Micro Switch TW Series Toggle Switch, SPST - 1 pole, 2 position (OFF-ON), Solder Terminal, Standard Lever, Military Part Number MS27718-22-1. Ampere/Voltage Range (Resistive Load): 0.1 A to 5.0 A at 0.5 Vdc to 28 Vdc; 0.1 A to 5.0 A at 0.5 Vac to 115 Vac. UL/CSA L117: 5 A at 125 Vac. Qualified to MIL-DTL-83731.
Manufacturer: HoneywellSealed Military Spec Pushbutton Switch. 10A, 3 Terminal normally open, Screw Terminals, Momentary, Black Button. MS25089-4A. Hardware included. Same as Otto P1-12422.
Manufacturer: OttoMicro Switch TW Series Toggle Switch, SPDT - 1 pole, 3 position (Momentary ON - OFF - ON), Solder Terminal, Standard Lever, Military Part Number MS27718-27-1. Ampere/Voltage Range (Resistive Load): 0.1 A to 5.0 A at 0.5 Vdc to 28 Vdc; 0.1 A to 5.0 A at 0.5 Vac to 115 Vac. UL/CSA L117: 5 A at 125 Vac. Qualified to MIL-DTL-83731.
Manufacturer: HoneywellSealed Military Spec Pushbutton Switch. 10A, 3 Terminal normally open, Screw Terminals, Momentary, Red Button. MS25089-4AR. Hardware included. Same as Otto P1-12421.
Manufacturer: OttoSealed Military Spec Pushbutton Switch. 10A, 3 Terminal normally open, Screw Terminals, Momentary, Red Button. MS25089-4AR. Hardware included. Same as Otto P1-12421.
Manufacturer: OttoMarine approved block type compact Temperature Switch; Pg11; 2m capilary length; 70-120 C.
Manufacturer: DanfossMicro Switch TW Series Toggle Switch, SPDT - 1 pole, 2 position (Momentary ON - ON), Solder Terminal, Standard Lever, Military Part Number MS27718-26-1. Ampere/Voltage Range (Resistive Load): 0.1 A to 5.0 A at 0.5 Vdc to 28 Vdc; 0.1 A to 5.0 A at 0.5 Vac to 115 Vac. UL/CSA L117: 5 A at 125 Vac. Qualified to MIL-DTL-83731.
Manufacturer: HoneywellSealed Military Spec Pushbutton Switch. 10A, 3 Terminal normally open, Screw Terminals, Momentary, Black Button. MS25089-4B. Hardware included. Same as Otto P1-22422.
Manufacturer: OttoMicro Switch SX Series Subminiature Basic Switch, Single Pole Double Throw (SPDT), 125 Vac, 1 A, Pin Plunger Actuator, Solder Termination.
Manufacturer: HoneywellSealed Military Spec Pushbutton Switch. 10A, 3 Terminal normally open, Screw Terminals, Momentary, Black Button. MS25089-4C. Hardware included. Same as Otto P1-32422.
Manufacturer: OttoMicro Switch SX Series Subminiature Basic Switch, Single Pole Double Throw (SPDT), 28 Vdc, 1 A, Pin Plunger Actuator, Solder Termination.
Manufacturer: HoneywellMil Grade MIL-PRF-8805/3 Momentary Action Pushbutton Switch, Sealed, Snap Action, Double Break. The P1 Switch offers vastly improved life under extreme. Conditions found in most military environments. This version has black button, is normally open 3 Terminals, has screw Terminals, low level Switching. Switching action momentary, 4lbs. Mil spec MS25089-4F. Hardware included. Same as Otto P1-62422.
Manufacturer: OttoMicro Switch SX Series Subminiature Basic Switch, Single Pole Double Throw (SPDT), 125 Vac, 1 A, Pin Plunger Actuator, Quick Connect Termination.
Manufacturer: HoneywellSealed Military Spec Pushbutton Switch. 10A, 3 Terminal normally open, Screw Terminals, Momentary, Black Button. MS25089-4G. Hardware included. Same as Otto P1-72422.
Manufacturer: AmphenolMicro Switch TL Series Sealed Toggle Switch, DPDT - 2 pole, 3 position (ON-OFF-ON), Solder Terminal, Standard Lever, Military Part Number MS27735-21. Ampere/Voltage Range (Resistive Load): 0.75 A at 115 Vdc; 0.5 A to 20 A at 0.5 Vdc to 28 Vdc; 0.5 A at 250 Vdc; 0.5 A to 15 A at 0.5 Vac to 277 Vac. UL/CSA L191: 15 A-125, 250, 277 Vac; 1/2 Hp-125 Vac; 1 Hp-250, 277 Vac; 5 A-120 Vac "L".
Manufacturer: HoneywellRugged and environmentally sealed pushbutton Switch. This sealed mil grade push button Switch features normally open circuitry with three Terminal (solder Terminals) as well as 4 lbs momentary Switching circuitry. Snap action Switches up to 10 amps. Like other MS25089 Switches, it offers long life in harsh environments. Black button. Same as Otto P1-82422.
Manufacturer: AmphenolMicro Switch TL Series Toggle Switch, 2 pole, 2 position, Solder Terminal, Standard Lever, Military Part Number MS27735-22.MICRO Switch TL Series toggle Switches are military qualified to MIL-DTL-3950, specifications for sealed toggle Switches. Quality construction features include a bonded seal between the toggle lever and bushing, and between the cover and case. The robust design of the TL Series toggle is well-suited for many military, aerospace and other demanding applications where reliability is essential. These applications include environments where the Panels are subjected to mechanical shock, vibration, and temperature extremes as well as environments with dust, splashing or hose-directed water.
Manufacturer: HoneywellSealed Military Spec Pushbutton Switch. 10A, 3 Terminal , normally closed circuit, Screw Terminals, Momentary, Red Button. Mil spec to MS25089-5AR. Hardware included. Same as Otto P1-12321.
Manufacturer: OttoMicro Switch TL Series Sealed Toggle Switch, Double Pole Double Throw (ON-ON), Turret Solder Lug Terminal, Standard Lever, Military Part Number MS27735-23. Ampere/Voltage Range (Resistive Load): 0.5 A to 15 A at 0.5 Vac to 277 Vac; 0.5 A at 250 Vdc; 0.5 A to 20 A at 0.5 Vdc to 28 Vdc; 0.75 A at 115 Vdc. UL/CSA L191: 15 A-125, 250, 277 Vac; 1/2 Hp-125 Vac; 1 Hp-250, 277 Vac; 5 A-120 Vac "L".
Manufacturer: HoneywellSealed Military Spec Pushbutton Switch. 10A, 3 Terminal normally closed, Screw Terminals, Momentary, Red Button. Hardware included. Same as Otto P1-32321.
Manufacturer: OttoSealed Military Spec Pushbutton Switch. 10A, 3 Terminal normally closed, Screw Terminals, Momentary, Red Button. Hardware included. Same as Otto P1-32321.
Manufacturer: OttoMicro Switch TW Series Toggle Switch, DPDT - 2 pole, 3 position (ON-OFF-ON), Solder Terminal, Standard Lever, Military Part Number MS27719-21-1. Ampere/Voltage Range (Resistive Load): 0.1 A to 5.0 A at 0.5 Vdc to 28 Vdc; 0.1 A to 5.0 A at 0.5 Vac to 115 Vac. UL/CSA L117: 5 A at 125 Vac. Qualified to MIL-DTL-83731.
Manufacturer: HoneywellMil spec sealed pushbutton Switch. Momentary Switching action 4 lbs. Screw Terminals, circuitry is normally closed. 3 Terminals. Same as Otto P1-72322.
Manufacturer: OttoMicro Switch TW Series Toggle Switch, DPDT - 2 pole, 3 position (Momentary ON - OFF - ON), Solder Terminal, Standard Lever, Military Part Number MS27753-38. Ampere/Voltage Range (Resistive Load): 0.1 A to 5.0 A at 0.5 Vdc to 28 Vdc; 0.1 A to 5.0 A at 0.5 Vac to 115 Vac. UL/CSA L117: 5 A at 125 Vac. Qualified to MIL-DTL-83731.
Manufacturer: HoneywellSubminiature basic Switch, double break, snap-action, military grade, .200 inches wide, has solder Terminals, 5 oz operating force, SPDT-DB, Form Z, and silver/gold high current contacts.
Manufacturer: OttoSubminiature basic Switch, double break, snap-action, military grade, .200 inches wide, has solder Terminals, 5 oz operating force, SPDT-DB, Form Z, and silver/gold high current contacts.
Manufacturer: OttoMicro Switch TW Series Toggle Switch, DPDT - 2 pole, 3 position (ON-ON-ON), Solder Terminal, Standard Lever (A) - Locked in three positions, Military Part Number MS27753-34. Ampere/Voltage Range (Resistive Load): 0.1 A to 5.0 A at 0.5 Vdc to 28 Vdc; 0.1 A to 5.0 A at 0.5 Vac to 115 Vac. UL/CSA L117: 5 A at 125 Vac.
Manufacturer: HoneywellSubminiature basic switch, double break, snap-action, military grade, .20 inches wide, has 1/8 inch long turret Terminals, 5 oz operating force, SPDT-DB, Form Z, and silver/gold high current contacts.
Manufacturer: OttoSubminiature basic switch, double break, snap-action, military grade, .20 inches wide, has 1/8 inch long turret Terminals, 5 oz operating force, SPDT-DB, Form Z, and silver/gold high current contacts.
Manufacturer: OttoMicro Switch TW Series Toggle Switch, DPDT - 2 pole, 3 position (ON-OFF-ON), Solder Terminal, Locking Lever (A) - Locked in three positions, Military Part Number MS27721-21-1A. Ampere/Voltage Range (Resistive Load): 0.1 A to 5.0 A at 0.5 Vdc to 28 Vdc; 0.1 A to 5.0 A at 0.5 Vac to 115 Vac. UL/CSA L117: 5 A at 125 Vac.
Manufacturer: HoneywellThe P1-10052 is a sealed push button Switch with 4 LBS. momentary action. Snap action mil grade, double break Switch plus this version is a 2 circuit pushbutton Switch. Solder Terminals. Gray button (picture shows black but Switch button is gray).
Manufacturer: OttoMicro Switch TW Series Toggle Switch, DPDT - 2 pole, 2 position (ON-ON), Solder Terminal, Standard Lever, Military Part Number MS27719-23-1. Ampere/Voltage Range (Resistive Load): 0.1 A to 5.0 A at 0.5 Vdc to 28 Vdc; 0.1 A to 5.0 A at 0.5 Vac to 115 Vac. UL/CSA L117: 5 A at 125 Vac.
Manufacturer: HoneywellSpecial Press-fit Switch, 10 amps (resistive)and 1050VRMS at 28VDC or 115VAC, gray thermoplastic button, SPDT, watertight per MIL-PRF-8805 design 3, temperature range -55 degress C to 85 degress C
Manufacturer: OttoMicro Switch TW Series Toggle Switch, DPDT - 2 pole, 2 position (ON-ON), Solder Terminal, Locking Lever (D) - Locked out of center position, Military Part Number MS27721-23-1D. Ampere/Voltage Range (Resistive Load): 0.1 A to 5.0 A at 0.5 Vdc to 28 Vdc; 0.1 A to 5.0 A at 0.5 Vac to 115 Vac. UL/CSA L117: 5 A at 125 Vac.
Manufacturer: HoneywellTemperature range between -55 C to + 85 C. 28 VDC or 115 VAC, 10 Amp. Dust tight. Per MIL-S-8805, design 2. Nylon grey button. Black and anodized aluminum alloy case. 2 circuits. Please see drawing for more information.
Manufacturer: OttoMicro Switch TW Series Toggle Switch, DPDT - 2 pole, 3 position (ON-ON-ON), Solder Terminal, Standard Lever, Military Part Number MS27719-31-1. Ampere/Voltage Range (Resistive Load): 0.1 A to 5.0 A at 0.5 Vdc to 28 Vdc; 0.1 A to 5.0 A at 0.5 Vac to 115 Vac. UL/CSA L117: 5 A at 125 Vac.
Manufacturer: HoneywellSealed pushbutton Switch. Momentary action, snap action with positive tactile feel. Normally open. Solder Terminals. Black body, red button. Rated at 10 amps.
Manufacturer: OttoMicro Switch TW Series Toggle Switch, DPDT - 2 pole, 3 position (Momentary ON - OFF - Momentary ON), Solder Terminal, Standard Lever, Military Part Number MS27719-27-1. Ampere/Voltage Range (Resistive Load): 0.1 A to 5.0 A at 0.5 Vdc to 28 Vdc; 0.1 A to 5.0 A at 0.5 Vac to 115 Vac. UL/CSA L117: 5 A at 125 Vac.
Manufacturer: HoneywellSealed rugged pushbutton Switch. Positive tactile feel. 10 amp. Solder Terminals. Normally open. Black button. Water tight.
Manufacturer: OttoMicro Switch TW Series Toggle Switch, DPDT - 2 pole, 3 position (Momentary ON - ON - Momentary ON), Solder Terminal, Locking Lever (N) - Locked out of extreme position (opposite keyway), Military Part Number MS27719-27-1. Ampere/Voltage Range (Resistive Load): 0.1 A to 5.0 A at 0.5 Vdc to 28 Vdc; 0.1 A to 5.0 A at 0.5 Vac to 115 Vac. UL/CSA L117: 5 A at 125 Vac.
Manufacturer: HoneywellSealed pushbutton Switch, 2 circuit, watertight seal, momentary snap action, black.
Manufacturer: OttoMicro Switch TW Series Toggle Switch, DPDT - 2 pole, 3 position (Momentary ON - ON - Momentary ON), Solder Terminal, Standard Lever. Ampere/Voltage Range (Resistive Load): 0.1 A to 5.0 A at 0.5 Vdc to 28 Vdc; 0.1 A to 5.0 A at 0.5 Vac to 115 Vac. UL/CSA L117: 5 A at 125 Vac.
Manufacturer: HoneywellPushbutton Switch, style B, sealed military grade pushbutton Switch. Screw Terminals, normal open circuitry, 2.5LBS momentary action, black button.
Manufacturer: OttoAircraft replacement enclosed Switch, 2X SPDT, 4 Amps (resistive) at 28VDC. See drawing for specs.
Manufacturer: HoneywellMomentary sealed, snap action, double break pushbutton Switch. The P1 offers a mechanical life that is well beyond the 50,000 cycles required by MIL-PRF-8805. The double break Switching mechanism has an incredibly fast transfer time, reducing arcing and increasing contact life. The inherent wiping action breaks welds and scrubs the contacts clean on every actuation. The P1 Switch offers vastly improved life under extreme conditions found in most military environments. This version is a special Single pole, normally open double break, .50 tall gray button, black alum case, dust tight design 2. See PDF.
Manufacturer: OttoEnclosed aircraft replacement Switch, 2X SPDT, 4 amps (resistive) at 28VDC, sealed per MIL-PRF-8805. See drawing for specs.
Manufacturer: HoneywellRugged, watertight pushbutton Switch per MIL-STD-810, 15/32 thread. SPST, Normally open, double break. Red Button, black anodized case.
Manufacturer: OttoSpecial aircraft environmentally sealed limit Switch with Lead wire termination, see attached PDF.
Manufacturer: HoneywellPushbutton Switch - special case, .38 inch red button, 10A resistive at 28VDC or 115VAC, watertight per MIL-PRF-8805, Design 3, Temperature range -55 degrees C to +65 degrees C.
Manufacturer: OttoEnclosed Switch, SPDT (2), Top Plunger, 1 amp, 28 VDC, corrosion resistant steel Enclosure, Sealed per MIL-S-8805 symbol 4
Manufacturer: HoneywellSpecial pushbutton Switch with knurled shroud. P1 series are sealed, Mil Grade MIL-PRF-8805/3 Momentary Action, Snap Action, Double Break. See attached PDF.
Manufacturer: OttoSpecial aircraft environmentally sealed limit Switch, SPDT (2), 1A (resistive) at 28 VDC
Manufacturer: HoneywellSealed push button Switch, normally open, 2.5 lbs operating force, normally open , positive tactile feedback, red button, solder Terminals. Makes and breaks every time! Less than 25 milliohms contact resistance because the OTTO design features inherent rocking action that breaks welds and wipes contacts clean. The P3-71111 is the commercial version of the P1 Pushbutton Switch, offering vastly improved life under extreme conditions found in some industrial environments. The pushbutton is sealed by a silicone boot operating on our patented rolling sleeve, providing longer life and smoother operation over a wide temperature range.
Manufacturer: OttoEnclosed Switch, SPDT, Top Plunger, 4 amps, 28 VDC, corrosion resistant steel Enclosure, Sealed per MIL-PRF-8805 symbol 4
Manufacturer: HoneywellPushbutton Switch. This is a sealed, SPDT, 2 Circuit, black button, shrouded black anodized case with drain hole.
Manufacturer: OttoHermetically sealed limit Switch with Bottom Receptacle termination, Plunger actuation, 2NC 2NO DPDT Snap Action Circuitry, 5 A (Resistive) ampere rating at 28 Vdc, Military Part Number M8805/80-01; No Lever.
Manufacturer: HoneywellRugged sealed pushbutton Switch with horn symbol. SPST Normally Open, Yellow & Black Horn Legend, Water tight to IP68S, faston Terminals.
Manufacturer: OttoHM Series Hermetically Sealed Basic Switch, Single Pole Double Throw Circuitry, 5 A at 28 Vdc, Integral Lever Actuator, Solder Termination.
Manufacturer: HoneywellPushbutton Switch. Double pole double throw double break. Splash and Dusttight Sealed, 2 Pole, 4 Circuit. Operating Force: 4.0 lbs. +/- 1.0 lb. Circuit: DPDT 4 circuit. Rating: 5 amps Resistive 3 amps, Inductive Contacts: Gold plate per MIL-PRF-8805/101-010, Button: Black nylon.
Manufacturer: OttoMicro Switch HS Series premium large basic Switches fulfill the need. The HS Series design incorporates a MIL-PRF-8805 symbol 5 hermetic seal to comply with hermetic seal requirements. HS Series Switches are capable of controlling logic level/low energy applications, as well as power-duty Switching to solve many applications. With a compact package size, HS Series Switches have overall dimensions of 1.96 inch length, 1.18 inch height, and 0.67 inch wide and are suitable for applications where space is limited. In addition to MIL-PRF-8805 qualified HS Series Switches, UL and CSA certified HS Series basic Switches are available for a wide variety of applications.
Manufacturer: HoneywellPushbutton Switch Momentary Action, Two Step DPDT-double break custom Pushbutton Switch -40 threads, black aluminum alloy case and button. Ring Panel seal, watertight Panel seal, all Hardware included.
Manufacturer: OttoMicro Switch Hermetically Sealed Basic Switch, SDPT circuitry, 25 Amps (resistive) at 28VDC, 1 amp (resistive) at 115VAC, 60Hz, .5 amps (resistive) at 120 VDC, CSA L277. See attached PDF/DRAWING.
Manufacturer: HoneywellP4 - Momentary Action, Two Step, Custom Pushbutton Turret Terminals, DPDT 6 Terminals, momentary Switching action, red button. Allow 8 weeks delivery if no stock is shown.
Manufacturer: OttoMicro Switch NT Series Toggle Switch, SPDT - 1 pole, 3 position (ON-OFF-ON), Screw Terminal, Standard Lever, UL/CSA L191, IP67/IP68 sealed, transportation grade toggle. Unassembled Hardware is included. MICRO Switch NT Series toggle Switches meet the need for a rugged, cost-effective toggle Switch. Quality construction features include a seal between the toggle lever and bushing, and between the cover and case. These Switches can be used where Panels are subject to splashes, hosedowns, or outdoor environments. The ""Easy-Start"" threaded bushing enables quick alignment of mounting nut to decrease the chance of cross threading. The Panel stand-off with O-ring feature available on some listings, eliminates the need for behind-the-Panel Hardware, provides uniform Panel height, and provides a Panel to cover seal.
Manufacturer: HoneywellP4 - Momentary Action, Two Step, Custom Pushbutton Switch, Turret Terminals, DPDT 8 Terminal circuitry, momentary Switching action, black bezel and black button.
Manufacturer: OttoMicro Switch NT Series Toggle Switch, SPDT - 1 pole, 3 position (Momentary ON - OFF - ON), Screw Terminal, Standard Lever, UL/CSA L192, IP67/IP68 sealed, transportation grade toggle. Unassembled Hardware is included. MICRO Switch NT Series toggle Switches meet the need for a rugged, cost-effective toggle Switch. Quality construction features include a seal between the toggle lever and bushing, and between the cover and case. These Switches can be used where Panels are subject to splashes, hosedowns, or outdoor environments. The ""Easy-Start"" threaded bushing enables quick alignment of mounting nut to decrease the chance of cross threading. The Panel stand-off with O-ring feature available on some listings, eliminates the need for behind-the-Panel Hardware, provides uniform Panel height, and provides a Panel to cover seal.
Manufacturer: HoneywellCustom momentary action 2 Step pushbutton Switch, DPDT, momentary action, red button, black base, sealed to IP64.
Manufacturer: OttoMicro Switch NT Series Toggle Switch, SPST - 1 pole, 2 position (Momentary ON - OFF), Screw Terminal, Standard Lever, UL/CSA L192, IP67/IP68 sealed, transportation grade toggle. Unassembled Hardware is included. MICRO Switch NT Series toggle Switches meet the need for a rugged, cost-effective toggle Switch. Quality construction features include a seal between the toggle lever and bushing, and between the cover and case. These Switches can be used where Panels are subject to splashes, hosedowns, or outdoor environments. The ""Easy-Start"" threaded bushing enables quick alignment of mounting nut to decrease the chance of cross threading. The Panel stand-off with O-ring feature available on some listings, eliminates the need for behind-the-Panel Hardware, provides uniform Panel height, and provides a Panel to cover seal.
Manufacturer: HoneywellMomentary Action, Two Step, Custom Pushbutton Switch. Turret Terminals, black bezel, and red button.
Manufacturer: OttoMicro Switch NT Series Toggle Switch, SPDT - 1 pole, 3 position (Momentary ON - OFF - ON), Screw Terminal, Standard Lever, UL/CSA L192, IP67/IP68 sealed, transportation grade toggle. MICRO Switch NT Series toggle Switches meet the need for a rugged, cost-effective toggle Switch. Quality construction features include a seal between the toggle lever and bushing, and between the cover and case. These Switches can be used where Panels are subject to splashes, hosedowns, or outdoor environments. The ""Easy-Start"" threaded bushing enables quick alignment of mounting nut to decrease the chance of cross threading. The Panel stand-off with O-ring feature available on some listings, eliminates the need for behind-the-Panel Hardware, provides uniform Panel height, and provides a Panel to cover seal.
Manufacturer: HoneywellRugged duty Sealed limit Switch. Double Pole Double Throw. Roller Actuator. 72"" lead wire. MS27240-3 per MIL-S-8805/43.
Manufacturer: OttoSE Series Environmentally Sealed Basic Switch, Single Pole Normally Open Circuitry, 5 A at 250 Vac, Pin Plunger Actuator, Leadwire Termination
Manufacturer: HoneywellSE Series Environmentally Sealed Basic Switch, Single Pole Normally Open Circuitry, 5 A at 250 Vac, Pin Plunger Actuator, Leadwire Termination
Manufacturer: HoneywellLimit Switch. P6-20018 except molded rubber exit header. It is 4PDT, stainless steel housing, 22AWG wire leads.
Manufacturer: OttoLimit Switch, SPST, 7 amps (resistive) @ 28VDC/115VAC, Qualified per MIL-PRF-8805/4, stainless steel housing and plunger.
Manufacturer: OttoMicro Switch Environmentally Sealed Basic Switch, SPDT, snap action, corrosion resistant steel plunger, gold contacts, 1 amp (resistive) at 30VDC.
Manufacturer: HoneywellMomentary action, military spec (M8805/110-1561), sealed sub-subminiature push button snap-action Switch. The P7 series incorporates OTTO's patented double break design in a significantly smaller package. These subminiature Switches embrace today's technology requirements by allowing for a large number of Switches to fit within a faceplate. The long life snap-action design is protected from the environment by a silicon rubber boot. This version offers a short body, is watertight, has solder Terminals, has 2 circuit low level Switching, a black bezel and red button.
Manufacturer: OttoMicro Switch SX Series Subminiature Basic Switch, Single Pole Double Throw (SPDT), 250 Vac, 7 A, Pin Plunger Actuator, Quick Connect Termination. Micro Switch SX Series subminiature basic Switches are used for simple or precision on/off application needs. They are small, precision snap-action Switches that are ideal where savings in space and weight are important.
Manufacturer: HoneywellPushbutton Switch, sealed against dust & moisture The P7 series incorporates OTTO's patented double break design in a significantly smaller package than the P1 series. These subminiature Switches embrace today's technology requirements by allowing for a large number of Switches to fit within a faceplate. The long life snap-action design is protected from the environment by a silicon rubber boot, operating on a patented rolling sleeve principle that gives long sealed life. This version is a military grade momentary action, normally open, 2 circuit Switch with a black body and button. Solder Terminals.
Manufacturer: OttoMicro Switch TL Series Sealed Toggle Switch, Single Pole Double Throw (SPDT) 3 Position (On - Off - On), Screw Terminals, Standard Lever, Military Part Number MS24523-21. Ampere/Voltage Range (Resistive Load): 0.5 A to 20 A at 0.5 Vdc to 28 Vdc; 0.5 A to 15 A at 0.5 Vac to 277 Vac; 0.5 A at 250 Vdc; 0.75 A at 115 Vdc. UL/CSA L191: 15 A-125, 250, 277 Vac; 1/2 Hp-125 Vac; 1 Hp-250, 277 Vac; 5 A-120 Vac "L".
Manufacturer: HoneywellMicro Switch TL Series Sealed Toggle Switch, Single Pole Double Throw (SPDT) 3 Position (On - Off - On), Screw Terminals, Standard Lever, Military Part Number MS24523-21. Ampere/Voltage Range (Resistive Load): 0.5 A to 20 A at 0.5 Vdc to 28 Vdc; 0.5 A to 15 A at 0.5 Vac to 277 Vac; 0.5 A at 250 Vdc; 0.75 A at 115 Vdc. UL/CSA L191: 15 A-125, 250, 277 Vac; 1/2 Hp-125 Vac; 1 Hp-250, 277 Vac; 5 A-120 Vac "L".
Manufacturer: HoneywellMicro Switch TL Series Sealed Toggle Switch, Single Pole Double Throw (SPDT) 3 Position (On - Off - On), Screw Terminals, Standard Lever, Military Part Number MS24523-21. Ampere/Voltage Range (Resistive Load): 0.5 A to 20 A at 0.5 Vdc to 28 Vdc; 0.5 A to 15 A at 0.5 Vac to 277 Vac; 0.5 A at 250 Vdc; 0.75 A at 115 Vdc. UL/CSA L191: 15 A-125, 250, 277 Vac; 1/2 Hp-125 Vac; 1 Hp-250, 277 Vac; 5 A-120 Vac "L".
Manufacturer: HoneywellSubminiature mil spec push button Switch. Solder Terminals, 2 circuit momentary. Sealed with black case and gray pushbutton.
Manufacturer: OttoMicro Switch TL Series Sealed Toggle Switch, Single Pole Double Throw (SPDT) 3 Position (On - Off - On), Screw Terminals, Locking Lever (A - Locked In Three Positions), Military Part Number MS24658-21A. Ampere/Voltage Range (Resistive Load): 0.5 A to 20 A at 0.5 Vdc to 28 Vdc; 0.5 A to 15 A at 0.5 Vac to 277 Vac; 0.5 A at 250 Vdc; 0.75 A at 115 Vdc. UL/CSA L191: 15 A-125, 250, 277 Vac; 1/2 Hp-125 Vac; 1 Hp-250, 277 Vac; 5 A-120 Vac "L".
Manufacturer: HoneywellThis item has been added to your cart!