About this product MS24523-21 Toggle Switch. * Manufacturer certifications are shipped with your order FREE of charge
| Part Number or Model | MS24523-21 |
| Description | Toggle Switch |
| Schedule B Class | |
| ECCN (Export Control Class) | EAR99 |
| Thread Series Designator | Uns |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Class | 2a |
| Overall Length | 1.270 inches maximum |
| Terminal Type And Quantity | 3 tab, solder lug |
| Nonpile-up Contact Arrangement | 1 pole, double throw, three positions maintained single switch unit |
| Mounting Method | Threaded bushing |
| Maximum Voltage Rating In Volts | 115 ac and 28 dc |
| Inclosure Type | Fully inclosed |
| Features Provided | Actuator seal |
| Hazardous Locations/environmental Protection | Vaportight |
| Bushing Length | 0.455 inches minimum and 0.485 inches maximum |
| Contact Load Current Rating At Maximum Rated Voltage | 20 amperes resistive dc and 15 amperes inductive dc and 5.000 amperes lamp dc and 15.000 amperes resistive ac and 10.000 amperes inductive ac and 3.000 amperes lamp ac |
| Body Width | 0.635 inches maximum |
| Body Length | 1.270 inches maximum |
| Body Style | Bushing mount |
| Body Height | 0.890 inches minimum and 0.930 inches maximum |
| Actuator Style | Round |
| Actuator Position-action Relationship | Up position maintained and down position maintained and center position maintained |
| Test Data Document | 81349-mil-s-3950 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as |
| Actuator Height | 0.665 inches minimum and 0.695 inches maximum |
| Actuator Diameter | 0.237 inches minimum and 0.243 inches maximum |
| Thread Size | 0.469 inches |
Toggle Switch
1 pole, single throw, both positions maintained single switch unit MS24523-33 Toggle Switch
Switch
1 pole, double throw, one position momentary single switch unit MS24523-32 Switch
Switch
1 pole, double throw, one position momentary, two positions maintained single switch unit MS24523-31 Switch
Switch
1 pole, single throw, normally open, momentary action single switch unit MS24523-30 Switch
Toggle Switch
1 pole, single throw, normally closed, momentary action single switch unit MS24523-29 Toggle Switch
Toggle Switch
1 pole, single throw, normally open, momentary action single switch unit MS24523-28 Toggle Switch
1.P.S.T. - N.O. 50 Amperes @ 28 VDC, Continuous Duty, Gasketed, Side Mounting, MIL-DTL-6106 & MS24166-D2 Approved. Formerly known as AN3350-1.
Very Rugged Flush Mounted Environmentally Sealed Positive Action Toggle Switch. High electrical/mechanical reliability. Non-teasible mechanism. Wiping action contacts. Positive make and break Action. Molded-in Terminal numbers. Three hole design for flush
Switch Guard, MIL-G-7703, One Hole Mount for 3 Position Switches, Returns lever from up position to center position, Phenolic Red Lever, Keyway tab is Opposite Hinged End
Environmentally Sealed Positive Action Toggle Switch, two pole, Momentary ON- OFF - Momentary ON circuitry, Screw Terminals, 25A (resistive) at 28 VDC, 115 VAC and 400Hz; or 20A (resistive) at 115 VAC and 60Hz.
This item has been added to your cart!