About this product Voltage Rating: 28 Volt, Amperage Rating: 200 A, Dimensions (L x W x H) 5 x 4.32 x 2.32 inch. * Manufacturer certifications are shipped with your order FREE of charge
| Part Number or Model | 6041H215 |
| Description | Relay |
| Schedule B Class | 8536.49.0075 |
| ECCN (Export Control Class) | EAR99 |
| Unthreaded Mounting Hole Diameter | 0.12 inches nominal single mounting facility |
| Overall Width | 1.875 inches nominal |
| Overall Length | 2.750 inches nominal |
| Overall Height | 3.281 inches nominal |
| Operating Voltage Rating And Type At Specificationified Temp | 12 volts dc 25 degree celsius single winding |
| Nonpile-up Main Contact Arrangement | 1 pole, single throw, normally open, momentary action |
| Mounting Facility Pattern | In-line single mounting facility |
| Mounting Facility Type And Quantity | 2 unthreaded hole single mounting facility |
| Environmental Protection | Dustproof |
| Main Contact Load Current Rating At Maximum Rated Voltage | 800 milliamperes ac resistive load and 6.0 amperes dc resistive load |
| Main Contact Maximum Voltage Rating In Volts | 115 ac and 28.0 dc |
| Coil Quantity | 1 |
| Duty Type | Continuous |
| Terminal Type And Quantity | 4 pin all functions |
| Center To Center Distance Between Mounting Facilities Parallel T | 1.675 inches nominal single mounting facility |
| Winding Quantity | 1 |
Relay
Operating Voltage Rating And Type At Specific Temp 28.0 volts dc 25 degrees celsius single winding, 5945-00-847-3035
Relay
6041H105 Relay
Toggle Switch. Military grade environment proof rugged sealed toggle Switch. 2 pole, 3 position, Screw Terminals, Standard toggle lever, 8501K1 offers DPDT (double pole double throw) circuitry and is an excellent toggle Switch for rugged environments. F
Military spec locking toggle Switch. 2 pole bonded seal on none off. 8856K14 has Positive make and break action and Solder lug termination.
2 circuit Alternate Action Moisture Proof Pushbutton Switch, snap action contacts. See pdf. Red button. Note-we will show no stock because we build them here from sub-components-allow 10 days for delivery but they are NCNR. Photo shows gray but actual but
Environmentally Sealed Positive Action Toggle Switch, two pole, Momentary ON- OFF - Momentary ON circuitry, Screw Terminals, 25A (resistive) at 28 VDC, 115 VAC and 400Hz; or 20A (resistive) at 115 VAC and 60Hz.
This item has been added to your cart!