4 way toggle trim Switch. Single pole, 4 throw, center off, momentary contact. Self return to center off. 1 amp inductive at 28 VDC, 100,000 cycles. Please refer to specifications for additional information.
MPN: 5930-01-464-4642
Manufacturer: Otto
Micro Switch NT Series Toggle Switch, DPDT - 2 pole, 3 position (ON-OFF-ON), Screw Terminal, Standard Lever, Thermoplastic case, UL/CSA L191, IP67/IP68 sealed. MICRO Switch NT Series toggle Switches meet the need for a rugged, cost-effective toggle Switch. Quality construction features include a seal between the toggle lever and bushing, and between the cover and case. These Switches can be used where Panels are subject to splashes, hosedowns, or outdoor environments. The "Easy-Start" threaded bushing enables quick alignment of mounting nut to decrease the chance of cross threading. The Panel stand-off with O-ring feature available on some listings, eliminates the need for behind-the-Panel Hardware, provides uniform Panel height, and provides a Panel to cover seal.
MPN: 5930-01-467-2384
Manufacturer: Honeywell
Micro Switch NT Series Toggle Switch, DPDT - 2 pole, 3 position (Momentary ON - OFF - Momentary ON), Quick Connect Terminal, Standard Lever. Completely sealed Switching chamber; NEMA 3, 3R, 4, and 13; UL recognized, File E12252, Vol. 1, Section 44; CSA certified, File LR4442; CE approved. Capable of withstanding a temperature of 160 degrees F continuously at full rated load. MICRO Switch NT Series toggle Switches meet the need for a rugged, cost-effective toggle Switch. Quality construction features include a seal between the toggle lever and bushing, and between the cover and case. These Switches can be used where Panels are subject to splashes, hosedowns, or outdoor environments. The "Easy-Start" threaded bushing enables quick alignment of mounting nut to decrease the chance of cross threading. The Panel stand-off with O-ring feature available on some listings, eliminates the need for behind-the-Panel Hardware, provides uniform Panel height, and provides a Panel to cover seal.
MPN: 5930-01-467-2463
Manufacturer: Honeywell
Limit Switch. P6-20018 except molded rubber exit header. It is 4PDT, stainless steel housing, 22AWG wire leads.
MPN: 5930-01-468-5473
Manufacturer: Otto
Enclosed Switch, SPDT (2), Top Plunger, 1 amp, 28 VDC, corrosion resistant steel Enclosure, Sealed per MIL-S-8805 symbol 4
MPN: 5930-01-471-3248
Manufacturer: Honeywell
XE Series Environmentally Sealed Basic Switch, Single Pole Double Throw Circuitry, 1 A at 28 Vdc, Pin Plunger Actuator, Leadwire Termination, Military Part Number MS27994-5.
MPN: 5930-01-479-5308
Manufacturer: Honeywell
Micro Switch NT Series Toggle Switch, DPDT - 2 pole, 2 position (Momentary ON - ON, Screw Terminal, Standard Lever, UL/CSA L192, IP67/IP68 sealed, thermoplastic case. MICRO Switch NT Series toggle Switches meet the need for a rugged, cost-effective toggle Switch. Quality construction features include a seal between the toggle lever and bushing, and between the cover and case. These Switches can be used where Panels are subject to splashes, hosedowns, or outdoor environments. The "Easy-Start" threaded bushing enables quick alignment of mounting nut to decrease the chance of cross threading. The Panel stand-off with O-ring feature available on some listings, eliminates the need for behind-the-Panel Hardware, provides uniform Panel height, and provides a Panel to cover seal.
MPN: 5930-01-482-4492
Manufacturer: Honeywell
Micro Switch TW Series Toggle Switch, DPDT - 2 pole, 2 position (Momentary ON - ON), IWTS termination, Locking Lever (F) - Locked in extreme position (opposite keyway). Ampere/Voltage Range (Resistive Load): 0.1 A to 5.0 A at 0.5 Vac to 115 Vac; 0.1 A to 5.0 A at 0.5 Vdc to 28 Vdc. UL/CSA L117: 5 A at 125 Vac
MPN: 5930-01-485-5102
Manufacturer: Honeywell
Micro Switch TW Series Toggle Switch, DPDT - 2 pole, 2 position (ON-ON), IWTS Terminal, fine silver contacts, Locking Lever (D) - Locked out of Center position. Ampere/Voltage Range (Resistive Load): 0.1 A to 5.0 A at 0.5 Vac to 115 Vac; 0.1 A to 5.0 A at 0.5 Vdc to 28 Vdc. UL/CSA L117: 5 A at 125 Vac MICRO Switch TW Series toggle Switches are military qualified to MIL-83731 specifications for sealed and unsealed toggle Switches. Quality construction features include an available bonded seal between the toggle lever and bushing for those applications where a sealing-related failure cannot be tolerated. The durable design of the TW Series toggle is well-suited for many military, aerospace and other demanding applications where space behind the Panel is limited. TW toggles feature a miniature military-grade design with environmental sealing capabilities and can be configured with a large selection of circuitries, electrical terminations, lever and bushing designs, and contact material options to satisfy a diverse range of applications.
MPN: 5930-01-487-8802
Manufacturer: Honeywell
Micro Switch TW Series Toggle Switch, 1 pole, 2 position, locking lever with 15/32 bushing.Quality construction features include an available bonded seal between the toggle lever and bushing for those applications where a sealing-related failure cannot be tolerated. The durable design of the TW Series toggle is well-suited for many military, aerospace and other demanding applications where space behind the Panel is limited. TW toggles feature a miniature military-grade design with environmental sealing capabilities and can be configured with a large selection of circuitries, electrical terminations, lever and bushing designs, and contact material options to satisfy a diverse range of applications.
MPN: 5930-01-490-3849
Manufacturer: Honeywell
Micro Switch TL Series Toggle Switch, SPDT - 1 pole, 3 position (Momentary ON - OFF - ON), Screw Terminal, Tab Lever.
MPN: 5930-01-496-7296
Manufacturer: Honeywell
Micro Switch HM series Switch Assembly - 2x SPDT Switches, 4 amps (resistive) at 28VDC.
MPN: 5930-01-501-1694
Manufacturer: Honeywell
Toggle Switch, MIL-DTL-3950 & MS24523-30 Approved, 15A @ 28 VDC & 115 VAC 60 or 400 Hertz Resistive Load, S.P.S.T. OFF-NONE-Momentary ON, Environmentally Sealed, Screw Terminals. Sealed to IP68.
MPN: 5930-01-508-7667
Manufacturer: Safran
The P7 series subminiature Switches embrace today's technology requirements by allowing for a large number of Switches to fit within a faceplate or a small Panel space.The long life snap-action design offers low contact resistance (25 milliohms max initial) and is protected from the environment by a silicone rubber boot, operating on a rolling sleeve principle that gives long sealed life and smooth operation. The P7 series is designed to meet the requirements of MIL-PRF-8805 including low level Switching (10mA @ 30mV) with power Switching up to 5 amps at 28VDC as well.
MPN: 5930-01-509-2251
Manufacturer: Otto
Visi-rocker Switch, single pole, Off-None-On, .250 quick connect tabs Terminals, black gloss visi-rocker (2 colors), with black matte bezel, hot stamp, visi-red rocker The R-Series Curvette single pole rocker Switches are aesthetically pleasing miniature snap-in Switches. Due to the patented mounting ear design, they are compatible with a wide range of standard Panel cutouts. Options include a range of momentary and maintained single or double throw circuits, various terminations, and legend options, as well as a variety of rocker colors and styles, including our unique curved two-color molded Visi-Rocker for low cost "ON" indication.
MPN: 5930-01-513-1923
Manufacturer: Carling Technologies
Micro Switch 200FW series, Shielded 3-wire DC Sinking (NPN), N.O. proximity Sensor, 0.625 in cylindrical housing , Connector version mates with MS3116-8-4S. Nominal sensing distance of 2,4 mm to 11,4 mm [.09 in to .45 in] with 101MG7 as the magnetic target.
MPN: 5930-01-515-9318
Manufacturer: Honeywell
Micro Switch NT Series Toggle Switch, SPST - 1 pole, 2 position (Momentary ON - OFF), Quick Connect Terminal, Standard Lever. Completely sealed Switching chamber; NEMA 3, 3R, 4, and 13; UL recognized, File E12252, Vol. 1, Section 44; CSA certified, File LR4442; CE approved. Capable of withstanding a temperature of 160 degrees F continuously at full rated load. MICRO Switch NT Series toggle Switches meet the need for a rugged, cost-effective toggle Switch. Quality construction features include a seal between the toggle lever and bushing, and between the cover and case. These Switches can be used where Panels are subject to splashes, hosedowns, or outdoor environments. The "Easy-Start" threaded bushing enables quick alignment of mounting nut to decrease the chance of cross threading. The Panel stand-off with O-ring feature available on some listings, eliminates the need for behind-the-Panel Hardware, provides uniform Panel height, and provides a Panel to cover seal.
MPN: 5930-01-517-0360
Manufacturer: Honeywell
Momentary action, military spec (M8805/110-1561), sealed sub-subminiature push button snap-action Switch. The P7 series incorporates OTTO's patented double break design in a significantly smaller package. These subminiature Switches embrace today's technology requirements by allowing for a large number of Switches to fit within a faceplate. The long life snap-action design is protected from the environment by a silicon rubber boot. This version offers a short body, is watertight, has solder Terminals, has 2 circuit low level Switching, a black bezel and red button.
MPN: 5930-01-519-7052
Manufacturer: Otto
Toggle, MIL-DTL-3950 & MS24524-28 Approved. 15 @ 28 VDC or 15A 115VAC 60 or 400 Hertz Resistive Load, D.P,S.T. None-OFF-Momentary ON, Environmentally Sealed, Screw Terminals. Allow 10 week leadtime for delivery. Sealed to IP68.
MPN: 5930-01-520-4190
Manufacturer: Safran
Pushbutton Switch, style B, sealed military grade pushbutton Switch. Screw Terminals, normal open circuitry, 2.5LBS momentary action, black button.
MPN: 5930-01-523-1919
Manufacturer: Otto
Micro Switch Environmentally Sealed Basic Switch, SPDT, snap action, corrosion resistant steel plunger, gold contacts, 1 amp (resistive) at 30VDC.
MPN: 5930-01-524-5473
Manufacturer: Honeywell
Micro Switch SX Series Subminiature Basic Switch, Single Pole Double Throw (SPDT), 28 Vdc, 1 A, Pin Plunger Actuator, Solder Termination.
MPN: 5930-01-527-5676
Manufacturer: Honeywell
SPDT ON-NONE-ON mini toggle Switch with .41 bat toggle Handle. Splash proof with bushing seal. Gold/nickel/silver Terminals. Specially priced for this lot!
MPN: 5930-01-529-3109
Manufacturer: ElectroSwitch
Momentary Action, Two Step, Custom Pushbutton Switch. Turret Terminals, black bezel, and red button.
MPN: 5930-01-531-5318
Manufacturer: Otto
AML24 Series Rocker Switch, 4PDT, 3 position, Gold Contacts, 0.025 in x 0.025 in (Printed Circuit or Push-on), Non-Lighted, Rectangle, Snap-in Panel, button sold separately
MPN: 5930-01-533-5294
Manufacturer: Honeywell
Micro Switch BZ Series Premium Large Basic Switch, Single Pole Double Throw Circuitry, 15 A at 125 Vac, High Overtravel Cross Roller Plunger Actuator, 2,5 N - 3,61 N [9 oz - 13 oz] Operating Force, Silver Contacts, Screw Termination, CE, CSA, DEMKO,.
MPN: 5930-01-533-7297
Manufacturer: Honeywell
Clear Push button Switch Boot, 3/8-32 NEF-2B thread, IP66/68 rated. Also works on some Circuit Breakers. See attached spec sheet and PDF.
MPN: 5930-01-539-0558
Manufacturer: APM Hexseal
Rocker Switch, universal weather resistant, SPDT, On-Off-On Rated at 25A at 12V DC, 15A at 24V DC, sealed to IP66 for water resistance (high Pressure wash), three brass blade Terminals
MPN: 5930-01-541-0861
Manufacturer: LittelFuse
Sealed pushbutton Switch. Momentary action, snap action with positive tactile feel. Normally open. Solder Terminals. Black body, red button. Rated at 10 amps.
MPN: 5930-01-542-1219
Manufacturer: Otto
This item has been added to your cart!