About this product Switch Uniform Panel Appearance Pushbutton Switches. Moisture proof. 2PDT 4 circuit may be jumper to 2PDT. See attached PDF for colors-Note-we can build these from stock even if store shows no stock-allow 1 week for delivery but they are NCNR. * Manufacturer certifications are shipped with your order FREE of charge
Part Number or Model | 5930-00-465-7838 |
Description | Switch |
Schedule B Class | |
ECCN (Export Control Class) |
Switch
Environmentally sealed limit Switch with Leadwire termination, Plunger actuation, Four Pole Double Throw Circuitry, 7 A (Resistive) ampere rating at 28 Vdc.
Switch
Heavy Duty AC rated Toggle Switch, 3 pole, screw Terminals, On-None-On, bat Actuator, unsealed, 10A @ 250VAC, 3/4HP @ 125-250VAC; 1, 2 or 3 phase The H-Series three pole toggle Switches are heavy duty, high voltage AC rated Switches. They feature a
Switch
Enclosed aircraft replacement Switch, 2X SPDT, 4 amps (resistive) at 28VDC, sealed per MIL-PRF-8805. See drawing for specs.
Switch
Micro Switch TL Series Sealed Toggle Switch, Single Pole Double Throw (SPDT) 3 Position (On - Off - On), Screw Terminals, Locking Lever (A - Locked In Three Positions), Military Part Number MS24658-21A. Ampere/Voltage Range (Resistive Load): 0.5 A to 20 A
Switch
Environmentally Sealed Positive Action Toggle Switch, two pole, Momentary ON- NONE - OFF circuitry, Screw Terminals, 25A (resistive) at 28 VDC, 115 VAC and 400Hz; or 20A (resistive) at 115 VAC and 60Hz.
Switch
Toggle Switch, DPDT, Latched and momentary, 25A, 28VDC, Panel mount-threaded.
Aircraft mil spec Circuit Breaker. 7 /12 amps. MS25244 but ALTERNATE BASE & Terminal CONFIGURATION STYLE, A feature of the breaker is separate overload and mechanical latches. Separated in this way,the mechanical latch assures maximum endurance for the th
Very Rugged Flush Mounted Environmentally Sealed Positive Action Toggle Switch. High electrical/mechanical reliability. Non-teasible mechanism. Wiping action contacts. Positive make and break Action. Molded-in Terminal numbers. Three hole design for flush
Switch Guard,MIL-G-7703 & MS24417-1,One Hole Mount for 2 or 3 Position Switches. 8492k1 insertion of pin (not provided) through guard prevents accidental operation, Black Metal Lever, Keyway Opp. Pin Hole. Specially priced for this lot of only!
1.P.S.T. - N.O. 400 Amperes @ 28 VDC, Continuous Duty, Gasketed, Top Mounting, MIL-DTL-6106 & MS24185-D1 Approved.
This item has been added to your cart!