Search Results (24)

Neoprene Rubber Duct CEET5

Neoprene rubber, rein, 1-1/4 inch

Manufacturer: Thermoid

Scraper Ring S33865-14H5

Ring: scraper,rubber,ethylene propylene

Manufacturer: Goodrich

Electrical Cable Nipple MS25171-1S
NSN: 5975-00-553-6995

Nipple: elec term, rubber silicone

Manufacturer:

Switch 5930-01-468-5473
NSN: 5930-01-468-5473

Limit Switch. P6-20018 except molded rubber exit header. It is 4PDT, stainless steel housing, 22AWG wire leads.

Manufacturer: Otto

Switch 5930-01-519-7052
NSN: 5930-01-519-7052

Momentary action, military spec (M8805/110-1561), sealed sub-subminiature push button snap-action Switch. The P7 series incorporates OTTO's patented double break design in a significantly smaller package. These subminiature Switches embrace today's technology requirements by allowing for a large number of Switches to fit within a faceplate. The long life snap-action design is protected from the environment by a silicon rubber boot. This version offers a short body, is watertight, has solder Terminals, has 2 circuit low level Switching, a black bezel and red button.

Manufacturer: Otto

Switch 5930-01-212-7288
NSN: 5930-01-212-7288

Pushbutton Switch, sealed against dust & moisture The P7 series incorporates OTTO's patented double break design in a significantly smaller package than the P1 series. These subminiature Switches embrace today's technology requirements by allowing for a large number of Switches to fit within a faceplate. The long life snap-action design is protected from the environment by a silicon rubber boot, operating on a patented rolling sleeve principle that gives long sealed life. This version is a military grade momentary action, normally open, 2 circuit Switch with a black body and button. Solder Terminals.

Manufacturer: Otto

Switch 5930-01-509-2251
NSN: 5930-01-509-2251

The P7 series subminiature Switches embrace today's technology requirements by allowing for a large number of Switches to fit within a faceplate or a small Panel space.The long life snap-action design offers low contact resistance (25 milliohms max initial) and is protected from the environment by a silicone rubber boot, operating on a rolling sleeve principle that gives long sealed life and smooth operation. The P7 series is designed to meet the requirements of MIL-PRF-8805 including low level Switching (10mA @ 30mV) with power Switching up to 5 amps at 28VDC as well.

Manufacturer: Otto

Switch 5930-01-276-2975
NSN: 5930-01-276-2975

Rugged Snap Action Pushbutton Switch. Normally Open. Dust tight. Internal silicon rubber boot seals out contaminants. Black.160 button. 5 amps@28vdc.Solder Terminals.

Manufacturer: Otto

Switch 5930-01-187-8796
NSN: 5930-01-187-8796

Pushbutton Switch, sealed against dust & moisture The P7 series incorporates OTTO's patented double break design in a significantly smaller package than the P1 series. These subminiature Switches embrace today's technology requirements by allowing for a large number of Switches to fit within a faceplate. The long life snap-action design is protected from the environment by a silicon rubber boot, operating on a patented rolling sleeve principle that gives long sealed life. This version is a military grade momentary action, normally open, 2 circuit Switch with a black body and gray guarded button. Solder Terminals.

Manufacturer: Otto

Switch 5930-01-433-9510
NSN: 5930-01-433-9510

Special Rugged Snap Action Mini Pushbutton Switch . Two circuit. Dust & moisture tight. Red .375 button. Silicon rubber seal gives long life and smooth operation. See PDF drawing here.

Manufacturer: Otto

Switch 5930-01-295-8496
NSN: 5930-01-295-8496

Special Rugged Snap Action Mini Pushbutton Switch. 2 circuit. Dust & moisture tight. Black .375 button. Silicon rubber seal gives long life and smooth operation. See PDF Drawing here.

Manufacturer: Otto

Med Pressure Hose 156-6
NSN: 4172-00-611-2548

Hose: med pressure,rubber, rein st,ref

Manufacturer: Unspecified

Removal Tool CA21038-4-T16
NSN: 5120-01-161-4608

Used to remove rubber grommets. CA21038-4-T16

Manufacturer: HOWMET AEROSPACE

Removal Tool CA21038-4-T16
NSN: 5120-01-161-4608

Used to remove rubber grommets. CA21038-4-T16

Manufacturer: HOWMET AEROSPACE

Removal Tool CA21038-4-T16
NSN: 5120-01-161-4608

Used to remove rubber grommets. CA21038-4-T16

Manufacturer: HOWMET AEROSPACE

Removal Tool CA21038-4-T16
NSN: 5120-01-161-4608

Used to remove rubber grommets. CA21038-4-T16

Manufacturer: HOWMET AEROSPACE

Circuit Breaker Boot 5925-01-094-8932
NSN: 5925-01-094-8932

Three pole Circuit Breaker sealing boot; clear silicone rubber; 6 ea. SEELSKREWS provided for mounting 6-32x3/8". HE-1050 is mil qualified to M5423/14-07. Backordered quantities will NOT be qualified to MIL-DTL-5423

Manufacturer: APM Hexseal

Switch Boot 5930-01-104-7338
NSN: 5930-01-104-7338

Circuit Breaker sealing Panel boot for a single pole Circuit Breaker, lever actuated, IP66/IP68 rated, clear silicone rubber; 2 #6-32 X 3/8 APM seelskrews provided for mounting.

Manufacturer: APM Hexseal

Switch Boot 5340-01-617-7215
NSN: 5340-01-617-7215

Toggle Switch Boot. The C1131/28 is a high quality commercial grade toggle Switch sealing boot made from black silicone rubber; The C1131/28 fits toggle Switches with a 15/32-32NS-2B bushing.

Manufacturer: APM Hexseal

Switch Boot 5340-00-007-7578
NSN: 5340-00-007-7578

Single pole Circuit Breaker sealing boot; clear silicone rubber; 2 SEELSKREWS provided for mounting 6-32x3/8".

Manufacturer: APM Hexseal

Switch Boot 5930-00-539-7013
NSN: 5930-00-539-7013

Half toggle (1/2) toggle Switch sealing boot with thread size, 15/32-32NS-2B, .155 - .240in toggle diamter. N1030-B is a military spec gray silicone rubber Switch Boot for 15/32 toggle Switches. It allows the toggle Actuator to protrude and is a fully sealed toggle Switch seal and is IP66/IP68 rated.

Manufacturer: APM Hexseal

Switch Boot 5342-01-271-4291
NSN: 5342-01-271-4291

Switch Boot. The N3030 is a gray pushbutton Switch Boot with nickel plated brass mounting nut. The boot is moulded from a high tear strength silicone rubber bonded to a built in mounting nut.The boot encloses the Switch bushing and forms a watertight and dust tight seal against the Panel surface.15/32-32NS-2B thread size.

Manufacturer: APM Hexseal

Switch Boot 4820-00-446-3358
NSN: 4820-00-446-3358

Rugged pushbutton Switch sealing boot made from gray silicone rubber, fits 1/4-40NS-2B Switch bushings.

Manufacturer: APM Hexseal

Switch Boot 5975-00-253-7163
NSN: 5975-00-253-7163

Pushbutton Switch sealing boot; gray silicone rubber; 1/2-32NS-2B

Manufacturer: APM Hexseal