About this product 1 pole, single throw, normally open, momentary action, Dimensions (L x W x H) 3.25 x 2.25 x 3.375 inch. * Manufacturer certifications are shipped with your order FREE of charge
Part Number or Model | MS24166-D2 |
Description | Relay |
Schedule B Class | 8536.41.0065 |
ECCN (Export Control Class) | 9A991.d |
Winding Quantity | 1 |
Winding Dc Resistance Rating | 94.0 ohms nominal single winding |
Unthreaded Mounting Hole Diameter | 0.209 inches minimum single mounting facility and 0.229 inches maximum single mounting facility |
Terminal Type And Quantity | 4 threaded stud all functions |
Storage Type | General purpose warehouse |
Specification Data | 96906-ms24166 government standard |
Purpose For Which Designed | General |
Overall Length | 2.75 inches maximum |
Overall Width | 2.125 inches maximum |
Overall Height | 2.50 inches maximum |
Main Contact Maximum Voltage Rating In Volts | 115 ac and 28 dc |
Mounting Facility Pattern | In-line single mounting facility |
Mounting Facility Type And Quantity | 2 unthreaded hole single mounting facility |
Nonpile-up Main Contact Arrangement | 1 pole, single throw, normally open, momentary action |
Operating Voltage Rating And Type At Specificationified Temp | 28 volts dc 25 degree celsius single winding |
Main Contact Load Current Rating At Maximum Rated Voltage | 50 amperes dc resistive load |
Main Contact Load Current Rating At Maximum Rated Voltage | 50 amperes dc motor load |
Main Contact Load Current Rating At Maximum Rated Voltage | 25 amperes dc lamp load |
Main Contact Load Current Rating At Maximum Rated Voltage | 50 amperes dc inductive load |
Fragility Factor | Moderately rugged |
Duty Type | Continuous |
Coil Quantity | 1 |
Cubic Measure | 14.609 cubic inches |
Center To Center Distance Between Mounting Facilities Parallel T | 1.844 inches minimum single mounting facility and 1.906 inches maximum single mounting facility |
Relay
50 amperes dc resistive load, 5945-00-686-6877
Switch. Pushbutton Switch Alternate Action,Push to make-Push to break,2.5A @ 28 VDC,Resistive Load,S.P.S.T.,Unsealed,Clear Bezel,Gray Button,Screw Terminals
Microphone Pushbutton Foot Operated Switch, 25A @ 28 VDC, 15A @ 115 VAC 60 or 400 Hertz, Resistive Load, 1.P.S.T. OFF-Momentary ON, Flush Mounting Screw Terminals. Longer button-see spec sheet/pdf here. Terminal Hardware included.
Miniature Positive Action Rugged Toggle Switch, 5A @ 28VDC, 3A @ 115 VAC 400 Hertz, 2A @ 115 VAC 60 Hertz Resistive Load, S.P.D.T. ON-OFF-ON, Bushing Seal. Mil qualified to MS90310-211, The Eaton 8868k1 has Solder-Lug Terminals.
Military spec locking toggle Switch. 2 pole bonded seal on none off. 8856K14 has Positive make and break action and Solder lug termination.
This item has been added to your cart!