About this product 50 amperes dc resistive load, moderately rugged. * Manufacturer certifications are shipped with your order FREE of charge
Part Number or Model | MS24166-D1 |
Description | Relay |
Schedule B Class | 8536.41.0065 |
ECCN (Export Control Class) | 9A991.d |
Unthreaded Mounting Hole Diameter | 0.219 inches nominal single mounting facility |
Winding Dc Resistance Rating | 94 ohms nominal single winding |
Winding Quantity | 1 |
Time Delay | 0.02 seconds maximum fixed operate time |
Time Delay | 0.01 seconds maximum fixed release time |
Storage Type | General purpose warehouse |
Terminal Type And Quantity | 4 threaded stud all functions |
Overall Height | 2.625 inches maximum |
Overall Length | 2.75 inches maximum |
Overall Width | 2.125 inches maximum |
Purpose For Which Designed | General |
Specification Data | 96906-ms24166 government standard |
Operating Voltage Rating And Type At Specificationified Temp | 28 volts dc 25 degree celsius single winding |
Nonpile-up Main Contact Arrangement | 1 pole, single throw, normally open, double make, momentary action |
Main Contact Load Current Rating At Maximum Rated Voltage | 50.0 amperes dc motor load |
Main Contact Load Current Rating At Maximum Rated Voltage | 50.0 amperes dc inductive load |
Main Contact Load Current Rating At Maximum Rated Voltage | 25.0 amperes dc lamp load |
Main Contact Load Current Rating At Maximum Rated Voltage | 50.0 amperes dc resistive load |
Main Contact Maximum Voltage Rating In Volts | 28 dc |
Mounting Facility Pattern | In-line single mounting facility |
Mounting Facility Type And Quantity | 2 unthreaded hole single mounting facility |
Fragility Factor | Moderately rugged |
Duty Type | Continuous |
Cubic Measure | 15.339 cubic inches |
Coil Quantity | 1 |
Case Material | Metal |
Center To Center Distance Between Mounting Facilities Parallel T | 2.188 inches nominal single mounting facility |
Arc Quenching Method | Air |
Relay
Moderately rugged power relay
1 pole, single throw, normally closed, momentary action single switch unit MS24523-29 Toggle Switch
Switch Guard, MIL-G-7703, One Hole Mount for 2 or 3 Position Switches, Closing guard does not effect toggle position, Phenolic Red Lever, Keyway Opp. Hinged end.*Note photo is for reference only- see new PDF as this toggle Switch Guard now has lever stop
Up position momentary and down position momentary and center position maintained
Uniform Panel Appearance Pushbutton Switches. Moisture proof. 2PDT 4 circuit may be jumper to 2PDT. See attached PDF for colors-Note-we can build these from stock even if store shows no stock-allow 1 week for delivery but they are NCNR. Assembly items tha
This item has been added to your cart!