Products Catalog
Electrical

Custom momentary action 2 Step pushbutton Switch, DPDT, momentary action, red button, black base, sealed to IP64.

MPN: 5930-01-626-8045

Manufacturer: Otto

Micro Switch NT Series Toggle Switch, SPST - 1 pole, 2 position (Momentary ON - OFF), Screw Terminal, Standard Lever, UL/CSA L192, IP67/IP68 sealed, transportation grade toggle. Unassembled Hardware is included. MICRO Switch NT Series toggle Switches meet the need for a rugged, cost-effective toggle Switch. Quality construction features include a seal between the toggle lever and bushing, and between the cover and case. These Switches can be used where Panels are subject to splashes, hosedowns, or outdoor environments. The ""Easy-Start"" threaded bushing enables quick alignment of mounting nut to decrease the chance of cross threading. The Panel stand-off with O-ring feature available on some listings, eliminates the need for behind-the-Panel Hardware, provides uniform Panel height, and provides a Panel to cover seal.

MPN: 5930-01-631-8057

Manufacturer: Honeywell

Battery Switch. Features heavy duty silver plated contacts. One piece die-cast housing sealed with O-rings at base and mounting stem to keep out dust and moisture. Two 3/4" and two No 10-32 copper alloy stud Terminals hex nuts and lock washer. Continuous Rating (Make Break), Large Studs -180 Amps, Small Studs - 20 Amps, Intermittent Rating (Carrying), Large Studs - 1000 Amps (20 sec. "On" - 5 Minutes "Off"). The 51-918 is the same Switch as the Pollak Aftermarket 51-918P.

MPN: 5930-01-640-8230

Manufacturer: Pollak

Military spec subminiature sealed pushbutton Switch. Special 5 Terminal design allows for custom circuitry, solder Terminals, black body red button.

MPN: 5930-01-641-8338

Manufacturer: Otto

Large lever toggle Switch. Circuitry is on none on Single pole. 8868K54 is a miniature positive action locking toggle with IWTS Terminals.

MPN: 5930-01-642-2929

Manufacturer: Safran

Micro Switch NT Series Toggle Switch, DPDT - 2 pole, 2 position (ON-ON), Screw Terminal, Standard Lever, UL/CSA L191, IP67/IP68 sealed, thermoplastic case. MICRO Switch NT Series toggle Switches meet the need for a rugged, cost-effective toggle Switch. Quality construction features include a seal between the toggle lever and bushing, and between the cover and case. These Switches can be used where Panels are subject to splashes, hosedowns, or outdoor environments. The "Easy-Start" threaded bushing enables quick alignment of mounting nut to decrease the chance of cross threading. The Panel stand-off with O-ring feature available on some listings, eliminates the need for behind-the-Panel Hardware, provides uniform Panel height, and provides a Panel to cover seal.

MPN: 5930-01-645-9147

Manufacturer: Honeywell

Micro Switch TL Series Toggle Switch, Single Pole Double Throw (SPDT) 2 Position (On - On), Screw Terminals, Locking Lever (Locked Out Of Center Position) With White Button Cap, FAA-PMA Approved.

MPN: 5930-01-650-0316

Manufacturer: Honeywell

Rotary Switch, 3 position, double pole, Maintained-Maintained-Maintained circuitry, standard rating without Terminal barriers, with Connector keying pin, black plactic Knob, IP68S sealed, snap-in Panel mounting. No LED light source.

MPN: 5930-01-652-3482

Manufacturer: Otto

Sealed rugged dome momentary pushbutton Switch. Normally open. Dust tight IP64. Red button flush dome. Plastic housing. These can be shipped to you in 2-3 working days. They are built for you from stock components. "Disregard any out of stock notice, because we custom assemble them, however, they are NCNR." Assembly items that are in stock need at least 24 hours to process prior to shipping.

MPN: 5930-01-652-6640

Manufacturer: Otto

Special aircraft environmentally sealed limit Switch with Lead wire termination, see attached PDF.

MPN: 5930-01-654-2520

Manufacturer: Honeywell

Ignition Switch, sealed keySwitch, 10A at 12V, 5A at 24V, 3A at 36V and 2A at 48V DC. three positions: Accessory - Ignition/Accessory - Start. Spring return to off. with anti restart, no key boot Constructed from engineering thermoplastic and is fully sealed using O-rings and ultrasonic welding to protect Switch to IP67 (with Connector installed), Accepts Deutsch-type Connector, Plastic facenut and nickel-plated brass backing nut, Supplied with two matching keys with protective key boot.

MPN: 5930-01-658-9927

Manufacturer: LittelFuse

Sealed per IP68S, Mil toggle Switch. 2 pole. Off-None-On. Lever lock -locked out center position. Resistant to shock and vibration.

MPN: 5930-01-660-3436

Manufacturer: Otto

Black Rugged Sealed 16 amp Rocker Switch, Momentary on -none-off SPST, No Light, No Legend.

MPN: 5930-01-660-5757

Manufacturer: Otto

V-series Contura style Switch, single pole, On-None-Off, rated 20A @ 12V, 8 Terminal base style - .250 quick connect tab termination with no barriers, sealed, 12V incandescent Lamp, black bracket, no Lens, no Actuator. The V-Series Switches are well known for their cutting edge design, high quality, maximum performance and unmatched reliability. These snap-in rocker Switches offer countless options for ratings, circuits, colors, illuminations and symbols. These single or double pole Switches feature removable Actuators in a choice of Actuator styles and colors, which may be purchased and stocked separately. An optional Plug-in Terminal Connector enables pre-wiring of wire harness. Certified to IP66, the V-Series Contura Switches offer complete protection against dust, prolonged spray and submersion under Pressure and are recognized to UL1500 - Ignition Protection for Marine Products. These Switches are vibration, shock, thermoshock, moisture and salt spray resistant with operating temperature ranging from -40 C to 85 C. The Contura II & III styles feature square and bar Lens options and are constructed of thermoplastic polycarbonate with hard nylon or soft touch elastomer overlay. The Contura II features 2 rows of raised bumps and the Contura III features 3 rows of ridged finger traction on top and bottom of the rocker.

MPN: 5930-01-662-4376

Manufacturer: Carling Technologies

76 series DIP Switch, 8 position SPST rocker. Sealed base standard. See pdf specifications for additional information.

MPN: 5930-01-662-8264

Manufacturer: Grayhill

Micro Switch Environmentally Sealed, Enclosed Limit Switch, roller plunger, 2X SPDT circuitry, rated for 1 amp (resistive) at 28Vdc, with gold contacts.

MPN: 5930-01-664-8018

Manufacturer: Honeywell

Micro Switch NT Series Toggle Switch, SPDT - 1 pole, 3 position (ON-OFF-ON), Screw Terminal, Standard Lever, UL/CSA L191, IP67/IP68 sealed, transportation grade toggle. Unassembled Hardware is included. MICRO Switch NT Series toggle Switches meet the need for a rugged, cost-effective toggle Switch. Quality construction features include a seal between the toggle lever and bushing, and between the cover and case. These Switches can be used where Panels are subject to splashes, hosedowns, or outdoor environments. The ""Easy-Start"" threaded bushing enables quick alignment of mounting nut to decrease the chance of cross threading. The Panel stand-off with O-ring feature available on some listings, eliminates the need for behind-the-Panel Hardware, provides uniform Panel height, and provides a Panel to cover seal.

MPN: 5930-01-665-6938

Manufacturer: Honeywell

Micro Switch NT Series Toggle Switch, SPDT - 1 pole, 3 position (Momentary ON - OFF - ON), Screw Terminal, Standard Lever, UL/CSA L192, IP67/IP68 sealed, transportation grade toggle. Unassembled Hardware is included. MICRO Switch NT Series toggle Switches meet the need for a rugged, cost-effective toggle Switch. Quality construction features include a seal between the toggle lever and bushing, and between the cover and case. These Switches can be used where Panels are subject to splashes, hosedowns, or outdoor environments. The ""Easy-Start"" threaded bushing enables quick alignment of mounting nut to decrease the chance of cross threading. The Panel stand-off with O-ring feature available on some listings, eliminates the need for behind-the-Panel Hardware, provides uniform Panel height, and provides a Panel to cover seal.

MPN: 5930-01-665-6945

Manufacturer: Honeywell

Sealed rugged pushbutton Switch. Positive tactile feel. 10 amp. Solder Terminals. Normally open. Black button. Water tight.

MPN: 5930-01-665-9290

Manufacturer: Otto

76 series DIP Switch, 8 position SPST rocker. Sealed base standard. Spring and ball contact. Top tape seal option. See pdf for more information.

MPN: 5930-01-667-3790

Manufacturer: Grayhill