5 Series Products

Binding post, Panel mount black. Quick connect/disconnect. See pdf for more information.

MPN: 5940-01-408-2996

Manufacturer: Grayhill

Copper Compression Right Angled Lug, Heavy Duty, 1 Hole w/ Inspection Hole, AN-2 Flex, 3/8" Stud, Short Barrel, Tin Plated

MPN: 5940-01-468-9846

Manufacturer: Burndy

Terminal. AN-4, Heavy Duty Right-Angle Terminals, 3/8, 1.04 in L, Inspection hole in barrel permits visual check of wire insertion.

MPN: 5940-01-468-9849

Manufacturer: Burndy

Heavy duty battery feeder stud, brings 6-36VDC power through bulkheads or firewalls. Allow 5-7 days delivery if out of stock.

MPN: 5940-01-473-5614

Manufacturer: LittelFuse

8 AWG Nylon Heavy Duty Ring Terminal, 3/8" Stud Hole Size, Red Insulation

MPN: 5940-01-543-9970

Manufacturer: Burndy

Non-feed through black stud type Junction Block, 3/8-16 thread, 250 amps, 150 (in-lbs) max torque, thermoplastic/ Zinc-plated steel.

MPN: 5940-01-559-9528

Manufacturer: Bussmann

YAEV6C-L1 Burndy female ring Terminal for 6 AWG wire 8-10 stud hole.

MPN: 5940-01-567-1237

Manufacturer: Burndy

Non-feed through red stud type Junction Block, 3/8-16 thread, 250 amps, 150 (in-lbs) max torque, thermoplastic/ Zinc-plated steel.

MPN: 5940-01-570-5078

Manufacturer: Bussmann

#8 AWG Nylon Heavy Duty Ring Terminal,#6-8 Stud Hole Size,Red Insulation

MPN: 5940-01-589-0071

Manufacturer: Burndy

Cu Large Size Uninsul Comp Terminal, Ring Tongue/Bvl Entry, W/InspWindow, AN 3/0, 3/8" Stud, Seamless bbl, Nickel Plated, 45 Index

MPN: 5940-01-623-3228

Manufacturer: Burndy

"Hylug" copper lug- see PDF attached

MPN: 5940-01-627-1597

Manufacturer: Burndy

Compression Terminal lug

MPN: 5940-01-627-1598

Manufacturer: Burndy

Black stud type Junction Block, 5/16-18 thread, 200 amps, 300 (in-lbs) max torque, thermoplastic/ Zinc-plated brass. Heavy-duty ground or power connection points in AC or DC circuits. Feed thru or stand alone mount options available for transformers, communication and computer power sections along with various vehicle electrical systems. Mounting Torque Rating: 48in-lb (5.4Nm) max.

MPN: 5940-01-629-1738

Manufacturer: Bussmann

Prepaint Cleaner/Deoxidizer: Henkel BONDERITE® C-IC 33, 1 gallon Jug

MPN: 594015

Manufacturer: Henkel

Cs-filter

MPN: 59402

Manufacturer: Rolls-Royce

Washer

MPN: 594-023

Manufacturer: Piper Aircraft

Washer

MPN: 594-073

Manufacturer: Piper Aircraft

Conversion Coating: Henkel Bonderite M-CR 600RTU Aero, Orange, 5 gallon Pail

MPN: 594094

Manufacturer: Henkel

Conversion Coating: Bonderite M-NT 5700 Aero, LT Metals, Chrome-Free, Drum

MPN: 594136

Manufacturer: Henkel

Ridoline 4355: Henkel Bonderite C-AK 4355 Aero, Phosphate-Free Liquid, 470 liter Drum

MPN: 594214

Manufacturer: Henkel

Adhesive Sealant: Henkel Loctite SI 594, White, 85 gram Tube

MPN: 59430

Manufacturer: Henkel

Cleaner: Henkel Metalprep 79, Multi-purpose, Phosphoric Acid-Based, Gallon

MPN: 594305

Manufacturer: Henkel

Conversion Coating: Henkel Bonderite® M-CR 1001, Aero, 1 gallon

MPN: 59441

Manufacturer: Henkel

Prepaint Cleaner/Deoxidizer: Henkel BONDERITE® C-IC 33, Aero, Clear, 1 quart

MPN: 594416

Manufacturer: Henkel

Conversion Coating: Henkel Bonderite M-CR 1201 Aero, 1 gallon

MPN: 594418

Manufacturer: Henkel

Conversion Coating: Henkel Bonderite M-CR 1201 Aero (Alodine 1201), Hexavalent Chromium, 1 quart Bottle

MPN: 594419

Manufacturer: Henkel

200 Amperes @ 28 VDC. Continuous Duty, Gasketed, Top Mounting, MIL-DTL-6106 & MS24171-D1 Approved., Voltage Rating: 28 Volt, Amperage Rating: 200 A, Dimensions (L x W x H) 5 x 4.32 x 2.32 inch

MPN: 5945-00-189-6391

Manufacturer: Safran

Power Relay, S.P.S.T. - N.O. coil rating 12VDC, continuous power contacts rated 200 Amps (resistive) @ 28 VDC, Continuous Duty, Gasketed, Side Mounting, Designed to MIL-PRF-6106. Formerly known as 6041H105A.

MPN: 5945-00-258-2779

Manufacturer: Safran

Standard Series Pull Tubular Solenoid, 24 VDC, 25% Duty, 9.30 ohm, 61.9 W.

MPN: 5945-00-309-0435

Manufacturer: Johnson Electric

35 amp overload Sensor. Klixon 7235 and 7236 overload sensing controls are designed for the remote sensing of overloads in aircraft electrical systems or other appliCable remote systems. They are for the protection of 28 VDC circuits or for 120 VAC single phase or three phase circuits operating at 60 to 1000 Hz. For three phase AC circuit protection, a 28 VDC control circuit is required. One three phase Relay or three single phase Relays with their coils wired in series may be used in the control circuit. With either arrangement, all three phases will trip open simultaneously when an overload exists in any one phase. See attached spec sheet.

MPN: 5945-00-337-7835

Manufacturer: Sensata