Toggle, Miniature Positive Action, 5A @ 28 VDC, 3A @ 115 VAC 400 Hertz, 2A @ 115 VAC 60 Hertz Resistive Load,D.P.S.T. ON-NONE-OFF,Bushing Seal, Solder-Lug Terminals. MS90311-721. 8869K7X has bonded seal in bushing [meets 15' of water].
Manufacturer: SafranMicro Switch BZ Series Premium Large Basic Switch, Single Pole Double Throw Circuitry, 15 A at 125 Vac, High Overtravel Cross Roller Plunger Actuator, 2,5 N - 3,61 N [9 oz - 13 oz] Operating Force, Silver Contacts, Screw Termination, CE, CSA, DEMKO,.
Manufacturer: HoneywellMicrophone Pushbutton Foot Operated Switch, 25A @ 28 VDC, 15A @ 115 VAC 60 or 400 Hertz, Resistive Load, 1.P.S.T. OFF-Momentary ON, Flush Mounting Screw Terminals. Longer button-see spec sheet/pdf here. Terminal Hardware included.
Manufacturer: SafranMicro Switch BZ Series Premium Large Basic Switch, Single Pole Double Throw Circuitry, 15 A at 115 Vac, Overtravel Plunger Actuator, Screw Termination, Silver Contacts, Military Part Number M8805/1-020.
Manufacturer: HoneywellMil spec sub-miniature pushbutton Switch, 7A & 28 VDC & 125 VAC,S.P.S.T.-N.O. Momentary, Dust Sealed, Black Button & Case, Solder-Lug Terminals. BW9001BB is mil spec to M8805/96-014 and same as Eaton BW9001B except it has a black case. Special price for Inventory on hand only!
Manufacturer: SafranSpecial Large Basic Switch, SPDT, pin plunger actuation, 5 amps at 250VAC, screw termination, sealed construction and low temperature performance to minus 40 degrees F.
Manufacturer: HoneywellSwitch. Pushbutton Switch Alternate Action,Push to make-Push to break,2.5A @ 28 VDC,Resistive Load,S.P.S.T.,Unsealed,Clear Bezel,Gray Button,Screw Terminals
Manufacturer: Safran2 circuit Alternate Action Moisture Proof Pushbutton Switch, snap action contacts. See pdf. Red button. Note-we will show no stock because we build them here from sub-components-allow 10 days for delivery but they are NCNR. Photo shows gray but actual button is red! Assembly items that are in stock need at least 24 hours to process prior to shipping.
Manufacturer: SafranEnclosed Switch- Top Roller Arm Actuator, Adjustable with Steel Roller; 2NC 2NO DPDT Snap Action; Actuator Position - Left. Up to 20 ampere capacity. Cast aluminum housing with three-hole mounting. UL recognized, file #E12252.
Manufacturer: HoneywellEnclosed Switch. JS-200 is sealed per MIL-PRF-8805.
Manufacturer: HoneywellMicro Switch Series HDLS Stainless Steel Non Plug-in: Top Roller Plunger; 1NC 1NO Single-Pole, Double-Throw, Snap-Action, Double-Break; 0.75 in - 14NPT conduit.
Manufacturer: HoneywellMicro Switch Basic Switch, SPDT, with metric mount holes. V3-19 and V3-19M are the same Switch except that the V3-19M has metric mounting holes. - see spec sheet
Manufacturer: HoneywellMicro Switch V7 Series Miniature Basic Switch, Single Pole Double Throw Circuitry, 15 A at 277 Vac, Roller Lever Actuator, 1,72 N [6.2 oz] Maximum Operating Force, Silver Contacts, Quick Connect Termination; High Temperature.
Manufacturer: HoneywellMicro Switch V7 Series Miniature Basic Switch, Single Pole Double Throw Circuitry, 11 A at 277 Vac, Roller Lever Actuator, 2,78 N [10.0 oz] Maximum Operating Force, Silver Contacts, Quick Connect Termination.
Manufacturer: Honeywell300 amp rugged environmentally sealed contactor/ Relay, 12V coil, side-mount.
Manufacturer: KisslingPlunger Switch w/ wheel tip, SPDT 7A, high shock & vibration resistance, fully sealed.
Manufacturer: KisslingRotary Switch. 3 pole 5 positions 1 deck. 1-17/32" diameter. Non-shorting Rotary Switch. Open Frame. .531 inch diameter Switch. Double-wiping, self-cleaning, silver-plated brass contacts. Phenolic insulation. Unique protective coating guards against tarnish and corrosion, extends shelf life.
Manufacturer: ElectroSwitchMiniature lever locking toggle Switch, very similar to 7103K12ZQE, SPDT, on-off-on circuitry, rated at 6 amps, 125VAC, solder Terminals, -40 threaded bushing with neck Hardware included. Specially priced for this lot!
Manufacturer: ElectroSwitchMiniature toggle Switch w/ locking lever, SPST, On-None-On circuitry, Solder Lug Terminals. Very similar to 7101K1ZQ and 7101K1ZQE. Neck Hardware is included.
Manufacturer: ElectroSwitchSPDT ON-NONE-ON mini toggle Switch with .41 bat toggle Handle. Splash proof with bushing seal. Gold/nickel/silver Terminals. Specially priced for this lot!
Manufacturer: ElectroSwitchMiniature toggle Switch, SPDT, On-none-On, Panel mount, solder Terminals with silver contacts. -40 threaded bushing. Rated 6 amps at 125VAC. Formerly JMT-123. Bat Handle Actuator, epoxy Terminal seal. Same as A123S1YZQE. Very similar/cross to 7101SYZQ, 7101SYZQE, MST-105D.
Manufacturer: ElectroSwitchHeavy Duty toggle Switch with two 8 inch leads, SPST On-Off, PVC-coated, o-ring seal, fits Panels up to 3/16 in. thick, Standard Handle, Universal applictaion, 25 A at 12 V DC; 15 A at 24 V DC; 10 A at 36 V DC In the Switches context, UNIVERSAL equates to multi-purpose, rather than some of our specialized Switches which are generally used for one purpose. applicationIn Engineering, an application refers to a specific use for a device. For example, a Cole Hersee brand LVD finds an application in police cruisers (as well as many other uses). Silver contacts. A pair of devices that touch or come apart at the point where the Switch throw makes or breaks the circuit. Silver contacts are common because of their low conductivity and low electrical resistance. Many Cole Hersee Switches have silver contacts. O ring seal. On-None-Off. Mounting stem is nickel-plated brass 15/32" thread. Rating is 25 amps at 12VDC. Plasticized PVC coated / dipped housing. Lead time 3 weeks if item is not in stock.
Manufacturer: LittelFuseRocker Switch, universal weather resistant, SPDT, On-Off-On Rated at 25A at 12V DC, 15A at 24V DC, sealed to IP66 for water resistance (high Pressure wash), three brass blade Terminals
Manufacturer: LittelFuseMiniature toggle, DPST On-Off-On, .410 Bat, .350 Threaded Bushing, Solder lug, Coin Silver Contacts. Lead time 3 weeks if item is not in stock.
Manufacturer: ElectroSwitchWater resistant Panel seal boot, fits 7274--2, 7277-2, 2TC2 , 2TC14 and other aircraft and mil spec Circuit Breakers with a 7/16" brushing. Circuit Breaker not included. Durable silicon overmolded seal.
Manufacturer: SensataMiniature toggle Switch, DPDT, On-none-On, Panel mount, solder Terminals with silver contacts. -40 threaded bushing. Rated 6 amps at 125VAC. Formerly JMT-223. Bat Handle Actuator, epoxy Terminal seal. Very similar/crosses to 7201SYZQ,7201SYZQE,MST-205N.
Manufacturer: ElectroSwitchElectrical windshield wiper Switch, electric Wiper Switch or use with Johnson Electric (formerly United Technologies) motors, black plastic Knob with metal insert and set screw, white imprint, plated steel case 1 3/8" (34.9mm) diameter, 3/8" (9.5mm) long, mounting stem 7/16" -28 thread, .38" (9.6mm) long, 5 blade Terminals, Internal 6A Circuit Breaker at 12V DC.
Manufacturer: LittelFuseSealed rocker Switch, DPST, Momentary On - Off - Mometary On, rocker Switch rated at 20A @ 12V, .250 quick connect tab Terminals, standard black bracket, black rocker, no Lamp or Lens. The L-Series snap-in rocker Switches offer countless unique options including choices for ratings, colors, illuminations and laser etched legends. These single or double pole Switches feature a broad choice of Actuator styles, colors, and Lenses. Neatly proportioned, the L-Series rocker Switch fits into industry standard mounting holes of 1/734' x .867 & and 44.0mm x 22.0mm. Twelve Terminals offer an extensive range of Switch and Lamp circuit options, including LED or incandescent illumination. An optional Plug-in Terminal Connector enables pre-wiring of wire harness.The L-Series Switches, with sealed front Panel components, are IP67 certified, and able to withstand temperatures from -40 C to +85 C. These Switches are vibration, shock, thermoshock, moisture and salt spray resistant.
Manufacturer: Carling TechnologiesMiniature pushbutton Switch; On-None-On; 1 pole; 5 Amp,Solder Lug,Coin Silver Contacts.
Manufacturer: ElectroSwitchElectrical windshield wiper Switch, 12V or 24V DC, for two motors, For use with motors with dynamic parking, including Robert Bosch and Sprague Devices motors, Sealed construction, including O-ring on the shaft, Black plastic Knob with metal insert and set screw, white imprint, Mounting stem 7/16" -28 thread, .45" (11.4mm) long, Diecast case 1 5/8" (41.3mm) diameter, 8 blade Terminals.
Manufacturer: LittelFuseVisi-rocker Switch, single pole, Off-None-On, .250 quick connect tabs Terminals, black gloss visi-rocker (2 colors), with black matte bezel, hot stamp, visi-red rocker The R-Series Curvette single pole rocker Switches are aesthetically pleasing miniature snap-in Switches. Due to the patented mounting ear design, they are compatible with a wide range of standard Panel cutouts. Options include a range of momentary and maintained single or double throw circuits, various terminations, and legend options, as well as a variety of rocker colors and styles, including our unique curved two-color molded Visi-Rocker for low cost "ON" indication.
Manufacturer: Carling TechnologiesEncoder, sealed,22.5, binary, 1 deck, 16 positions, adjustable stops.
Manufacturer: GrayhillSpecial purpose PushButton Start Switch, SPST, 35A at 12V, 20A at 24V DC. Two screw Terminals with lockwashers. Mounting stem 7.8""-24 thread, keyed to prevent Switch from turning, fits Panels 0.04" - 0.10" thick (1.0 - 2.5mm). Silver contacts. Button is engraved "Engine Start". Impact-resistant molded plastic button with imprint, white on color, repels oil, water and other liquids. Diecast housing, with knurled aluminum facenut. 2.2"L overall, 1.1" case diameter (56.1 and 28.5mm). With special facenut with built-in lip seal for added weather-resistance. Same as 90047-01 BX.
Manufacturer: LittelFuseV-series Contura style Switch, single pole, On-None-Off, rated 20A @ 12V, 8 Terminal base style - .250 quick connect tab termination with no barriers, sealed, 12V incandescent Lamp, black bracket, no Lens, no Actuator. The V-Series Switches are well known for their cutting edge design, high quality, maximum performance and unmatched reliability. These snap-in rocker Switches offer countless options for ratings, circuits, colors, illuminations and symbols. These single or double pole Switches feature removable Actuators in a choice of Actuator styles and colors, which may be purchased and stocked separately. An optional Plug-in Terminal Connector enables pre-wiring of wire harness. Certified to IP66, the V-Series Contura Switches offer complete protection against dust, prolonged spray and submersion under Pressure and are recognized to UL1500 - Ignition Protection for Marine Products. These Switches are vibration, shock, thermoshock, moisture and salt spray resistant with operating temperature ranging from -40 C to 85 C. The Contura II & III styles feature square and bar Lens options and are constructed of thermoplastic polycarbonate with hard nylon or soft touch elastomer overlay. The Contura II features 2 rows of raised bumps and the Contura III features 3 rows of ridged finger traction on top and bottom of the rocker.
Manufacturer: Carling TechnologiesIgnition Switch, sealed keySwitch, 10A at 12V, 5A at 24V, 3A at 36V and 2A at 48V DC. three positions: Accessory - Ignition/Accessory - Start. Spring return to off. with anti restart, no key boot Constructed from engineering thermoplastic and is fully sealed using O-rings and ultrasonic welding to protect Switch to IP67 (with Connector installed), Accepts Deutsch-type Connector, Plastic facenut and nickel-plated brass backing nut, Supplied with two matching keys with protective key boot.
Manufacturer: LittelFuse30 amp overload Sensor. Klixon 7235 and 7236 overload sensing controls are designed for the remote sensing of overloads in aircraft electrical systems or other appliCable remote systems. They are for the protection of 28 VDC circuits or for 120 VAC single phase or three phase circuits operating at 60 to 1000 Hz. For three phase AC circuit protection, a 28 VDC control circuit is required. One three phase Relay or three single phase Relays with their coils wired in series may be used in the control circuit. With either arrangement, all three phases will trip open simultaneously when an overload exists in any one phase. See attached spec sheet.
Manufacturer: SensataOutput Module, DIN Rail Mount 17.5mm, 280VAC/5A, 4-32VDC In, Zero Cross
Manufacturer: Crydom5TB6 style Thermostat, hermetically sealed, SPST, with Open Temperature of 135 +/-6F, and a Close Temperature of 40 +/-8F. The Klixon 5BT series Thermostat is a high reliability, hermetically sealed thermal Switch. The single pole, double throw design allows versatility and economy in providing two functions within the same device. Typically these Klixon Switches are used to control and indicate at a preset temperature. One pole can control a cooling fan and the other pole can indicate impending danger.
Manufacturer: SensataSingle deck Rotary Switch. Series 56, 0.5" diameter, 200mA, .355" behind Panel. Requires minimum distance behind the Panel, adjustable stop types, see pdf for more information.
Manufacturer: GrayhillSwitch Hardware. Flush hole to prevent crimping. See pdf for more information.
Manufacturer: Grayhill76 series DIP Switch, 8 position SPST rocker. Sealed base standard. Spring and ball contact. Top tape seal option. See pdf for more information.
Manufacturer: Grayhill76 series DIP Switch, 4 position SPST rocker. Sealed base standard. Spring and ball contact. See specifications for more information.
Manufacturer: Grayhill76 series DIP Switch, 8 position SPST rocker. Sealed base standard. See pdf specifications for additional information.
Manufacturer: Grayhill78 series DIP Switch, 4 position SPST, raised slide. Sealed base standard. Spring and ball contact.
Manufacturer: GrayhillSwitch roller lever Assembly, Actuator Switch.
Manufacturer: HoneywellAuxiliary Actuator for Environment-sealed basic Switch, roller lever
Manufacturer: HoneywellAuxiliary Switch Actuator, Corrosion resistant steel leaf lever
Manufacturer: HoneywellMicro Switch Straight lever Auxiliary Actuator for SX series Switches
Manufacturer: HoneywellActuator for use with many micro Switches-refer to pdf.
Manufacturer: HoneywellRotary Switch, 3 position, double pole, Maintained-Maintained-Maintained circuitry, standard rating without Terminal barriers, with Connector keying pin, black plactic Knob, IP68S sealed, snap-in Panel mounting. No LED light source.
Manufacturer: OttoToggle Switch Guard. Spring loaded cover locks in up or down position. Red molded front cover. Black painted steel bracket. Military qualified but used on many commercial applications as well. Switch not included.
Manufacturer: Otto5000 series Pressure Switch with standard Terminals, Factory set at 60 PSI, Normally Open (N.O), single circuit - 2 Terminals.
Manufacturer: HoneywellTransducer with pushbutton. The Otto Transducer takes a force input of up to 3 lbs. and converts it into a linear voltage output on an X and Y axis. Button is made of black delrin. Case is black, anodized aluminum. 1,000,000 cycle mechanical / electrical life. Pull off force is 15 pounds, actuation force is 2.75 pounds. Please refer to specifications for additional information.
Manufacturer: OttoAviation grade Proximity Sensor, 100FW series, Shielded 3-wire DC Sinking (NPN), N.O. proximity Sensor, 0.625 in cylindrical housing , 20 ga, MIL-W-16878/4 wire. Nominal sensing distance of 2,41 mm 0,51 mm [.09 in .02 in ].
Manufacturer: HoneywellBlack Rugged Sealed 16 amp Rocker Switch, Momentary on -none-off SPST, No Light, No Legend.
Manufacturer: OttoUnshielded 3-wire DC Sinking (NPN), N.O. proximity Sensor, 0.625 in cylindrical housing , 20 ga, MIL-W-16878/4 wire. Nominal sensing distance of 5,84 mm 0,76 mm [.23 in .03 in ].
Manufacturer: HoneywellPush button Switch. Sub miniature. Long life. 5 amp sealed momentary snap action Mil Spec with positive tactile feedback. Same as part # P7-331222.
Manufacturer: OttoPush button Switch. Sub miniature. Long life. 5 amp sealed momentary snap action Mil Spec with positive tactile feedback. Same as part # P7-531122.
Manufacturer: OttoMicro Switch TL Series Toggle Switch, SPST - 1 pole, 2 position (OFF-ON), IWTS (14-16 Gage) Terminal, Standard Lever, bushing 15/32 inch, Military Part Number MS27722-22. Amp/voltage range: 0.5 A to 15 A at 0.5 Vac to 277 Vac; 0.5 A to 20 A at 0.5 Vdc to 28 Vdc; 0.5 A at 250 Vdc; 0.75 A at 115 Vdc. UL/CSA: L191: 15 A-125, 250, 277 Vac; 1/2 Hp-125 Vac; 1 Hp-250, 277 Vac; 5 A-120 Vac "L".
Manufacturer: HoneywellMicro Switch TL Series Toggle Switch, SPDT - 1 pole, 2 position (ON-ON), IWTS (16-20 Gage) Terminal, Locking Lever F- locked in extreme position (opposite keyway), Military Part Number MS27787-23F. Ampere/Voltage range (resistive load): 0.75 A at 115 Vdc; 0.5 A at 250 Vdc; 0.5 A to 7.5 A at 0.5 Vdc to 28 Vdc; 0.5 A to 6 A at 0.5 Vac to 230 Vac. UL/CSA: L191: 15 A-125, 250, 277 Vac; 1/2 Hp-125 Vac; 1 Hp-250, 277 Vac; 5 A-120 Vac "L"
Manufacturer: HoneywellMicro Switch is qualified to MIL-DTL-3950, specification for sealed toggle Switches. It is a 1 Pole 1 position, SPST toggle Switch with Internal wiring (IWTS) 16-20 awg. The robust design of the 101TL2-6 toggle is well-suited for many military, aerospace and other demanding applications. These applications include environments where the Panels are subjected to mechanical shock, vibration, and temperature extremes as well as environments with dust, splashing or hose-directed water.101TL2-6, MS27784-30 is UL recognized, CSA certified, and CE approved for global use. If no stock please allow 30 days for delivery.
Manufacturer: HoneywellControls mil grade pushbutton snap action Switch for low level Switching. Sealed with momentary action, normally open. 4 LBS momentary Switch action. Screw Terminals. Black body & button. Hardware is included. Mil qualified to MS25089-1CL. Same as Otto P1-34122.
Manufacturer:Micro Switch TL Series Toggle Switch, DPDT - 2 pole, 3 position (Momentary ON - OFF - ON), IWTS (16-20 Gage) Terminal, Standard Lever, Military Part Number MS27785-1. Ampere/Voltage Range (Resistive Load): 0.75 A at 115 Vdc; 0.5 A at 250 Vdc; 0.5 A to 15 A at 0.5 Vac to 277 Vac; 0.5 A to 20 A at 0.5 Vdc to 28 Vdc. UL/CSA: L191: 15 A-125, 250, 277 Vac; 1/2 Hp-125 Vac; 1 Hp-250, 277 Vac; 5 A-120 Vac d"L".
Manufacturer: HoneywellMicro Switch TL Series Toggle Switch, DPST - 2 pole, 2 position (OFF-ON), IWTS (16-20 Gage) Terminal, Standard Lever, Military Part Number MS27785-22. Ampere/Voltage Range (Resistive Load): 0.75 A at 115 Vdc; 0.5 A at 250 Vdc; 0.5 A to 6 A at 0.5 Vac to 230 Vac; 0.5 A to 7.5 A at 0.5 Vdc to 28 Vdc. UL/CSA: L191: 15 A-125, 250, 277 Vac; 1/2 Hp-125 Vac; 1 Hp-250, 277 Vac; 5 A-120 Vac "L"
Manufacturer: HoneywellSealed Military Spec Pushbutton Switch. 10A, normally open SPST, Screw Terminals, Momentary, Red Button. MS25089-1FR. Comes with mounting support nut. Same as Otto P1-62121
Manufacturer: OttoMicro Switch TL Series Toggle Switch, DPDT - 2 pole, 3 position (Momentary ON- OFF - Momentary ON), IWTS (16-20 Gage) Terminal, Locking Lever (E) - locked in center position, Military Part Number MS27788-27E. Ampere/Voltage Range (Resistive Load): 0.5 A at 250 Vdc; 0.5 A to 7.5 A at 0.5 Vdc to 28 Vdc; 0.5 A to 6 A at 0.5 Vac to 230 Vac; 0.75 A at 115 Vdc. UL/CSA L192: 10 A-125, 250, 277 Vac; 1/4 Hp-125 Vac; 1/2 Hp-250, 277 Vac; 3 A-125 Vac "L".
Manufacturer: HoneywellMicro Switch TL Series Toggle Switch, DPDT - 2 pole, 2 position (ON-ON), IWTS (16-20 Gage) Terminal, Special Design Lever - Lever with 0.064 diameter hole Ampere/Voltage Range (Resistive Load): 0.75 A at 115 Vdc; 0.5 A to 7.5 A at 0.5 Vdc to 28 Vdc; 0.5 A to 6 A at 0.5 Vac to 230 Vac; 0.5 A at 250 Vdc.
Manufacturer: HoneywellMicro Switch TW Series Toggle Switch, SPDT - 1 pole, 2 position (ON-ON), IWTS Terminal, Standard Lever. Ampere/Voltage Range (Resistive Load): 0.1 A to 5.0 A at 0.5 Vac to 115 Vac; 0.1 A to 5.0 A at 0.5 Vdc to 28 Vdc.
Manufacturer: HoneywellMicro Switch TW Series Toggle Switch, 1 pole, 2 position, locking lever with 15/32 bushing.Quality construction features include an available bonded seal between the toggle lever and bushing for those applications where a sealing-related failure cannot be tolerated. The durable design of the TW Series toggle is well-suited for many military, aerospace and other demanding applications where space behind the Panel is limited. TW toggles feature a miniature military-grade design with environmental sealing capabilities and can be configured with a large selection of circuitries, electrical terminations, lever and bushing designs, and contact material options to satisfy a diverse range of applications.
Manufacturer: HoneywellMicro Switch TW Series Toggle Switch, DPDT - 2 pole, 3 position (ON-OFF-ON), IWTS Terminal, Standard Lever. Ampere/Voltage Range (Resistive Load): 0.1 A to 5.0 A at 0.5 Vac to 115 Vac; 0.1 A to 5.0 A at 0.5 Vdc to 28 Vdc
Manufacturer: HoneywellSealed Military Spec Pushbutton Switch. 10A, normally closed, SPST, Screw Terminals, push pull maintained, Black Button. MS25089-2C-1. Hardware included. Same as Otto P1-32232
Manufacturer: OttoSealed Military Spec Pushbutton Switch. 10A, normally closed, SPST, Screw Terminals, push pull maintained, Black Button. MS25089-2C-1. Hardware included. Same as Otto P1-32232
Manufacturer: OttoMicro Switch TW Series Toggle Switch, DPST - 2 pole, 2 position (OFF-ON), IWTS Terminal, Standard Lever.
Manufacturer: HoneywellMicro Switch TW Series Toggle Switch, DPDT - 2 pole, 2 position (ON-ON), IWTS Terminal, fine silver contacts, Locking Lever (D) - Locked out of Center position. Ampere/Voltage Range (Resistive Load): 0.1 A to 5.0 A at 0.5 Vac to 115 Vac; 0.1 A to 5.0 A at 0.5 Vdc to 28 Vdc. UL/CSA L117: 5 A at 125 Vac MICRO Switch TW Series toggle Switches are military qualified to MIL-83731 specifications for sealed and unsealed toggle Switches. Quality construction features include an available bonded seal between the toggle lever and bushing for those applications where a sealing-related failure cannot be tolerated. The durable design of the TW Series toggle is well-suited for many military, aerospace and other demanding applications where space behind the Panel is limited. TW toggles feature a miniature military-grade design with environmental sealing capabilities and can be configured with a large selection of circuitries, electrical terminations, lever and bushing designs, and contact material options to satisfy a diverse range of applications.
Manufacturer: HoneywellMicro Switch TW Series Toggle Switch, DPDT - 2 pole, 2 position (Momentary ON - ON), IWTS termination, Locking Lever (F) - Locked in extreme position (opposite keyway). Ampere/Voltage Range (Resistive Load): 0.1 A to 5.0 A at 0.5 Vac to 115 Vac; 0.1 A to 5.0 A at 0.5 Vdc to 28 Vdc. UL/CSA L117: 5 A at 125 Vac
Manufacturer: HoneywellHM Series Hermetically Sealed Basic Switch, Single Pole Double Throw Circuitry, 3 A at 28 Vdc, Integral Lever Actuator, Solder Termination, Military Part Number MS27216-5.
Manufacturer: HoneywellThis item has been added to your cart!