temperature. One pole can control a cooling fan and the other pole can indicate impending danger.

MPN: 5930-01-575-5771

7271 thermal Circuit Breakers are designed to utilize less space behind the Panel while protecting wire & Cable in aircraft & ground support equipment. Push button style. 25 amps. Similar to 7271-8-25 but this version has a plate mount vs. the neck mount.

MPN: 5935-01-584-0513

7271 thermal Circuit Breakers are designed to utilize less space behind the Panel while protecting wire & Cable in aircraft & ground support equipment. Push button style. 15 amps. Similar to 7271-8-15 but this version has a plate mount vs. the neck mount. Mil spec to MS24510-B-15

MPN: 5935-01-584-0542

Circuit Breaker. Military Spec thermal magnetic Circuit Breaker. Circuit protection unaffected by temperature fluctuations. High vibration resistance and high interrupting capacity. 70 amp.

MPN: 5935-01-584-0543

35 amp overload Sensor. Klixon 7235 and 7236 overload sensing controls are designed for the remote sensing of overloads in aircraft electrical systems or other appliCable remote systems. They are for the protection of 28 VDC circuits or for 120 VAC single phase or three phase circuits operating at 60 to 1000 Hz. For three phase AC circuit protection, a 28 VDC control circuit is required. One three phase Relay or three single phase Relays with their coils wired in series may be used in the control circuit. With either arrangement, all three phases will trip open simultaneously when an overload exists in any one phase. See attached spec sheet.

MPN: 5945-00-337-7835

200 amp overload Sensor. Klixon 7235 and 7236 overload sensing controls are designed for the remote sensing of overloads in aircraft electrical systems or other appliCable remote systems. They are for the protection of 28 VDC circuits or for 120 VAC single phase or three phase circuits operating at 60 to 1000 Hz. For three phase AC circuit protection, a 28 VDC control circuit is required. One three phase Relay or three single phase Relays with their coils wired in series may be used in the control circuit. With either arrangement, all three phases will trip open simultaneously when an overload exists in any one phase.

MPN: 5945-00-472-6388