Manufacturer Catalog
Otto

Limit Switch, SPST, 7 amps (resistive) @ 28VDC/115VAC, Qualified per MIL-PRF-8805/4, stainless steel housing and plunger.

MPN: 5930-01-258-9663

Pushbutton Switch - special case, .38 inch red button, 10A resistive at 28VDC or 115VAC, watertight per MIL-PRF-8805, Design 3, Temperature range -55 degrees C to +65 degrees C.

MPN: 5930-01-258-9669

Rugged Snap Action Pushbutton Switch. Normally Open. Dust tight. Internal silicon rubber boot seals out contaminants. Black.160 button. 5 amps@28vdc.Solder Terminals.

MPN: 5930-01-276-2975

Sealed push button Switch, normally open, 2.5 lbs operating force, normally open , positive tactile feedback, red button, solder Terminals. Makes and breaks every time! Less than 25 milliohms contact resistance because the OTTO design features inherent rocking action that breaks welds and wipes contacts clean. The P3-71111 is the commercial version of the P1 Pushbutton Switch, offering vastly improved life under extreme conditions found in some industrial environments. The pushbutton is sealed by a silicone boot operating on our patented rolling sleeve, providing longer life and smoother operation over a wide temperature range.

MPN: 5930-01-291-4885

Special Rugged Snap Action Mini Pushbutton Switch. 2 circuit. Dust & moisture tight. Black .375 button. Silicon rubber seal gives long life and smooth operation. See PDF Drawing here.

MPN: 5930-01-295-8496

Switch, Locking toggle. (3 POLE - 3 POS.). Basic Switch elements per MIL-PRF-8805/4 except with integral lever. Electrical life: 25,000 cycles. See drawing for more information.

MPN: 5930-01-297-0821

Precision mil spec trigger Switch. 7 amps @ 28 VDC. 2 pole Black housing, red button. Mil qualified to M8805/111-01.

MPN: 5930-01-298-2214

Push button Switch. Sub miniature. Long life. 5 amp sealed momentary snap action Mil Spec with positive tactile feedback. Same as part # P7-331222.

MPN: 5930-01-303-4812

Push button Switch. Sub miniature. Long life. 5 amp sealed momentary snap action Mil Spec with positive tactile feedback. Same as part # P7-531122.

MPN: 5930-01-304-4353

Pushbutton Switch. This is a sealed, SPDT, 2 Circuit, black button, shrouded black anodized case with drain hole.

MPN: 5930-01-320-7829

Snap action pushbutton Switch, watertight to MIL-PRF-M8805, black, 28VDC NSN FEDSTK 5930-01-362-0430 . See PDF drawing here.

MPN: 5930-01-362-0430

Trim Switch Toggle: SPST-NO, ON-OFF-ON Pushbutton: DPST-NO double break. Rating: 1 amp Resistive0.5 amp Inductive. Electrical Life: 50,000 cycles. Seal: Enclosure Design 4, resilient per MIL-PRF-8805. Button: Black nylon. Case: Black anodized aluminum alloy. The T2 series provides two functions in one compact Switch: toggle and pushbutton action. Features toggle lockout when pushbutton mode is actuated and pushbutton lockout when in toggle mode. A resilient seal in the plunger provides splash proof and dust tight seal.

MPN: 5930-01-376-0911

4 way min trim Switch. Meets mil spec M9419/2-004. Dust tight to IP64 & Watertight to IP68S. Mini Trims are typically press fit into control Grip or Panel mounted using versions with an 11/16" threaded case. S Switch is capable of withstanding a force of 20.0 lbs. applied to the actuating button. The button also withstands 15.0 lbs. minimum pull force. Black case and button. See the attached PDF for additional specifications.

MPN: 5930-01-376-3002

P4 - Momentary Action, Two Step, Custom Pushbutton Switch, Turret Terminals, DPDT 8 Terminal circuitry, momentary Switching action, black bezel and black button.

MPN: 5930-01-408-4582

Rugged sealed pushbutton Switch with horn symbol. SPST Normally Open, Yellow & Black Horn Legend, Water tight to IP68S, faston Terminals.

MPN: 5930-01-423-3691