About this product Voltage Rating: 28 Volt, Amperage Rating: 200 A, Dimensions (L x W x H) 5 x 4.32 x 2.32 inch. * Manufacturer certifications are shipped with your order FREE of charge
Part Number or Model | 6041H215 |
Description | Relay |
Schedule B Class | 8536.49.0075 |
ECCN (Export Control Class) | EAR99 |
Terminal Type And Quantity | 4 pin all functions |
Unthreaded Mounting Hole Diameter | 0.120 inches nominal single mounting facility |
Overall Width | 1.875 inches nominal |
Overall Height | 3.281 inches nominal |
Overall Length | 2.750 inches nominal |
Operating Voltage Rating And Type At Specificationified Temp | 12 volts dc 25 degree celsius single winding |
Nonpile-up Main Contact Arrangement | 1 pole, single throw, normally open, momentary action |
Mounting Facility Pattern | In-line single mounting facility |
Mounting Facility Type And Quantity | 2 unthreaded hole single mounting facility |
Main Contact Maximum Voltage Rating In Volts | 115 ac and 28.0 dc |
Environmental Protection | Dustproof |
Main Contact Load Current Rating At Maximum Rated Voltage | 800 milliamperes ac resistive load and 6.0 amperes dc resistive load |
Duty Type | Continuous |
Coil Quantity | 1 |
Center To Center Distance Between Mounting Facilities Parallel T | 1.675 inches nominal single mounting facility |
Winding Quantity | 1 |
Relay
Operating Voltage Rating And Type At Specific Temp 28.0 volts dc 25 degrees celsius single winding
Special Purpose Relay, 200 amps, moisture sealed, SPST, Type 3*Note photo shown is representative of the 6041 family and is not exact photo of 6041H190.
Toggle, Miniature Positive Action, 5A @ 28 VDC, 3A @ 115 VAC 400 Hertz, 2A @ 115 VAC 60 Hertz Resistive Load,D.P.S.T. ON-NONE-OFF,Bushing Seal, Solder-Lug Terminals. MS90311-721. 8869K7X has bonded seal in bushing [meets 15' of water].
Circuit Breaker. Exceeds specification requirements for durability, vibration, mechanical shock,; and acceleration. 5 amps. This is a 700 series built in accordance with Boeing Co. Airplane Div Std BAC-C18G. The 700 is a miniature push-pull breaker offe
Environmentally Sealed Positive Action Toggle Switch, two pole, Momentary ON- NONE - OFF circuitry, Screw Terminals, 25A (resistive) at 28 VDC, 115 VAC and 400Hz; or 20A (resistive) at 115 VAC and 60Hz.
This item has been added to your cart!