Electrical
Lighting

LED non reLampable long iife difFused green 28VDC LED. For Panel mounting through a 5/32 (0.156) dia. hole; snap fits, needs no mounting Hardware. No Lens for maximum viewing angle. Supplied with 6 wire leads. Assembly items need at least 24 hours to process prior to shipping.

MPN: 4320-01-548-2005

Manufacturer: Sloan

Panel mount LED indicator, 5mm (T 1 ) Red LED - R660, Water Clear, 4000 mcd, 22 Degree Viewing Angle, Translucent, Flat Lens ask us about other colors.

MPN: 5905-01-052-5708

Manufacturer: Sloan

Indicator Light base Assembly

MPN: 6210-00-150-1966

Manufacturer: ElectroSwitch

Off white indicator Lens Cap

MPN: 6210-00-283-9976

Manufacturer: ElectroSwitch

Miniature incandescent Indicator Light with light shield Lens Cap for mounting hole 11/16 inch-note we will show out of stock, we can however build these in 1 week- we assemble here. Lamp not included uses T-3 bulb. Assembly items need at least 24 hours to process prior to shipping.

MPN: 6210-00-299-5538

Manufacturer: Dialight

Red Light shield PMI Cap.

MPN: 6210-00-316-1258

Manufacturer: Dialight

DataLamp holder with collar. Mounting hole is 3/8 and 508-7438-504 has solder blade Terminals. Nut and washer included. Note this is the Lamp holder only - no Lens included.

MPN: 6210-00-516-1577

Manufacturer: Dialight

Panel mount Indicator Light Assembly. Assembly items need at least 24 hours to process prior to shipping.

MPN: 6210-00-717-2900

Manufacturer: Dialight

Miniature incandescent indicators, Panel mount indicator Assembly with light shield cap. 11/16 ich mounting. 2 to 55 volt operation. Push pull action. Lamps not included. Uses T-3 miniature bayonet Lamps. These are NCNR as we customer build these for you. Assembly items need at least 24 hours to process prior to shipping.

MPN: 6210-00-841-8203

Manufacturer: Dialight

Incandescent Panel mount indicator (PMI) cap, no Lens, Light shield PMI Camp, screw Terminals, for T-3 1/4 mini bayonet, watertight, polished crome finish.

MPN: 6210-00-888-2648

Manufacturer: Dialight

Incandescent Panel mount indicator Assembly complete with light shielding Panel mount indicator cap for S6 candelabra screw base Lamps. Screw Terminals. Brass/nickel body. For mounting in I inch clearance hole. For 6-250 volt operation. We assemble these for you (without Lamp). Disregard inventory stock out note-we custom kit these for you and can deliver these in 7 days. Lamps not included. Same device as 047-0901-2900-201. Assembly items need at least 24 hours to process prior to shipping.

MPN: 6210-00-935-6919

Manufacturer: Dialight

EMI suppressed Indicator Light Assembly-NCNR- allow 6 weeks for delivery.

MPN: 6210-01-166-7635

Manufacturer: ElectroSwitch

Indicator Light. T-1 midget flange Assembly dimmer style Indicator Light. 15/32" mounting hold required. Red Incandescent. Panel mount indicator Assembly. Solder Terminals. Water tight, dust tight, oil tight. Same as LH89/1-LC36RD2. Allow 5-6 days for delivery as we build them here from sub components. Assembly items need at least 24 hours to process prior to shipping.

MPN: 6210-01-336-2688

Manufacturer: Dialight

LED non-reLampable long life difFused amber 28VDC LED. For Panel mounting through a 5/32 (0.156) dia. hole; snap fits, needs no mounting Hardware. No Lens for maximum viewing angle. Supplied with 6 wire leads.

MPN: 6210-01-669-5246

Manufacturer: Sloan

New long life 90mm HIGH beam LED headLamp. Dialight's new SAE/DOT FMVSS108 Compliant 90mm LED headLamp is designed for heavy duty vehicles. With its dual voltage capabilities (12 and 24V), it will easily replace any 90mm halogen / HID light in the market as a retrofit without any need for retooling. All of Dialight’s long life LED luminaires are designed to meet the most demanding specification criteria while offering maximum energy savings, reduced maintenance costs, and a superior quality of light. 5 year limited warranty. Expected life >10 Years. Alignment screws included, No frequent re-Lamping, Protection against over-voltage / surge / spikes, Less prone to alignment errors, Wide beam pattern, Industry first reflector based design, Weatherproof design. Special price! Allow 2-3 week delivery for quantities in excess of what we show.

MPN: 6220-01-665-5488

Manufacturer: Dialight

New long life 90mm low beam LED headLamp. SAE/DOT FMVSS108 Compliant 90mm LED headLamp is designed for heavy duty vehicles. With its dual voltage capabilities (12 and 24V), it will easily replace any 90mm halogen / HID light in the market as a retrofit without any need for retooling. Long life LED luminaires are designed to meet the most demanding specification criteria while offering maximum energy savings, reduced maintenance costs, and a superior quality of light. 5 year limited warranty. Expected life >10 Years. Alignment screws included, No frequent re-Lamping, Protection against over-voltage / surge / spikes, Less prone to alignment errors, Wide beam pattern, Industry first reflector based design, Weatherproof design. Specially priced! Allow 2-3 week delivery for quantity in excess of what we show.

MPN: 6220-01-665-5489

Manufacturer: Dialight

T1 Lamp clear with red base 28V .024 amp .15 MSCP. Also known as 4-6126-118.

MPN: 6240-00-168-0411

Manufacturer: ElectroSwitch

Candelabra screw incandescent Panel mount indicator (PMI) base, S-6 Lamp size Lamp holder, flush screw Terminals, 1 inch, polished chrome, for 6 to 250V operation. Assembly items need at least 24 hours to process prior to shipping.

MPN: 6240-01-306-8094

Manufacturer: Dialight

Incandescent Panel Mount Indicator (PMI) Base, 11/16 inch mounting hole, 2-120 volts, solder Terminals, for T-3 1/4 mini bayonet incandescent Lamps

MPN: 6240-01-455-9853

Manufacturer: Dialight