About this product 2 unthreaded hole single mounting facility. * Manufacturer certifications are shipped with your order FREE of charge
Part Number or Model | MS24171-D1 |
Description | Relay |
Schedule B Class | 8536.41.0050 |
ECCN (Export Control Class) | 9A991.d |
Duty Type | Continuous |
Fragility Factor | Moderately rugged |
Main Contact Load Current Rating At Maximum Rated Voltage | 100 amperes dc inductive load |
Main Contact Load Current Rating At Maximum Rated Voltage | 200 amperes dc resistive load |
Main Contact Load Current Rating At Maximum Rated Voltage | 200.0 amperes dc motor load |
Main Contact Maximum Voltage Rating In Volts | 28.0 dc |
Mounting Facility Pattern | In-line single mounting facility |
Mounting Facility Type And Quantity | 2 unthreaded hole single mounting facility |
Nonpile-up Main Contact Arrangement | 1 pole, single throw, normally open, double make, momentary action |
Operating Voltage Rating And Type At Specificationified Temp | 28.0 volts dc 25 degree celsius single winding |
Overall Height | 3.710 inches nominal |
Overall Length | 4.500 inches maximum |
Overall Width | 2.000 inches maximum |
Purpose For Which Designed | General |
Specification Data | 96906-ms24171 government standard |
Storage Type | General purpose warehouse |
Terminal Type And Quantity | 4 threaded stud all functions |
Test Data Document | 81349-mil-r-6106 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as |
Time Delay | 0.01 seconds maximum fixed release time |
Time Delay | 0.025 seconds maximum fixed operate time |
Unthreaded Mounting Hole Diameter | 0.266 inches nominal single mounting facility |
Winding Dc Resistance Rating | 59.0 ohms minimum single winding |
Winding Quantity | 1 |
Cubic Measure | 33.39 cubic inches |
Coil Quantity | 1 |
Case Material | Metal |
Center To Center Distance Between Mounting Facilities Parallel T | 3 inches nominal single mounting facility |
Arc Quenching Method | Air |
Relay
0.256 inches single mounting facility and 0.276 inches single mounting facility
Special Purpose Relay, 200 amps, moisture sealed, SPST, Type 3*Note photo shown is representative of the 6041 family and is not exact photo of 6041H190.
Operating Voltage Rating And Type At Specific Temp 28.0 volts dc 25 degrees celsius single winding
Toggle, Miniature Positive Action, 5A @ 28 VDC, 3A @ 115 VAC 400 Hertz, 2A @ 115 VAC 60 Hertz Resistive Load, D.P.D.T. ON-OFF-Momentary ON, Bushing Seal, Solder-Lug Terminals.
1 pole, single throw, normally open, momentary action single switch unit MS24523-28 Toggle Switch
This item has been added to your cart!