Products Catalog
Electrical

Pushbutton Switch, sealed against dust & moisture The P7 series incorporates OTTO's patented double break design in a significantly smaller package than the P1 series. These subminiature Switches embrace today's technology requirements by allowing for a large number of Switches to fit within a faceplate. The long life snap-action design is protected from the environment by a silicon rubber boot, operating on a patented rolling sleeve principle that gives long sealed life. This version is a military grade momentary action, normally open, 2 circuit Switch with a black body and gray guarded button. Solder Terminals.

MPN: 5930-01-187-8796

Manufacturer: Otto

Special Press-fit Switch, 10 amps (resistive)and 1050VRMS at 28VDC or 115VAC, gray thermoplastic button, SPDT, watertight per MIL-PRF-8805 design 3, temperature range -55 degress C to 85 degress C

MPN: 5930-01-188-1490

Manufacturer: Otto

The P1-10052 is a sealed push button Switch with 4 LBS. momentary action. Snap action mil grade, double break Switch plus this version is a 2 circuit pushbutton Switch. Solder Terminals. Gray button (picture shows black but Switch button is gray).

MPN: 5930-01-188-1491

Manufacturer: Otto

Subminiature mil spec push button Switch. Solder Terminals, 2 circuit momentary. Sealed with black case and gray pushbutton.

MPN: 5930-01-188-4330

Manufacturer: Otto

Special Purpose rotary switch, For 12V DC systems, 8 Ohm, Ceramic insulator with embedded coil for effective heat dissipation, 7/16” -28 thread mounting stem, 15/32” (11.9mm) long, Plated steel case, 1.32” (33.5mm) diameter, 0.88” (22.4mm) long, Black plastic knob with metal insert and set screw, With round/bar black knob imprinted “Panel Lamps”, Two blade terminals.

MPN: 5930-01-189-3183

Manufacturer: LittelFuse

Micro Switch TL Series Toggle Switch, Single Pole Double Throw (SPDT) 3 Position (On - Off - On), Screw Terminals, Bar Actuator With 3 Fluorescent Buttons Attached to Lever By A Locking Type Internal Thread, Lever Cap Furnished Unassembled.

MPN: 5930-01-195-3037

Manufacturer: Honeywell

Micro Switch TL Series Sealed Toggle Switch, Single Pole Single Throw (SPST) 2 Position (Momentary ON - OFF), Screw Terminals, Locking Lever (F - Locked In Extreme Position, Opposite Keyway), Military Part Number MS24658-30F.Ampere/Voltage Range (Resistive Load): 0.75 A at 115 Vdc|0.5 A at 250 Vdc|0.5 A to 15 A at 0.5 Vdc to 28 Vdc|0.5 A to 10 A at 0.5 Vac to 7 Vac. UL/CSA L192: 10 A-125, 250, 277 Vac; 1/4 Hp-125 Vac; 1/2 Hp-250, 277 Vac; 3 A-125 Vac "L".

MPN: 5930-01-198-4726

Manufacturer: Honeywell

Switch Hardware. Flush hole to prevent crimping. See pdf for more information.

MPN: 5930-01-198-6330

Manufacturer: Grayhill

Micro Switch TW Series Toggle Switch, DPDT - 2 pole, 3 position (Momentary ON - ON - Momentary ON), Solder Terminal, Standard Lever. Ampere/Voltage Range (Resistive Load): 0.1 A to 5.0 A at 0.5 Vdc to 28 Vdc; 0.1 A to 5.0 A at 0.5 Vac to 115 Vac. UL/CSA L117: 5 A at 125 Vac.

MPN: 5930-01-199-2596

Manufacturer: Honeywell

Actuator for use with many micro Switches-refer to pdf.

MPN: 5930-01-200-1029

Manufacturer: Honeywell

Micro Switch TW Series Toggle Switch, DPDT - 2 pole, 3 position (ON-OFF-ON), IWTS Terminal, Standard Lever. Ampere/Voltage Range (Resistive Load): 0.1 A to 5.0 A at 0.5 Vac to 115 Vac; 0.1 A to 5.0 A at 0.5 Vdc to 28 Vdc

MPN: 5930-01-203-3624

Manufacturer: Honeywell

Military spec locking toggle Switch. 2 pole bonded seal (ON - NONE - ON). 8856K78 has positive make and break action and solder lug termination.

MPN: 5930-01-203-6858

Manufacturer: Safran

Environmentally sealed toggle Switch, 1 pole, SPDT - Momentary ON - OFF - Momentary ON, Screw Terminals, Watertight Sealed per MIL-STD-108E and designed to meet IP68, UL recognized & CSA certified.

MPN: 5930-01-208-2352

Manufacturer: Safran

Special 4 way toggle Switch, with 11/16 thread on case. Single pole 4 throw. Center off. Momentary contact with self return to center off. Black button. See attached PDF for more specs!

MPN: 5930-01-212-7286

Manufacturer: Otto

Pushbutton Switch, sealed against dust & moisture The P7 series incorporates OTTO's patented double break design in a significantly smaller package than the P1 series. These subminiature Switches embrace today's technology requirements by allowing for a large number of Switches to fit within a faceplate. The long life snap-action design is protected from the environment by a silicon rubber boot, operating on a patented rolling sleeve principle that gives long sealed life. This version is a military grade momentary action, normally open, 2 circuit Switch with a black body and button. Solder Terminals.

MPN: 5930-01-212-7288

Manufacturer: Otto

5930-01-216-8552 Push Switch

MPN: 5930-01-216-8552

Manufacturer: Otto

Subminiature basic switch, double break, snap-action, military grade, .20 inches wide, has 1/8 inch long turret Terminals, 5 oz operating force, SPDT-DB, Form Z, and silver/gold high current contacts.

MPN: 5930-01-220-6193

Manufacturer: Otto

Rugged military grade miniature toggle Switch. Lightweight, miniature and ruggedized snap-action. Positive detent action for safe Switching operation. Sealed. No tease contact operation. 1 pole. On-none-on. 15/32'' bushing.

MPN: 5930-01-222-3158

Manufacturer: Otto

Micro Switch TW Series Toggle Switch, DPDT - 2 pole, 3 position (ON-OFF-ON), Solder Terminal, Locking Lever (A) - Locked in three positions, Military Part Number MS27721-21-1A. Ampere/Voltage Range (Resistive Load): 0.1 A to 5.0 A at 0.5 Vdc to 28 Vdc; 0.1 A to 5.0 A at 0.5 Vac to 115 Vac. UL/CSA L117: 5 A at 125 Vac.

MPN: 5930-01-224-6444

Manufacturer: Honeywell

Rugged military grade miniature toggle Switch. Lightweight, miniature and ruggedized snap-action. Positive detent action for safe Switching operation. Sealed. No tease contact operation. 1 pole. On (momentary)- off - on (momentary). 15/32'' bushing.

MPN: 5930-01-226-0467

Manufacturer: Otto