Electrical
Switches And Guards

ET Series Toggle Switch, 2 pole, environmentally sealed, electrically held- 3 position, Solder T type Terminal, Locking Lever, Military Part Number . 27ET61-T-E is mil qualified to M5594/6-1E

MPN: 5930-01-251-6742

Manufacturer: Honeywell

5000 series Pressure Switch with standard Terminals, Factory set at 60 PSI, Normally Open (N.O), single circuit - 2 Terminals.

MPN: 5930-01-252-3915

Manufacturer: Honeywell

Switch. Environmentally Sealed Toggle Switch,2 pole,Electrically held 3 position,Solder T2 type Terminal,Locking Lever.

MPN: 5930-01-266-5426

Manufacturer: Honeywell

Special aircraft environmentally sealed limit Switch, SPDT (2), 1A (resistive) at 28 VDC

MPN: 5930-01-271-5996

Manufacturer: Honeywell

ET Series Toggle Switch, 2 pole, Electrically held- 2 position, Connector Terminal, Locking Lever MICRO Switch ET toggle.

MPN: 5930-01-275-8237

Manufacturer: Honeywell

Micro Switch Subminiature basic Switch with roller, SPDT circuitry, rated for 5A @ 250 VAC, with 0.535 inch simulated roller lever and quick termination. Please see attached spec sheet for exact details.

MPN: 5930-01-282-7756

Manufacturer: Honeywell

Manual Touch Feedback Pushbutton Switch, 2 SPDT Circuits, On-momentary action, 5 A @ 115 Vac, black button .

MPN: 5930-01-285-6665

Manufacturer: Honeywell

Enclosed Switch. JS-200 is sealed per MIL-PRF-8805.

MPN: 5930-01-297-2252

Manufacturer: Honeywell

Environmentally Sealed Limit Switch with Leadwire Termination,Plunger actuation,Four Pole Double Throw Circuitry,7 A (Resistive) ampere rating at 28 Vdc.

MPN: 5930-01-310-9359

Manufacturer: Honeywell

Micro Switch V7 Series Miniature Basic Switch, Single Pole Double Throw Circuitry, 11 A at 277 Vac, Roller Lever Actuator, 2,78 N [10.0 oz] Maximum Operating Force, Silver Contacts, Quick Connect Termination.

MPN: 5930-01-324-4755

Manufacturer: Honeywell

Micro Switch Basic Switch, SPDT, with metric mount holes. V3-19 and V3-19M are the same Switch except that the V3-19M has metric mounting holes. - see spec sheet

MPN: 5930-01-331-7483

Manufacturer: Honeywell

Micro Switch SX Series Subminiature Basic Switch, Single Pole Double Throw (SPDT), 125 Vac, 1 A, Pin Plunger Actuator, Solder Termination.

MPN: 5930-01-333-8922

Manufacturer: Honeywell

Aircraft replacement enclosed Switch, 2X SPDT, 4 Amps (resistive) at 28VDC. See drawing for specs.

MPN: 5930-01-374-6213

Manufacturer: Honeywell

Micro Switch BZ Series Premium Large Basic Switch, Single Pole Double Throw Circuitry, 15 A at 115 Vac, Overtravel Plunger Actuator, Screw Termination, Silver Contacts, Military Part Number M8805/1-020.

MPN: 5930-01-377-9887

Manufacturer: Honeywell

Environmentally sealed limit Switch with Leadwire termination, Roller Plunger actuation, Four Pole Double Throw Circuitry, 7 A (Resistive) ampere rating at 28 Vdc.

MPN: 5930-01-387-3285

Manufacturer: Honeywell

Micro Switch TL Series Toggle Switch, DPST - 2 pole, 2 position (OFF-ON), IWTS (16-20 Gage) Terminal, Standard Lever, Military Part Number MS27785-22. Ampere/Voltage Range (Resistive Load): 0.75 A at 115 Vdc; 0.5 A at 250 Vdc; 0.5 A to 6 A at 0.5 Vac to 230 Vac; 0.5 A to 7.5 A at 0.5 Vdc to 28 Vdc. UL/CSA: L191: 15 A-125, 250, 277 Vac; 1/2 Hp-125 Vac; 1 Hp-250, 277 Vac; 5 A-120 Vac "L"

MPN: 5930-01-397-6116

Manufacturer: Honeywell

Micro Switch TL Series Toggle Switch, DPDT - 2 pole, 3 position (Momentary ON- OFF - Momentary ON), IWTS (16-20 Gage) Terminal, Locking Lever (E) - locked in center position, Military Part Number MS27788-27E. Ampere/Voltage Range (Resistive Load): 0.5 A at 250 Vdc; 0.5 A to 7.5 A at 0.5 Vdc to 28 Vdc; 0.5 A to 6 A at 0.5 Vac to 230 Vac; 0.75 A at 115 Vdc. UL/CSA L192: 10 A-125, 250, 277 Vac; 1/4 Hp-125 Vac; 1/2 Hp-250, 277 Vac; 3 A-125 Vac "L".

MPN: 5930-01-406-6621

Manufacturer: Honeywell

Micro Switch Series HDLS Stainless Steel Non Plug-in: Top Roller Plunger; 1NC 1NO Single-Pole, Double-Throw, Snap-Action, Double-Break; 0.75 in - 14NPT conduit.

MPN: 5930-01-420-9747

Manufacturer: Honeywell

39EN3-R Environmental Seal (Symbol 4 Resilient) rating . Two Pole, Double Throw circuit, momentary action, Custom Assembly, Auxiliary Roller Actuator,integral Connector

MPN: 5930-01-422-8535

Manufacturer: Honeywell

Micro Switch TP Series Rocker Switch, SPDT - 1 pole, 3 position (Momentary ON - OFF - ON), Screw Terminal, Above Panel Mounting.Ampere/Voltage Range (Resistive Load): 0.5 A to 15 A at 0.5 Vdc to 28 Vdc|0.5 A to 10 A at 0.5 Vac to 7 Vac|0.75 A at 115 Vdc|0.5 A at 250 Vdc. LED/Lamp/Neon Voltage L192: 10 A-125, 250, 277 Vac; 1/4 Hp-125 Vac; 1/2 Hp-250, 277 Vac; 3 A-125 Vac "L".

MPN: 5930-01-426-4318

Manufacturer: Honeywell

Micro Switch AT Series Toggle Switch, 4PDT - 4 pole, 3 position, H58 Terminal, Standard Lever, FAA-PMA approved, contains 24K solid gold contacts.

MPN: 5930-01-445-8533

Manufacturer: Honeywell

Micro Switch AT Series Toggle Switch, 4PDT - 4 pole, 3 position, H58 Terminal, Locking Lever (K) - Locked in center and extreme position (opposite keyway), FAA-PMA approved, contains 24K solid gold contacts.

MPN: 5930-01-445-8535

Manufacturer: Honeywell

Micro Switch NT Series Toggle Switch, SPDT - 1 pole, 3 position (Momentary ON - OFF - ON), Quick Connect Terminal, Standard Lever. Completely sealed Switching chamber; NEMA 3, 3R, 4, and 13; UL recognized, File E12252, Vol. 1, Section 44; CSA certified, File LR4442; CE approved. Capable of withstanding a temperature of 160 degrees F continuously at full rated load. MICRO Switch NT Series toggle Switches meet the need for a rugged, cost-effective toggle Switch. Quality construction features include a seal between the toggle lever and bushing, and between the cover and case. These Switches can be used where Panels are subject to splashes, hosedowns, or outdoor environments. The "Easy-Start" threaded bushing enables quick alignment of mounting nut to decrease the chance of cross threading. The Panel stand-off with O-ring feature available on some listings, eliminates the need for behind-the-Panel Hardware, provides uniform Panel height, and provides a Panel to cover seal.

MPN: 5930-01-456-9303

Manufacturer: Honeywell

Hermetically sealed limit Switch. 1A

MPN: 5930-01-464-1473

Manufacturer: Honeywell

Micro Switch NT Series Toggle Switch, DPDT - 2 pole, 3 position (ON-OFF-ON), Screw Terminal, Standard Lever, Thermoplastic case, UL/CSA L191, IP67/IP68 sealed. MICRO Switch NT Series toggle Switches meet the need for a rugged, cost-effective toggle Switch. Quality construction features include a seal between the toggle lever and bushing, and between the cover and case. These Switches can be used where Panels are subject to splashes, hosedowns, or outdoor environments. The "Easy-Start" threaded bushing enables quick alignment of mounting nut to decrease the chance of cross threading. The Panel stand-off with O-ring feature available on some listings, eliminates the need for behind-the-Panel Hardware, provides uniform Panel height, and provides a Panel to cover seal.

MPN: 5930-01-467-2384

Manufacturer: Honeywell

Micro Switch NT Series Toggle Switch, DPDT - 2 pole, 3 position (Momentary ON - OFF - Momentary ON), Quick Connect Terminal, Standard Lever. Completely sealed Switching chamber; NEMA 3, 3R, 4, and 13; UL recognized, File E12252, Vol. 1, Section 44; CSA certified, File LR4442; CE approved. Capable of withstanding a temperature of 160 degrees F continuously at full rated load. MICRO Switch NT Series toggle Switches meet the need for a rugged, cost-effective toggle Switch. Quality construction features include a seal between the toggle lever and bushing, and between the cover and case. These Switches can be used where Panels are subject to splashes, hosedowns, or outdoor environments. The "Easy-Start" threaded bushing enables quick alignment of mounting nut to decrease the chance of cross threading. The Panel stand-off with O-ring feature available on some listings, eliminates the need for behind-the-Panel Hardware, provides uniform Panel height, and provides a Panel to cover seal.

MPN: 5930-01-467-2463

Manufacturer: Honeywell

Enclosed Switch, SPDT (2), Top Plunger, 1 amp, 28 VDC, corrosion resistant steel Enclosure, Sealed per MIL-S-8805 symbol 4

MPN: 5930-01-471-3248

Manufacturer: Honeywell

XE Series Environmentally Sealed Basic Switch, Single Pole Double Throw Circuitry, 1 A at 28 Vdc, Pin Plunger Actuator, Leadwire Termination, Military Part Number MS27994-5.

MPN: 5930-01-479-5308

Manufacturer: Honeywell

Micro Switch NT Series Toggle Switch, DPDT - 2 pole, 2 position (Momentary ON - ON, Screw Terminal, Standard Lever, UL/CSA L192, IP67/IP68 sealed, thermoplastic case. MICRO Switch NT Series toggle Switches meet the need for a rugged, cost-effective toggle Switch. Quality construction features include a seal between the toggle lever and bushing, and between the cover and case. These Switches can be used where Panels are subject to splashes, hosedowns, or outdoor environments. The "Easy-Start" threaded bushing enables quick alignment of mounting nut to decrease the chance of cross threading. The Panel stand-off with O-ring feature available on some listings, eliminates the need for behind-the-Panel Hardware, provides uniform Panel height, and provides a Panel to cover seal.

MPN: 5930-01-482-4492

Manufacturer: Honeywell

Micro Switch TW Series Toggle Switch, DPDT - 2 pole, 2 position (Momentary ON - ON), IWTS termination, Locking Lever (F) - Locked in extreme position (opposite keyway). Ampere/Voltage Range (Resistive Load): 0.1 A to 5.0 A at 0.5 Vac to 115 Vac; 0.1 A to 5.0 A at 0.5 Vdc to 28 Vdc. UL/CSA L117: 5 A at 125 Vac

MPN: 5930-01-485-5102

Manufacturer: Honeywell