About this product 50 amperes dc resistive load, moderately rugged. * Manufacturer certifications are shipped with your order FREE of charge
Part Number or Model | MS24166-D1 |
Description | Relay |
Schedule B Class | 8536.41.0065 |
ECCN (Export Control Class) | 9A991.d |
Unthreaded Mounting Hole Diameter | 0.219 inches nominal single mounting facility |
Winding Dc Resistance Rating | 94 ohms nominal single winding |
Winding Quantity | 1 |
Time Delay | 0.02 seconds maximum fixed operate time |
Time Delay | 0.01 seconds maximum fixed release time |
Storage Type | General purpose warehouse |
Terminal Type And Quantity | 4 threaded stud all functions |
Overall Height | 2.625 inches maximum |
Overall Length | 2.75 inches maximum |
Overall Width | 2.125 inches maximum |
Purpose For Which Designed | General |
Specification Data | 96906-ms24166 government standard |
Operating Voltage Rating And Type At Specificationified Temp | 28 volts dc 25 degree celsius single winding |
Nonpile-up Main Contact Arrangement | 1 pole, single throw, normally open, double make, momentary action |
Main Contact Load Current Rating At Maximum Rated Voltage | 50.0 amperes dc motor load |
Main Contact Load Current Rating At Maximum Rated Voltage | 50.0 amperes dc inductive load |
Main Contact Load Current Rating At Maximum Rated Voltage | 25.0 amperes dc lamp load |
Main Contact Load Current Rating At Maximum Rated Voltage | 50.0 amperes dc resistive load |
Main Contact Maximum Voltage Rating In Volts | 28 dc |
Mounting Facility Pattern | In-line single mounting facility |
Mounting Facility Type And Quantity | 2 unthreaded hole single mounting facility |
Fragility Factor | Moderately rugged |
Duty Type | Continuous |
Cubic Measure | 15.339 cubic inches |
Coil Quantity | 1 |
Case Material | Metal |
Center To Center Distance Between Mounting Facilities Parallel T | 2.188 inches nominal single mounting facility |
Arc Quenching Method | Air |
Relay
Moderately rugged power relay, 5945-01-311-9927
Military spec locking toggle Switch. 2 pole bonded seal on none off. 8856K14 has Positive make and break action and Solder lug termination.
Environmentally Sealed Positive Action Toggle Switch, two pole, Momentary ON- OFF - Momentary ON circuitry, Screw Terminals, 25A (resistive) at 28 VDC, 115 VAC and 400Hz; or 20A (resistive) at 115 VAC and 60Hz.
Toggle Switch Guard, MIL-G-7703 & Mil Qualified to MS25214-2,One Hole Mount for 3 Position Switches, Returns lever to center position from extreme position, Phenolic Red Lever, Keyway for 8494k2 is opposite hinged end.
Switch Guard, MIL-G-7703, One Hole Mount for 2 or 3 Position Switches, Closing guard does not effect toggle position, Phenolic Red Lever, Keyway Opp. Hinged end.*Note photo is for reference only- see new PDF as this toggle Switch Guard now has lever stop
This item has been added to your cart!